director surface是什么意思

网络释义

用法例句

In this paper,the law of parameter B and 1/PQ influence contact spot is obtained in processing standard double curved surface gear of BJ130 with analyzing experiment.

通过实验分析得出参数B和1／PQ＇，在加工BJ130汽车后桥准双曲面齿轮时，对接触斑点的影响规律。

In this paper, two control parameters, △Ax and △ x are influence of increased, the cuding gear test is made by processing standard double curved surface gear of BJ130.

本文提出增加两个控制参数△Ax与△x，并针对BJ130汽车后桥准双曲面齿轮做切齿试验，分析结果，找出参数△Ax和△x对接触斑点的影响规律。

Modeling and FEM Analysis of the Hypoid Gear Based on ANSYS;

基于ANSYS的准双曲面齿轮建模及有限元分析

Tooth Surface Parameterization and Contacting Visualization of Hypoid Gear;

准双曲面齿轮齿面参数化和接触可视化方法研究

Thus,using modified-roll method,4-axis CNC spiral bevel gear machine can manufacture hypoid gear.

这样,在四轴数控铣齿机上可以实现变性法加工准双曲面齿轮。

Experimental investigation on running performance of hypoid gears;

准双曲面齿轮副台架性能试验

Based on NC machining principle of hypoid gears, three-dimensional modeling method for CNC machine tool, workpiece and cutter is introduced.

根据准双曲面齿轮数控加工原理,提出了CNC铣齿机、齿轮毛坯和盘铣刀实体模型的具体构建方法;利用简化的齿轮毛坯实体模型和盘铣刀实体模型做布尔减运算,在计算机上实现了模拟工件材料的去除过程;通过加工仿真结果和实际加工结果对比,验证了加工仿真方法的正确性。

This paper researches the design method of shrinkage tooth with equal tip clearance of hypoid bevel gear pair with half generating method, which will increase the contact ratio,engagement factor,load capacity and stability of the transmission.

研究了用半展成法加工的收缩齿等顶隙准双曲面锥齿轮副的设计方法,以求提高齿轮重迭系数、承载能力和传动平稳性。

hypoid generator

准双曲面齿轮加工机床

Terminology for bevel and hypoid gears

GB/T12370-1990锥齿轮和准双曲面齿轮术语

Accuracy of bevel and hypoid gears

GB/T11365-1989锥齿轮和准双曲面齿轮精度

hypoid gear tester

准双曲面齿轮滚动检查机

Design and Manufacture of the Hypoid Gear of Heavy Duty Vehicle;

重载汽车准双曲面齿轮的设计与制造

Theoretical Tooth Surface Deduction and Simulation of Orion Hypoid Gears

奥利康准双曲面齿轮的理论齿面推导及仿真

Application of Contact Zone Measurement for Hypoid Gear Based on Stereo Vision;

立体视觉在准双曲面齿轮接触区检测中的应用

Research on Simulation and Numerical Controlled Processing Theory of Hypoid Gears;

准双曲面齿轮数控加工理论与仿真研究

The Analysis of High-Speed Main Drive Axle Hypoid Reducer Gear

高速驱动桥主减速器准双曲面齿轮特性分析

The Calculation of Cutting and Setting and the Design of Program Module for the Hypoid Gears

弧齿准双曲面齿轮加工调整计算与程序设计

Tooth Surface Parameterization and Contacting Visualization of Hypoid Gear;

准双曲面齿轮齿面参数化和接触可视化方法研究

Function-oriented Design and Theoretical Verification of Point-contact Tooth Surfaces of the Hypoid Gear Drive with the Formate Gear

成形法大轮准双曲面齿轮传动点啮合齿面主动设计与理论检验

The“ Tool Pan Tilted method” is a high effect method to generate spiral-bevel gears and Hypoid gears.

刀倾半展成法是加工螺旋锥齿轮和准双曲面齿轮的有效方法。

Edge Detection and 3-D Digitalization of the Hypoid Gear Contact Spot

准双曲面齿轮接触斑点边界提取及其三维数字化

The integral type housing, hypoid gear design has the centerline of the pinion set above the centerline of the ring gear.

集成型的差速室、准双曲面齿轮的设计中，小齿轮组中心线在环形齿轮的中心线之上。

hyperboloidal gear

双伞齿轮，双曲面齿轮

The authors show that the hyperboloid of one sheet and the hyperbolic paraboloid are ruled surfaces.

作者证实：单叶双曲面和双曲抛物面是直线曲面。

Projectivity of Hyperboloids of One or Two Sheets;

双曲抛物面与单叶双曲面的射影性质