Effect of aging treatment on corrosive wear characteristics of σ strengthening austenite stainless steel;
时效处理对σ相强化奥氏体不锈钢腐蚀磨损特性的影响
Environmental embrittlement of materials in corrosive wear;
腐蚀磨损过程中材料的环境脆性
Investigation on corrosive wear property of nano-Al_2O_3 particles reinforced Ni-based alloying layer
纳米Al_2O_3颗粒增强Ni基复合镀渗合金层的腐蚀磨损性能研究
A new corrosion-wear resistant alloy for pumps used in hydrometallurgy of zinc and it's heat treatment were studied.
设计了用于湿法炼锌介质环境的新型耐腐蚀磨损合金的化学成分和热处理工艺,通过金相显微镜、电子探针、扫描电镜、腐蚀磨损试验等方法,分析了新型合金的显微组织、磨损形貌,研究了它与对比钢CD-4MCu、常用叶轮材料YL的腐蚀磨损性能。
The characteristics of corrosion-wear of 13Cr-24Mn-0.
44N不锈钢在体液润滑条件下具有良好的抗腐蚀磨损能力,单位时间的磨损量仅为水润滑条件下的25%左右,摩擦因数下降了近30%。
The microstructure,corrosion resistance in acidmedia as well as corrosion-wear behaviors under different impact velocities or in acid media with various densities were investigated for the all laser remelted alloy coatings.
研究了在45钢表面进行激光熔敷镍基合金、镍基Cr2O3合金和镍基WC合金的熔敷层的组织结构、耐蚀性及不同冲击速度和不同浓度的腐蚀介质下的腐蚀磨损特性。
Corrosion and Wear Resistance of Al Ion Implanted AZ31 Magnesium Alloys;
铝离子注入AZ31镁合金的腐蚀磨损研究
Corrosion and Wear Behavior of LY12 Aluminum Alloy in Rainwater
LY12铝合金在雨水中的腐蚀磨损
Influence of Copper on Abrasion Resistance of Wear-Resisting Casting Steel for Mines
铜对矿山用耐磨铸钢抗腐蚀磨损性能的影响
EXPERIMENTAL STUDY OF ABRASIVE-CORROSIVE WEAR OF MUD PUMP LINER
钻井泵缸套材料磨料—腐蚀磨损实验研究
Corrosion and Corrosion-wear Behavior of Modified Layers on Titanium and Its Alloy;
钛及钛合金表面改性层腐蚀及腐蚀磨损性能的研究
The failure of the hollow cylinder roller bearing is stress corrosion wearing.
空心圆柱滚子轴承为应力腐蚀磨损失效。
Research on Corrosion Wear Mechenism of Dip-Roll Sleeve in Hot-Dip Galvanizing;
热镀锌板沉没辊轴套材料腐蚀磨损机理的研究
Effect of Shot Blasting on Corrosion and Corrosive Wear Property of Magnesium and Its Alloy;
喷丸处理对镁及镁合金腐蚀磨损性能的影响
The Microstructure and Corrosive Wear Behavior of a New Kind of High-Al Bronze;
新型高铝青铜组织及腐蚀磨损行为的研究
Study of Impulsive Corrosive Wear and Tear of Two Kinds of Steel in Hot Strong Alkaline;
热强碱性条件下两种钢冲击腐蚀磨损的研究
The performance of corrosion and abrasion of high velocity oxygen fuel spray 316L stainless steel coating on mine shaft steel guide
罐道超音速喷涂316L不锈钢涂层的腐蚀磨损行为
Effect of Impact Power on Corrosive Wear of Medium Carbon Alloy Steel
不同冲击功对中碳合金钢腐蚀磨损的影响
The Influence of Impact Energy and Impact Angle on the Impact Corrosion and Abrasion Mechanisms of Steels Used in Wet-grinding Machine Lining Board;
冲击功、冲击角对湿磨衬板钢冲击腐蚀磨损机理影响
Research of the Influence of Component、Microstructure and Impact Energy on the Impact Corrosion and Abrasion Mechanisms of Steels Used in Wet-grinding Machine Lining Board;
成分、组织及冲击功对湿磨衬板用钢冲击腐蚀磨损机理影响的研究
Research Progress on Erosion-corrosion and Cavitation Erosion of Duplex Stainless Steel
双相不锈钢的磨损腐蚀与空泡腐蚀研究进展
Study on Wear and Corrosion Properties of New Type Austenitic Stainless Steel;
新型奥氏体不锈钢磨损、腐蚀性能研究
Wear and corrosion properties of 45 steel boronised using Nd_2O_3 as activator
稀土粉末渗硼45钢的磨损与腐蚀性能
The group of natural processes, including weathering, dissolution, abrasion, corrosion, and transportation, by which material is worn away from the earth's surface.
腐蚀,侵蚀指使材料从地表磨损、消耗的一组自然过程,包括风化、溶解、磨蚀、浪蚀、腐蚀和搬运
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号