carbon tool steel是什么意思

网络释义

用法例句

The chromizing hardening process of carbon tool steel was studied by using double glow plasma surface chromizing process+ion-nitriding at 560℃.

采用离子氮化+双层辉光离子渗金属的复合处理渗铬新技术,对碳素工具钢进行560℃表面渗镀铬硬化研究。

The carbon tool steel was quenched into the different concentration of calcium chloride watery solution.

对碳素工具钢采用不同浓度的氯化钙水溶液进行淬火。

In order to require of the decarburized layer depth of T11A～T13A carbon tool steel wire rod up to the GB/T1298-1986 standard,the correspond heating processes for roughing soaking pit,pusher-type furnace for structural steel and rail and step-by-step furnace for wire were established based on the feature of T11A～T13A carbon tool and process technology in Pan Steel Co.

为使攀钢T11A～T13A碳素工具钢盘条的脱碳层深度满足GB/T12 98 1986标准的要求 ,根据T11A～T13A碳素工具钢的特点及攀钢的生产工艺 ,对初轧均热坑、轨梁推钢式加热炉及线材的步进式加热炉制定了相应的加热工艺 ,生产出的T11A～T13A碳素工具钢盘条的脱碳层全部满足GB/T12 98 1986标准的要求。

The results show that the slurry of high carbon tool steels prepared after stirring during solidification can make products without segregation and defect like network carbide which tend to occur during direct rolling.

探讨了高碳工具钢常规的加工方法和半固态流变轧制技术,结果表明将在凝固过程中进行搅拌后制备的高碳工具钢半固态浆料直接进行流变轧制,可生产出成分均匀、没有偏析的产品,消除了在常规轧制中很难克服的网状碳化物等缺陷;半固态固相颗粒细小而且星球状可生产出高强、高韧性的工具钢。

Medium-carbon and high-carbon steels are often used as tool steel. Tool steels include carbon tool steel, alloy tool steel and high-speed tool steel.

中碳钢和高碳钢常用作工具钢。工具钢包括碳素工具钢、合金工具钢和高速工具钢。

Carbon tool steel wires

GB/T5952-1986碳素工具钢丝

Technical requirements for hot-rolled carbon tool steel sheets and plates

GB/T3278-1982碳素工具钢热轧钢板技术条件

Carbon tool steels--Technical requirements

GB/T1298-1986碳素工具钢技术条件

Performance Analysis of Laser Cladding Carbon Tool Steel;

激光熔覆碳素工具钢(T8A)的微观形貌和显微硬度分析

Standard figure of coarse carbide of high speed tool steel

GB/T4462-1984高速工具钢大块碳化物评级图

Experiment and Analysis on Jointing of Tool Steel and Carbon Steel by Explosive Welding

工具钢-普碳钢复合板爆炸焊接试验与分析

Bending die design for thick plate of carbon structure steel

厚材料的碳素结构钢弯曲成形模具设计

Of course I know. according to the amount of the carbon content, carbon steels can be divided into low-carbon steel, medium-carbon steel and high--carbon steel.

根据碳元素的含量，碳素钢可再分为低碳钢、中碳钢和高碳钢。

A Study of the Vanadium Carbide Coating formed on Die Steels by Immersion in a Fused Borax Bath

国产模具钢盐浴碳化钒涂覆工艺的研究

The Optimum Design of the Heating Treatment Process of High-carbon and High-alioy Cold Work Die Steel;

高碳高合金冷作模具钢热处理工艺的优化设计

Research of Automatic Analysis for High Alloy Eutectic Carbide;

高合金工具钢共晶碳化物自动分析技术研究

Study on the sintering PM tool steel with high carbon chromium vanadium

烧结法制备粉末冶金高碳铬钒工具钢的研究

The abrasive tools made of it are suitable for the gringding of carbon steel, malleable cast iron, hard bronze, etc.

用其制造的磨具，适用于碳素钢、锻铸钢、锻铸铁、青铜等的磨削。

Extruding Process Development of Ferritic Stainless Steel Seamless Tube 06Cr13 with Low Carbon

低碳铁素体不锈钢06Cr13挤压无缝管工艺开发

The width in pixels that the pen draws lines.

钢笔线条宽度指钢笔工具画线条时候的像素值。

The Flow Pattern Analysis of Hot Extrusion Carbon Steel Pressure Reducing Valve Shell and Die Design

热挤压碳素钢减压器壳体流动成形分析及模具设计

The heat treatment technology of carbo- nitriding of steel has the characteristic of lower treatment temperature and direct quenching.

钢的碳氮共渗热处理工艺具有共渗温度低、直接淬火等特点。