delayed heat melting是什么意思

网络释义

用法例句

%) and Al-28%Mg-14%Zn alloys used for thermal energy storage applications,such as the specific heat capacity including solid and liquid state;the mass density in the temperature range 30～500℃;the melting temperature and the latent heat of fusion.

利用差示扫描量热仪(DSC)和H-90型膨胀仪,对潜热储能材料A l-34%Mg-6%Zn和A l-28%Mg-14%Zn合金的热物性参数进行了测定,如固、液态时的比热容,30~500℃间的质量密度,熔化温度和熔化潜热等。

We report the calculated results of the latent heat of fusion Δμ ls and the melting temperature T m as a function of cluster size.

给出了团簇熔化潜热和熔点随团簇尺寸的变化关系 ,表明团簇熔化潜热和熔点强烈依赖于团簇的原子数 。

Experimental instrument of measuring the melting heat of ice by electrothemal method;

电热法测定冰的熔化热实验仪的研制

The thermal properties of trans-ferulic acid such as melting point,melting heat,decomposition temperature,and so on,were studied by DSC and DTA-TGA.

采用差示扫描量热法和热重分析法对反式阿魏酸的熔点、熔化热、分解温度等性质进行了实验研究,确定了DSC-60差示扫描量热仪测定反式阿魏酸的条件,即在升温速率10℃。

According to the data of the melting heat of iron, the author corrected the solidus of FeC binary phase diagram in the rich iron end,and according to the corrected solidus e-valuated the carbon content at point H in 0.

根据铁的熔化热数据，校正了铁碳二元相图富铁端的固相线，并根据校正后的固相线，求出Ｈ点的碳含量为０。

The fusion heat and the degree of crystallinity of the various composites were got by DSC and XRD, which were related to the tribological performance.

研究结果表明,高压摩擦环境中,蠕变的发生是加速PTFE复合材料磨损、恶化材料性能的主要原因;高比表面填料的加入会提高复合材料的熔化热,有助于降低材料的磨损率;结晶度的提高对增强复合材料的耐蠕变性有明显的效果。

The effects of natural convection and moving of solid PCM on melting heat transfer are compared.

固态相变材料的运动对熔化传热过程有着重要影响 。

In order to simulate the cooling of electronic devices by solid -liquid phase change materials (PCM ) the problem on two-dimensional melting heat transfer in a rectangularenclosure with discrete heat sources on one of its vertical walls has been solved numerically.

为了探索在电子设备冷却中应用固液相变冷却的可能性，本文用数值方法求解了一侧垂直壁上有三个分散热源、其余三个面均绝热时矩形区域内的二维熔化传热问题，对固液界面形状以及加热壁面温度沿高度方向的变化规律进行了讨论。

The heat of fusion is the heat required to melt a substance at its normal melting temperature.

熔化热是一种物质在其熔点温度全部熔化所需要的热量。

Experimental instrument of measuring the melting heat of ice by electrothemal method

电热法测定冰的熔化热实验仪的研制

To melt(a solid)by heating.

熔化通过加热熔化固体

The act or procedure of liquefying or melting by the application of heat.

熔化，熔解借助热量液化或熔化的行为或过程

Capable of being fused or melted by heating.

易熔的，可熔化的通过加热能被融化或熔化的

To become liquefied from heat.

熔化加热后成为液状

A electric resistance furnace, improves the thermal efficiency of the melting process.

这种电阻式熔炉提高了熔化过程中的热效率。

But if we heat it in a furnace it will melt and become a liquid.

但如果放到熔铁炉内加热，它就会熔化成为液体。

heat fusion press

热熔转印机，热熔压烫机

The methods for determination of the melting enthalpy and melting point of higy purity stannum by using precision adiabatic calorimeter are described, and the results are given.

介绍了用精密绝热量热计测定高纯金属锡的熔化焓、熔化温度及样品熔装的方法和结果。

" Asphalt storage, melting and heating units--Terminology"

GB/T7920.15-1987沥青贮存、熔化和加热装置术语

Metals will melt when heated to a certain temperature.

金属加热到一定的温度都会熔化。

The same heat that melt the wax, will harden the clay.

热既可熔化蜡，又可使粘土变硬。

Iron will melt when it is made very hot.

当铁烧得很热时就会熔化的。

Synthesize Silicon Carbide Test Research by Multi-thermal Source and Melt;

多热源“熔透”法合成碳化硅的实验研究

The optimization method of guide post coatings formulation;

热熔性反光路标涂料配方的优化之一

Simplify Passing Error s Formula in Physical Experiment;

冰的熔解热实验误差传递公式的简化

Normal modes and melting property of (AgI)_6 cluster

(AgI)_6团簇的简正模式及其热熔化性质