The paper presents an investigation on microstructure and metallurgical behavior of copper cladding steel wire produced by liquid and solid bonding and rolling process at certain process condition.
以液固相复合-轧制工艺生产的铜包钢线为研究对象,研究了在特定工艺条件下铜/钢界面的组织组成及其界面区的冶金行为。
The paper presented an investigation on microstructure and metallurgical behavior of copper cladding steel wire produced by inverted casting method at certain process condition.
本文以反向凝固法生产的铜包钢线为研究对象,研究了在特定工艺条件下铜/钢界面的组织组成及其界面区的冶金行为。
The influences of preheating temperature and surface treatment method on interface of copper clad steel wire produced by liquid-solid bonding process were studied.
研究了液-固相复合工艺制备铜包钢线时,钢线预热温度和表面处理对界面结合质量的影响。
The paper presents an study of copper clad steel wire produced by liquid and solid bonding method.
以液固相复合法生产的铜包钢线为研究对象 ,利用光学显微镜和扫描电镜的能谱等手段分析了铜 /钢界面区的组织形态和成分组成 。
The characteristics and technical status quo of manufacturing process for four types of copper clad steel wires are presented.
本文介绍了四种铜包钢双金属线生产工艺的特点和现状 ,指出了水平连铸铜包钢工艺中的关键问题 ,以期为我国铜包钢线实现国家化 ,降低成本提供一点有益的参
The paper presents an study of copper clad steel wire produced by liquid and solid bonding method.
以液固相反向凝固法生产的包铜钢线为研究对象,利用有限差分法分析了铜在钢线芯体上的浸覆过程;得出了特定工艺条件下铜层包覆比的理论变化规律。
The model of dealing with the heat resistance at the interface of Cu/Fe in the numerical simulation of temperature fields of copper clad steel wire produced by liquid and solid inverted solidification process is presented.
以液固相反向凝固法生产的包铜钢线为研究对象,提出了反向凝固过程中在数值模拟时铜-钢界面处接触热阻的处理模型。
Based on the production of copper clad steel wire, the characteristic of inversion casting is introduced, and the rule of parameter influencing cladding specific value systematically value studied.
以包铜钢线为研究对象, 介绍了反向凝固复合工艺特点, 系统地研究了各工艺参数对包复比的影响, 并对实验结果作了理论分
Research on the On-line copper-clad steel diameter measuring instrument based on linear CCD
基于线阵CCD在线铜包钢线径测量仪的研究
Structure design and tube-weld cladding manufacturing technology for copper-clad steel wire
包覆焊接法铜包钢线的结构设计和生产工艺
Study on Bimetallic Wire of Copper Clad Aluminum and Copper Clad Steel by Clad-Drawing;
包覆拉拔法铜包铝、铜包钢双金属导线的研究
Copper winding wires with silk covering-Bunched wires with silk covering
GB/T11018.3-1989丝包铜绕组线丝包束线
Copper winding wires with silk covering--Single wire with silk covering
GB/T11018.2-1989丝包铜绕组线丝包单线
drawing-pin, of iron or steel (excl. coperheaded)
绘图钉,铁或钢制(不包括铜头的)
nail wire of iron or steel (excl. copper headed)
销钉,铁或钢制(不包括铜头的)
hook nail of iorn or steel (excl. copperheaded)
钩钉,铁或钢制(不包括带铜头的)
Surface Coating of Copper on Iron Powder from Converter Sludge in Panzhihua Iron & Steel Company;
攀钢转炉污泥铁粉表面包覆铜的研究
" Enamelled rectangular wires Part 2--Polyvinyl-acetal enamelled rectangular copper wires, class 120"
GB/T7095.2-1995漆包扁绕组线第2部分120级缩醛漆包铜扁铜线
copper clad
包铜的,铜包的,敷铜箔的
Copper winding wires with silk covering-General
GB/T11018.1-1989丝包铜绕组线一般规定
Research on the New Casting-Extrusion Technology to Fabricate Aluminum/Copper Clad Composite Wire
铜包铝线铸造—挤压成形新工艺研究
Experimental Study of X65 Pipeline Steel in the CSP Process of Baotou Steel
包钢CSP流程X65管线钢试验研究
The Study of the Pay-off and Take-up Control System on Aluminium Cladding Steel Wire Continous Cladding Production Line;
铝包钢丝连续包覆生产线收排线控制系统研究
To coat or finish with a layer of copper.
镀铜于给…包铜或镀铜
" Enamelled round winding wires-Part 7: Polyester enamelled round copper wires, class 130"
GB/T6109.7-1990漆包圆绕组线第七部分:130级聚酯漆包铜圆线
" Enamelled rectangular wires Part 3--Modified polyester enamelled rectangular copper wires,class 155"
GB/T7095.3-1995漆包扁绕组线第3部分155级改性聚酯漆包铜扁线
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号