New Casting Technique是什么意思

网络释义

用法例句

Application of CAE to Design of Casting Process for Piston;

CAE技术在活塞铸造工艺设计中的应用

Improving on casting process with computer simulatoin of ZG1Cr18Ni9 valve body;

利用计算机模拟对ZG1Cr18Ni9阀体铸造工艺的攻关

The Production and Casting Process of Nodular Iron Casting Body;

球墨铸铁件机体铸造工艺研究与生产实践

Design and Realization of a Casting Technology CAD System by Further Development on Pro/E;

基于Pro/E的三维铸造工艺CAD系统的设计与实现

Casting technology of cylinder sleeves for large marine diesel engines;

大型船用柴油机缸套的铸造工艺

Casting Technology for Screwy Sheath of Double Screw Roller Grinded-paste Machine;

双螺旋辊式磨浆机螺旋套铸造工艺的研究

The Optimal Casting Technique Design of Water Turbine Runners;

转轮体铸造工艺的优化设计

Therefore computer aided design for structure and casting technique of supporting trunnion roller is realized.

针对传统回转窑托轮铸造工艺复杂、受力易产生轮辐开裂等状况,应用ABAQUS对其应力分布进行了分析,改进了托轮的结构。

Through the improvement on casting process, the horizontal tilting metal mould casting technique has been adopted to produce Al alloy pressure-tight shells.

从铸造工艺、工装设计上进行改进创新,采用横向翻转浇注工艺铸造耐压外壳铸件。

An introduction was made to the foundry method of CY4D series diesel engine cylinder block and head,as well as the quality problems met during the trial production and their prevention measures including: leakage of cylinder head; dimensional deviation of block after machining and cylinder cores cracking.

介绍CY4D系列柴油机缸体的铸造工艺特点,试制过程中出现的包括缸盖渗漏、缸体加工尺寸偏差和缸体缸孔穿芯等质量问题,以及相应的解决措施。

The foundry method design of a nodular iron reductor housing with ferrite matrix was de-scribed.

介绍了铁素体基体球铁减速器壳体的铸造工艺设计。

The foundry method scheme, gating system design, melting and treatment of the molten iron was described.

对铸件的工艺难点进行了分析,介绍铸造工艺方案,浇注系统设计,和铁 液熔炼、处理工艺。

The design for foundry technology about QC4110 diesel engine bent-axis;

QC4110柴油机曲轴铸造工艺的设计

Study on a CAD/CAE System for Foundry Technology under Concurrent Engineering Environment;

并行工程环境下的铸造工艺CAD/CAE系统

Research and Development of Computer Aided Software for Foundry Technology Design

计算机辅助铸造工艺设计软件研制

A new casting technology for inlet manifold in tilt casting machine for gravity die casting was described.

介绍了在可倾式金属型浇注机上制造进气歧管的铸造新工艺。

Research on the New Casting-Extrusion Technology to Fabricate Aluminum/Copper Clad Composite Wire

铜包铝线铸造—挤压成形新工艺研究

One Special Casting Method in Jewelry Making,Cuttlefish Casting

一种特别的首饰铸造工艺——墨鱼骨铸造

Study on the Cluster of LFC in Cast Iron&Cast Steel for Small to Medium Casting Process;

铸铁铸钢中小件消失模铸造串铸工艺研究

Analiying current bimetal casting process, we presented the new process of two liquids casting.

通过对双液双金属铸造生产工艺分析,提出了双液双金属复合铸造耐磨零件制造新工艺。

The Casting Technology of 1400s18 Pump Impeller;

1400s18大泵叶轮的铸造工艺

Study on Heat Treatment Process of New-type High-strength Cast Aluminum Alloy

新型高强度铸造铝合金的热处理工艺研究

CAD System for Cylindric Magnesium Alloy Casting by Low Pressure Casting Process;

圆筒型镁合金铸件低压铸造工艺CAD

The Experimentation Study of the Low-pressure Foundry Techniques of the Hull Castings;

壳体类铸件的低压铸造工艺试验研究

Cast Technology of Cast-steel Shell Based on ProCAST

基于ProCAST的铸钢件壳体铸造工艺研究

Casting method and Equipment Used for Resin Sand-Coated Permanent Mould Cast Wheel Hub Castings

轮毂类铸件覆砂铁型铸造工艺及设备

Improvement on Casting Process for Frame Casting of Magnesium Alloys

某型框架体镁合金铸件铸造工艺改进

Casting Process Improvement of Several Typical Castings with Casting Simulation Software

铸造模拟对几种典型铸件的工艺改进

Research on Cast Technology of the Self-made Investment for Titanium and on Accuracy of the Dental Titanium Castings

自制铸钛包埋材料铸造工艺与铸钛修复体铸造精度的研究

Development of CAD System on Camshaft Mold and Foundry Tools Design;

凸轮轴铸件铸造工艺工装CAD系统的开发

Casting Production Process of a Ductile Iron Coupler Used for Heavy Trailer

重型拖车球铁连接器铸造工艺重型拖车球铁连接器铸造工艺

Study of the Process and Mechanism on a New CO_2-Cured Phenol-Formaldehyde Resin with Cold-Core Box Material Used in Foundry;

铸造用新型CO_2硬化酚醛树脂冷芯盒材料工艺及机理的研究

Effects of Ageing Treatment Technology on the Microstructure of a New High Strength Cast Aluminum Alloy Structure and Mechanical Properties

时效工艺对新型高强度铸造铝合金组织和力学性能的影响