Based on the theory of explosion mechanics and by means of the ANSYS/LS-DYNA software,the present paper sets a numerical analysis for the distribution law of overpressure on walls induced by an explosion in long square-section tunnel.
以爆炸力学为理论基础,利用有限元软件ANSYS/LS-DYNA,定性地研究了正方形截面长隧道内爆炸引起的内壁上超压分布规律。
The content of oxygen,carbon and metal impurities in the remelted material was analyzed so as to find out if the pot material could be used as the feedstock to produce multi-crystal silicon ingot for solar cell.
试验发现通过重熔可以将单晶硅埚底料中的石英与硅料分离,重熔后得到的硅片中氧含量比较高,而金属杂质含量基本可达到太阳电池多晶硅锭的生产要求。
This paper introduces one measuring method for the silicon ingot based on the X-ray diffraction principle,and the measuring model was set up simultaneous.
本文介绍了一种基于X射线衍射原理的半导体材料—硅单晶锭的加工测量方法,建立了硅单晶锭的测量模型。
Experimental Investigation on Secondary Flow of Air-Water Two-Phase Flow in Straight Channel with Square Cross-Section
正方形截面直通道内二次流现象的实验研究
Distribution Law of Explosion Overpressure on Walls of Long Square-Section Tunnel
正方形截面长隧道内壁爆炸超压分布规律
Orthogonal test on forming parameters of square box made of tailor rolled blanks
变截面板方盒形件成形参数的正交试验分析
The Research on the Strength of Normal Section and Inclined Section of Steel Reinforced Concrete Special-Shaped Column;
钢骨混凝土异形柱正截面与斜截面承载力研究
Normal section strength calculation for reinforced concrete flexural member with ring section
钢筋混凝土环形截面受弯构件正截面强度计算
Several Solutions of Section Design of the Single Steel Beam--On the Calculation of Bearing Capacity of the Single Steel Rectangular Beam section;
截面设计的几种解法——略谈单筋矩形截面梁正截面承载力计算
Calculation Method of Normal Section Flexural Capacity of Corroded Reinforced Concrete Rectangular Beams
锈蚀钢筋混凝土矩形梁正截面抗弯承载力计算方法
Using Alternation Approximate Method for following a Precedent to Answer Moment Capacity of Reinforced Concrete Trapezium Beams or Triangle Beams.
试用迭代法求解梯形、三角形截面梁正截面承载力
Load Carrying Capacity Research of Normal-Section of T-Shaped Haydite Conctete Columns;
陶粒砼不对称T形截面异形柱正截面承载力研究
Research on Bearing Capacity of S. R. C Inequiaxial L-Shaped Columns;
钢骨混凝土不等肢L形截面异形柱正截面承载力研究
Research on Ultimate Strength of Cross-Section of Lightweight Aggregate Reinforced Concrete L-Shaped Columns;
轻骨料混凝土L形截面异形柱正截面承载力研究
Research on Bearing Capacity of Steel Truss S.R.C Asymmetrical T-Shaped Columns;
桁架式钢骨的混凝土异形柱——不对称T形截面正截面承载力研究
The Study of Special Shaped Component Section Bearing Properties and Classification Limits;
异形截面构件的正截面承载性能及分类界限研究
The Experimental Study of T-Shaped Hayride Concrete Short Lamb Shear Wall Subjected to Biaxial Eccentric Compression;
陶粒混凝土T形截面短肢剪力墙正截面承载力研究
The Research on the Cross Section s Bearing Ability of Lightweight Aggregate Concrete Eccentric Compressed Cylinder Member;
轻骨料混凝土圆形截面偏心受压构件正截面承载力研究
Property and Load-bearing Ultimate Capacity Analysis of Special-shaped Columns under Loading;
异形截面柱的受力特性及其正截面极限承载力分析
Experimental study on normal section compression bearing capacity of composite T-shaped concrete-filled steel tubular columns
组合T形截面钢管混凝土柱正截面受压承载力试验研究
Analysis on normal section bearing performance of honeycomb steel-reinforced concrete L-shape cross section column
蜂窝状钢骨混凝土L形截面异型柱的正截面受力性能分析
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号