zap-lop是什么意思

网络释义

用法例句

The technology of roll-bonding was applied to prepare the foaming precursor in this paper.

将轧制复合工艺应用于发泡预制体的制备,研究了粉末致密化过程与面板/芯层的结合机制。

Author studied the production technology of aluminum foam sandwich prepared by roll-bonding/powder metallurgy foaming process in this paper,and analyzed the effect of main technological conditions on foaming structure of sandwich layer,and optimum technological parameters were finally obtained.

研究了采用轧制复合-粉末冶金发泡法制备的泡沫铝夹心板的生产工艺,探讨了主要工艺条件对芯层泡沫结构的影响,得到了优化的工艺参数。

The dynamic temperature field during roll-bonding combined with high-frequency alternating current heating has been numerically simulated by a simplified model.

通过数值模拟获得了高频加热-轧制复合过程中的动态温度场。

Preparation of Mg-Li alloy/Al composite plate by cold-rolling bonding process;

冷轧复合工艺制备超轻Mg-Li合金复铝板

A powder-A1 plate sandwich rolling processing is proposed for preparation of aluminum alloy foam sandwich with a metallurgy bonding interface.

通过粉末-铝板复合轧制方法制备出一种界面为冶金结合的泡沫铝夹芯板。

The foam aluminum sandwich panels with metallurgy bonding interface are prepared by the sandwich rolling method,the two Al face-sheets are stacked and mixed powders with foam agent are put between them,which are sandwich rolled and a foaming precursor is obtained,then it is foamed in heating furnace.

采用复合轧制的方法,即将带有发泡剂的混合粉末置于两铝面板之间进行复合轧制使之成为预制发泡体,然后再在炉中发泡的方法,制备界面为冶金结合的泡沫铝夹芯板,通过摆锤冲击实验,研究界面为冶金结合的泡沫铝夹芯板与胶接夹芯板的冲击性能的区别。

The existing problems and solutions are presented,based on which the ways how to improve the property of WCp/steel-based compound rollers are discussed.

综述了轧辊材料的发展状况以及轧辊的失效形式,重点阐述了WCP/钢基复合材料及其复合轧辊的制备工艺,指出了制备WCP/钢基复合材料工艺中存在的问题和解决办法,并在此基础上探讨了提高WCP/钢基复合轧辊质量的措施和途径。

The near net shape composite roller has been obtained.

首次尝试了用热等静压法（ＨＩＰ）制造大型钢管张力减径机复合硬质合金轧辊，并获得了近实物尺寸的复合轧辊。

The Study on the Electrical Properties and the Cold Rolling Technique for Copper and Aluminum Composite Laminates;

铜铝轧制复合板导电特性及复合技术的研究

Study on Inhibition Mechanism of the Interface Compounds in Steel-Aluminium Rolling

钢铝轧制复合界面化合物的抑制机理研究

Preparation of Aluminum Foam Sandwich Perform by Roll-bonding Process

轧制复合法制备泡沫铝夹心板发泡预制坯

Studies on the Roll-forming and Properties of Stainless Steel/Aluminum/Stainless Steel Laminated Sheet;

不锈钢/铝（合金）/不锈钢复合材料轧制复合与性能研究

Bond Rolling Principles and Heat Treatment of Cu/Al Clad Sheet

铜铝轧制复合变形规律及热处理的研究

Experiment Study on the Techniques of the Cold Rolling Steel Matrix Composites;

冷轧钢基复合材料轧制工艺实验研究

Composite rolling of three-layer iron-based metals of 25Cr5MoA steel/micro-alloyed steel/Q235 steel

25Cr5MoA钢/微合金钢/Q235钢的复合轧制

Study on rolling of forged W_p/2024Al composites

锻造W_p/2024Al复合材料的轧制研究

Bond Rolling Principles of Laminated Precision Alloy Materials;

精密合金层状复合材料轧制变形规律的研究

Research of Compound Rolling Deformation Rules and Technology Optimize on Brazing Foil of Aluminum Alloy;

铝合金钎焊箔材复合轧制规律及工艺优化

NUMERICAL SIMULATION IN ELECTROSLAGROLL CLADDING EQUIPMENT DESIGNING

电渣工艺复合轧辊制造装置数值模拟辅助设计

Neck Shrinkage Control of Composite Rollers with Nodular Iron as Core Material

离心铸造球铁芯复合轧辊辊颈缩松的控制

Roll Compaction and Subsequent Heat Treatment of Fe-Si Composite Powder;

铁、硅复合粉末的轧制成型与后续热处理

The Study of the Process and the Rupture on the Explosion Welding-Rolling Ti-steel Composites Plate;

爆炸焊接—轧制钛钢复合板——工艺和断口形貌研究

Research and FEM Simulation on Rolling Deformation of Ag/Cu Composite

Ag/Cu金属复合材料轧制变形研究及有限元模拟

Lateral spreading deformation behavior in flat rolling of copper cladding aluminum composite rods

铜包铝复合棒材平辊轧制宽展变形行为

Microstructure and Properties of Rolling Cu-10Fe-2Ag-0.15Zr In-situ Composites

轧制变形Cu-10Fe-2Ag-0.15Zr原位复合材料的组织和性能

Study on 3 layer high chromium iron roller casting

高铬三层复合结构铸铁轧辊的试制研究