Modular machine是什么意思

网络释义

用法例句

Design of Fluid Drive and Electrical Control System for Bore Modular Machine Tool;

钻孔组合机床液压传动和电气控制系统的设计

An example of the PLC programming method in modular machine tool automatic control;

组合机床自动控制PLC程序设计实例

The application of lap valves for hydraulic system design of modular machine tool;

叠加阀在组合机床液压系统中的应用

This paper introduces the application of FXON PLC from Japan in combined machine tools.

介绍了日本三菱公司FXON系列PLC在两工位钻孔、攻丝组合机床上的应用;分析了组合机床的组成、功能及控制要求;给出了输入输出分配表;编制自动控制程序、状态转移图,并实现了故障检测诊断。

The combined machine tool can make machining quality and productivity improved substantially,and so give forth good social and economic benefit.

通过制定切实可行的、合理的工艺方案,设计制造了四轴数控钻孔组合机床,加工质量和生产效率得到大幅度提高,经济和社会效益显著。

combined machine tools that the flexible refitment of machines instead ofpurcbasing a new one with identical function can save investment of 130 000 yuan each.

通过对一批传统组合机床进行柔性化改造工程的技术经济分析，表明进行柔性化改造的设备比购置同样功能传统机床节约投资１３１元／台，１０年内平均节约费用７２７１８。

According to the characteristics of the design and manufacture of modular machine tools,we use Vc language,Access database and Solid Edge CAD system to select the design projects and to calculate the costs of the machine tool,and then we develop the practical CAD system of modular machine tools with the help of the mutual technology on screen.

根据组合机床设计制造的特点，从方案设计选型和成本估算入手，采用 Ｖ Ｃ《编程语言，集数据库管理系统 Ａｃｃｅｓｓ 和 Ｃ Ａ Ｄ 系统 Ｓｏｌｉｄ Ｅｄｇｅ 于一体，借助于屏幕交互技术，研制了实用组合机床 Ｃ Ａ Ｄ 系统。

The application of PLC to automatic control system of modular machine tools has been introduced,the hydraulic system's principles of boring and turning modular machine tools were discussed and the hard ware structure and procedure design of PLC control were presented.

介绍了可编程序控制器（ＰＬＣ）在组合机床自动控制中的应用探讨了镗孔车端面组合机床的液太系统工作原理、ＰＬＣ控制的硬件结构和程序设计

The method for de- signing pncumatic logic circuit and crank drive have been used on small-size modular machine tools.

本文论述了把气动逻辑回路设计法和曲柄传动应用于小型组合机床上的实践经验和系统的优点,可供机床设计和教学参考。

Application of PLC in the Control of Bore Modular Machine;

PLC在钻孔组合机床控制中的应用

This article introduces the automatic control system of 8-station drilling and boring modular machine with PLC and Touch Panel,and gives the hardware configuration and the principle to design software of the PLC control system according to the principle and control requirement of the machin

介绍了PLC与触摸屏控制的八工位钻镗组合机床自动控制系统。

PLC was applied to thoroughly reform the original modular machine which consists of relays,contactors and solenoid valves,and discusses the function of control system and the design of hardware and software in detail.

应用PLC对继电器、接触器和电磁阀为主要器件组成的组合机床控制系统进行技术改造,详细地讨论了控制系统的功能以及软硬件的设计,实际使用表明系统获得了良好的控制效果。

This article discusses a distributed collaborative design about combined machine.

本文就组合机床的分布协同设计工作进行了论述,重点讲述了基于CORBA的分布协同设计系统框架及其构成,项目协同管理、协同计算与仿真、数据访问三种关键技术的解决,特别对分布状态下的互操作问题进行了详细的说明。

Based on the large amount of standard units and prototypes in fixture design of combined machine of drilling and turning, the fixture design method based on 3D model of workpieces is presented, and the design methods of positioning, clamping, and guiding device are researched.

针对箱体类零件钻镗组合机床夹具设计中存在的大量标准件和典型结构提出基于被加工件三维模型的箱体类组合机床夹具设计方法,研究了夹具的定位设计、夹紧设计和导向设计。

The cylinder blocks of Wuxi Diesel Engine Works are machined in combined machines with roller conveyors.

无锡柴油机厂柴油机气缸体加工是在组合机床 +传送带上完成的。

The problem of the combination of machines for flow shop quality inspection is studied in this paper.

研究了一类流水作业质量检验的机床组合问题。

indexing-drum machine

回转鼓轮式组合机床

center column type modular machine too

中央立柱式组合机床

two-side horizontal boring transfer machine

双面卧式镗孔组合机床

Terminology for metal-cutting machine tools--Modular machine tools and transfer lines

GB/T6477.2-1986金属切削机床术语组合机床及组合机床自动线

Development of the Modular Machine Tool DKM010 for Cylinder Block

发动机缸体专用DKM010组合机床的开发

Modular units for machine tool construction--Slide units--Dimensions

GB/T3668.4-1983组合机床通用部件滑台尺寸

drum type double face drilling and boring combined machine

转鼓式双面钻镗组合机床

multiple station combined machine for piston machining

活塞加工多工位组合机床

index table machine

多面回转工作台式组合机床

Development and Study of Intelligent CAD System for Cutting Tools Used on Modular Machine Tool;

组合机床刀具智能化CAD系统开发

The Design on the Activities Template Drilling and Tapping Modular Machine Tool

活动模板式钻孔与攻丝组合机床设计

Design of Modular for Machining of Balance Holes on Gear Pump Side-plank

齿轮泵侧板卸荷孔加工组合机床设计

Development of High-Effectiveness Strong Milling with Large Cutting

大走刀高效强力铣削组合机床的研制

Modular units for machine tool construction--Wing bases for slide units--Dimensions

GB/T3668.6-1983组合机床通用部件滑台侧底座尺寸

Modular units for machine tool construction--Wing base for columns--Dimensions

GB/T3668.8-1983组合机床通用部件立柱侧底座尺寸

Modular units for machine tool construction--Centre bases and columns--Dimensions

GB/T3668.7-1983组合机床通用部件中间底座和立柱尺寸

Modular units for machine tool construction--Integral way columns--Dimensions

GB/T3668.11-1983组合机床通用部件有导轨立柱尺寸

Design of Fluid Drive and Electrical Control System for Bore Modular Machine Tool

钻孔组合机床液压传动和电气控制系统的设计