cohesion是什么意思

网络释义

用法例句

The oxygen content in Zn-coat has great effect on adhesion of rubberized cord with rubber.

锌层中氧含量对胶带钢丝绳与橡胶粘合力有很大的影响 ,在生产过程中 ,无法避免锌与氧接触生成ZnO。

The influence of sulfur,zinc oxide,accelerator,carbon black and process on the adhesion between rubber and brass plated steel cord was investigated by the orthogonal design method and the comparative test.

采用正交设计法和对比试验法，考察了硫黄、氧化锌、促进剂、炭黑以及某些工艺条件对胶料与镀铜钢丝帘线粘合力的影响。

Effect of cobalt salt on adhesion strength between cord compound and brass-plated steel cord in radial tire;

钴盐对子午线轮胎帘布胶镀铜钢丝帘线之间粘合力的影响

The results showed that the scorch time extended,the aging properties improved significantly,the adhesion strength between rubber and steel cord increased,and the vulcanization delayed by using RF90 resin instead of resorcinol resin in 3 adhesion systems.

结果表明,在3个体系中用RF 90树脂替代间苯二酚可以延长胶料焦烧时间,明显改善胶料的耐老化性能,提高老化前后胶料与钢丝帘线的粘合力,但同时降低了胶料的硫化速度。

The results showed that the reversion resistance,the physical properties of thermal oxidative aged vulcanizate or overcured vulcanizate,and the adhesion strength between rubber and cord were improved by adding 2 phr of DL 268 to NR/SBR compound;and the fatigue heat build up of vulcanizate decreased.

试验结果表明，在ＮＲ／ＳＢＲ 胶料中加入２份硫化剂ＤＬ２６８ ，可改进抗硫化返原性，提高硫化胶在热氧老化或过硫化状态下的物理性能及胶帘线之间的粘合力，降低硫化胶的疲劳温升。

The cohesion between rubber and steel wire is 438N per piece for 2+2×0.

拉拔出的钢丝与橡胶粘合力:2+2×0。

The binding forces of bead wire with rubber at various technology parameters in the producing process of electroplating copper on bead wire were studied.

对胎圈钢丝电镀紫铜生产过程中不同工艺参数下钢丝粘合力的变化进行研究和分析,探索了影响钢丝粘合力的工艺因素,获得了最佳生产工艺参数,达到了预期目标。

To introduce the matters needing attention in the test for binding force of bead wire with rubber,which are shown from designing of die,thinning of size,cutting of steel wire specimen,size packing in die and taking steel wire out et

介绍在胎圈钢丝与橡胶粘合力试验中应注意的事项 ,从模具设计、胶料的薄通、钢丝样品的截取、胶料的装模操作及钢丝的抽出等几个方面进行了说

cohesive force

凝聚力，内聚力，粘合力

test method for adhension of corrugated fibreboard

瓦楞纸板粘合力试验方法

Analyses of the Main Factors Affecting the Adhesion between Steel Cord and Rubber

影响钢帘线与橡胶粘合力的因素分析

Influence of Tincture Iodine and Povidone Used for Disinfection of Skin on Adhesion of Surgical Adhesive Dressing Membrane

使用碘酒与碘伏消毒皮肤对粘胶薄膜粘合力影响的研究

Use high-temperature net belt to press, so as to add adhering abilty of the product.

采用耐高温网带压著，提高产品的粘合力。

unbonded tendon

未粘合的预应力钢筋

The strength of the assemblage is bond-strength limited.

纤维集合体的强力受粘合强力的限制。

Factors of Effect on Adhesive Strength of Graft Neoprene Adhesive

氯丁接枝胶粘剂粘合剥离力的影响因素

Gullibility: Measure of speed of paper adhesive bonding and its strength.

胶粘性能:胶粘剂对纸品的粘合速度和强度的能力。

made by combining fibers with a binder using heat and pressure.

通过热和压力使化合光纤粘合。

STUDY OF FRICTIONAL STICK SLIP BY CONTROLLING COMBINATION OF FORCE AND DISPLACEMENT

用力和位移组合控制研究摩擦粘-滑

Dynamic Analysis of the Ship-water-chamber Coupled System Based on Viscosity;

考虑粘性的船－水－厢耦合系统动力分析

Study on the mechanical properties of GAP/HTPB binder films

GAP/HTPB粘合剂固化胶片力学性能研究

coefficient of kinetic viscosity

动力粘性系数，动力粘度

Integrated Application of Bonded and Unbonded Prestressed Technology in Flat-slab Structure Engineering

有粘结与无粘结预应力技术在梁板结构工程中的综合应用

THE ANALYSE OF REINFORCED CONCRETE MEMBER'S POSITIVE SECTION CARRYING CAPACITY WHICH IS STRENGTHENED WITH CFRP AND ARMOR PLATE

粘贴CFRP与粘贴钢板复合加固混凝土梁正截面承载力分析

testing method for adhesion of bonded fabric

粘接布的粘附力测定法

The adhensive forces were found to be related to the metal to oxygen chemical-bond energy.

已经发现，粘着力与金属-氧的化学结合能有关。