On the basis of orthogonal experiment, the effect of Mg content and heat treatment on mechanical properties of near eutectic Al Si cast alloys modified with Sr has been investigated.
以正交试验为基础 ,通过调整Mg含量和热处理工艺 ,分析它们对Sr变质近共晶Al Si铸造合金力学性能的影响。
The effect of carbon content on element segregation and corrosion resistance of the cast alloy Fe 30Ni 20Cr 6Mo has been investigated.
研究了Fe-30Ni-20Cr-6Mo铸造合金中微量元素C对合金元素偏析和耐蚀性的影响。
Effect of microstructure and element distribution of an iron base cast alloy Cr30Nil7Mo2Cu solidified at different rates upon the erosion-corrosion behaviour in flowing suspension of solid particles in strong acidic medium has been investigated by metallograph, XRD, EPMA and hardness tests.
用扫描电镜、X射线衍射、电子探针等手段测定及分析了Fe基铸造合金Cr30Ni17Mo2Cu以不同速度凝固后的显微组织和主要合金元素分布,在含固相颗粒的强酸性双相流介质中测定了冲刷腐蚀性能。
Development of alloy cast iron standard materials for spectral analysis;
合金铸铁光谱分析用标准物质的研制
The Cu-Ni alloy cast irons of different chemical constitution were designed,and the corrosion rate in room-temperature concentrated alkaline solution was measured by the static hydrometer method,the microscopics and phase composition of alloy cast iron were observed by optical microscope and XRD.
设计了不同成分的铜镍合金铸铁,并用静态失重法测定其在室温浓碱液中的腐蚀速率,借助光学显微镜和X射线衍射仪分析了显微组织和相组成。
The corrosion rates of Cu-Ni alloy cast irons in hot concentrated alkaline solution were measured by dynamic condition hydrometer method,the microscopic structures and surface corrosion topographies of alloy cast irons were observed by the optical microscope and SEM,the components were analyzed by XES.
采用动态失重法测定铜镍合金铸铁在高温浓碱液中的腐蚀速度,借助光学显微镜和扫描电镜观察显微组织和表面腐蚀形貌,利用能谱仪分析表面微区成分。
Principles of Cast Alloy & Melting
铸造合金原理及熔炼
Casting defects analyzing and prevention of aluminum alloy cast by traveling magnetic field
铝合金铸件移动磁场铸造的铸造缺陷及防止
Zinc alloy ingots for casting
GB/T8738-1988铸造锌合金锭
Aluminium alloy ingots for casting
GB/T8733-1988铸造铝合金锭
t-chromium alloy for high frequency casting
高频铸造用钴铬合金
loy for dental casting
牙科铸造用钴铬合金
cast copper alloy for propeller
螺旋桨用铸造铜合金
Bearing alloy ingots for casting
GB/T8740-1988铸造轴承合金锭
Aluminium-silicon alloy ingots for casting
GB/T8734-1988铸造铝硅合金锭
cast Alnico hard magnetic alloys
铸造铝镍钴硬磁合金
The Effect of Cupola Coke on Improving Quality of Alloy Iron Casting
铸造焦对提高合金铸铁件质量的作用
CAD System for Cylindric Magnesium Alloy Casting by Low Pressure Casting Process;
圆筒型镁合金铸件低压铸造工艺CAD
Improvement on Casting Process for Frame Casting of Magnesium Alloys
某型框架体镁合金铸件铸造工艺改进
Improvement of Strength and Toughness of Casting Aluminium Alloy ZL107 with Minim Alloy Element;
ZL107铸造铝合金的微量合金强韧化
Simulation of Casting Stress of Low-pressure Casting Aluminum Alloy Wheel
低压铸造铝合金轮毂铸造应力的数值模拟
Solidification Behavior and As-cast Microstructure of Permanent Mould Casting Mg-10Zn-2Al alloy
金属型铸造Mg-10Zn-2Al合金的凝固行为及铸态组织
Objective To compare the effects of the gold alloy casting crown with Ni-Cr alloy crown on MR images.
目的 比较金合金铸造冠与镍铬合金铸造冠在磁共振成像时的差异。
Research on Aluminum Alloy and High Chromium Cast Iron Prepared by Solid-Liquid Mixed Casting Process
固液混合铸造铝合金和高铬铸铁的研究
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号