thermosetting是什么意思

网络释义

用法例句

This article has briefly described the cholorotrifluoroethylene-vinyl ether based thermoset fluorocarbon powder coatings,and discussed the problems and reslutions to selection of curing agent and additives including curing catalyst,impact resistant improver,defoamer,and leveling agent,etc during the formulation design.

介绍了以三氟氯乙烯-乙烯基醚为基体的热固(性)氟粉末涂料的研制过程,讨论了在涂料配方设计中选择固化剂和固化反应催化剂、耐冲击剂、消泡剂、流平剂等助剂时容易出现的问题与解决方法,检测了制备的热固(性)氟粉末涂料的各项理化性能。

The performances of thermoplastic and thermoset fluoro-carbon powder coatings are reviewed and compared.

简要介绍了我国粉末涂料的发展现状、重点介绍了氟碳粉末涂料的种类和发展,概述了热塑性和热固(性)氟碳粉末涂料性能,对两类氟碳粉末涂料做了各种性能比较,简单介绍了两类氟碳粉末涂料在工业领域的应用。

The tribological performance and research situation of the thermosetting polymers and composites involving phenol formaldehyde resin,epoxy resin,polyurethane and crosslinked polyimide were reviewed.

介绍了聚合物及其复合材料特有的磨粒磨损、冲刷磨损和粘着磨损机理,并对酚醛树脂、环氧树脂、聚氨酯、交联型聚酰亚胺等几种热固(性)聚合物及其复合材料的摩擦学性能、研究现状及发展趋势进行了评述。

Use of polyisocyanate curing agent in thermosetting fluoro powder coatings;

聚异氰酸酯固化剂在热固(性)氟粉末涂料中的应用

The effects of α-hydroxy-2-naphthomethane acid on the properties of thermosetting phenolic resin modified by siloxane;

α-羟基-2-萘甲酸对热固(性)有机硅改性酚醛树脂性能的影响

Application of thermosetting fluorine resin in coil coatings deals with balance of many performances.

热固(性)氟树脂用于卷材涂料涂装涉及到多项性能的平衡调整,本文从底漆和氟碳面漆的角度探讨了这些性能的影响因素。

Effects of storage condition on rheological properties for typical thermosetting resins;

热固(性)树脂体系流变特性随贮存条件变化规律

Development of research on high-temperature resistance thermosetting resin adhesives;

耐高温热固(性)树脂胶粘剂的研究动态

In this paper,corrosion resistant evaluation of thermosetting resin,the test comparison of EN-13121-2 in European with ASTM C 581 in DSM composite resin and test proof with long-term change were described and conclusion about Atlac products in DSM were also introduced.

论述了热固(性)树脂耐化学腐蚀评估,耐化学腐蚀性能的欧洲标准(EN13121-2)与DSM复合材料树脂公司方法(ASTMC 581)的实验比较以及长期案例验证。

Thermoplastic resin modified thermoset resin is an efficient method to improve the toughening of the materials without sacrifice of glass temperatures.

热塑性树脂改性热固(性)树脂,可以在不降低热固(性)树脂耐热温度的同时,大幅度提高改性材料的韧性。

The research progress in microwave curing thermoset resins and their matrix based composites were reviewed.

综述近年来热固(性)树脂及其复合材料的微波固化最新研究进展,介绍微波热效应原理,重点讨论热固(性)树脂微波固化与加热固化的不同、热固(性)树脂微波固化工艺及颗粒增强热固(性)树脂基复合材料的微波固化。

The injection and compression technology with cold runner and mould for the thermosetting plastics;

热固(性)塑料冷流道注射压缩成型工艺及模具

Recycling Technology of Used Thermosetting Plastics;

热固(性)塑料回收利用技术

Attention was paid on how to lower the production costs in the processing of thermosetting plastics,which covered the fiber orientation,removal of burr and sprue runner material loss.

由于纤维取向、去除飞边和流道料损失等是热固(性)塑料加工中影响成本的主要问题,故着重介绍了降低上述费用的办法。