The effects of solution heat treatment processes on the microstructure and mechanical properties of the spray deposited 7090/SiC_P composite were investigated.
研究了固溶处理工艺对喷射沉积7090/SiC_p铝基复合材料的显微组织和力学性能的影响。
It is thereby shown that the spinning and bulging forming can be done successfully, when taking four paths stepped spinning process, non-completed solution heat treatment (460℃±10℃ 30 min quenching by water) before spinning and completed solution heat treatment (515℃±10℃ 15 min quenching by water) before bulging for 6061.
结果表明,以6061铝合金为材质,采取4道次错距强旋成形工艺以及旋压前进行不完全固溶处理[(460±10)℃ 30 min、水淬]、胀形前进行完全固溶处理[(515±10)℃15 min、水淬],可确保旋压及胀形过程顺利进行,壳体的凹槽形状、尺寸精度、力学性能以及表面质量均可得到有效的保证。
To dissolve the intermetallics which precipitated from the matrix of the layer, a solution heat treatment is conducted.
采用双层辉光离子渗金属技术 ,首先在低碳钢表面渗入合金元素钨、钼 ;然后作固溶处理 ,使金属间化合物溶于基体中 ;接着渗碳 ,使合金层内形成大量弥散、均匀、细小的合金碳化物。
Effect of solution treatment on the microstructure and properties of 0Cr17Mn11Mo3N steel prepared by metal powder injection molding;
固溶处理对注射成形0Cr17Mn11Mo3N钢组织性能的影响
Effects of solution treatment on the microstructures and mechanical properties of Al-1.5Si-1.2Mg-0.6Cu-0.3Mn aluminum alloy sheets;
固溶处理对Al-1.5Si-1.2Mg-0.6Cu-0.3Mn铝合金组织性能的影响
Effect of solution treatment on microstructure and properties of 7B04 aluminum alloy;
固溶处理对7B04铝合金组织和性能的影响
Effect of solid solution treatment on microstructure and properties of MIM Cr17Mn11Mo3N stainless steel;
固溶处理对注射成型Cr17Mn11Mo3N不锈钢组织性能的影响
Effects of Y addition and solid solution treatment on microstructure and mechanical properties of AM60 magnesium alloys;
稀土Y及固溶处理对AM60镁合金组织和力学性能的影响
Effect of the cooling rate during solid solution treatment on the properties of 1420 alloy;
固溶处理冷却速度对1420合金性能的影响
Morphology Transformation of Eutectic Silicon in Al-Si Alloy during Solid Solution Treatment;
铝硅合金中共晶硅在固溶处理时的形态转变
Effect of Solid Solution and Aging on Structure and Properties of 17-4PH Precipitation-Hardening Stainless Steel;
固溶处理和时效对17-4PH沉淀硬化不锈钢组织性能的影响
Effect of Cu Content on the Behavior of Solid Solution Treated Al-Mg-Si Alloy;
Cu含量对Al-Mg-Si合金固溶处理行为的影响
Influence of solid-solution treatment on mechanical properties of nickel-chromium-molybdenum alloy and analysis of its fracture;
固溶处理对镍铬钼合金力学性能的影响及断口分析
Effects of solid-solution treatments on the microstructure and mechanical properties of AM60B+xRE and AZ9lD+xRE magnesium alloy;
固溶处理对AM60B+xRE及AZ91D+xRE镁合金性能的影响
Influences of solid-solution treatment on mechanical properties of Ni-Cr-Mo alloy and analysis of its fracture;
固溶处理对镍-铬-钼合金力学性能的影响及断口分析
Probe into solution treatment on AlSi7MgBe aluminum alloy
AlSi7MgBe铝合金的固溶处理探讨
Effect of solution heat treatment on mircoarc oxidation coatings of AZ91D magnesium alloy
固溶处理对AZ91D镁合金微弧氧化的影响
The Technical Study of 2205 Duplex Stainless Steel Solid Solution Treatment
2205双相不锈钢固溶处理工艺研究
Study on Solution Treatment Process for Mg-6Al-0.5Y-1.0Ce Alloy
Mg-6Al-0.5Y-1.0Ce合金固溶处理工艺的研究
Effect of solid solution treatment on mechanical properties and microstructures of extruded WE43 magnesium alloy
固溶处理对挤压WE43镁合金的影响
Study on Strengthening Solution Treatment for 7050 High Strength Aluminum Alloy
7050高强铝合金强化固溶处理研究
Effects of Solution Treatment on Microstructure and Mechanical Properties of ZW21 Magnesium Alloy
固溶处理对ZW21镁合金组织和性能的影响
Effect of solution treatment temperature on microstructure and properties of 7××× aluminium alloy after two-stage aging
超高强铝合金的固溶处理及双级时效研究
The Influence of Different Solution Heat Treatment Processes on Microstructures and Mechanical Properties of 2Al6 Aluminum Alloy
固溶处理对2Al6铝合金显微组织和性能的影响
Effects of solid solution treatment on pitting corrosion behavior of 2205 duplex stainless steel
固溶处理对2205双相不锈钢点蚀性能的影响
Effect of solution treatment on quenched depth of 7050-T6 aluminum alloy
固溶处理对铝合金7050-T6淬透层深度的影响
Effects of Progressive Solution Treatment on Microstructure and Mechanical Properties of 7055 Aluminum Alloy
多级固溶处理对7055铝合金组织和性能的影响
Solution Treatment of the Part of Austenitic Stainless Steel U-pipe
奥氏体不锈钢U形换热管局部固溶处理
Effects of Solid Solution Treatment Temperature on the Phase and Microstructure of 0Cr12Mn5Ni4Mo3Al Steel
固溶处理温度对0Cr12Mn5Ni4Mo3Al钢的相和组织的影响
EFFECT OF SOLUTION TREATMENT ON ELECTROCHEMICAL PERFORMANCE OF Al-Zn-In-Mg-Ti-Mn ALLOYS
固溶处理对Al-Zn-In-Mg-Ti-Mn合金电化学性能的影响
Effects of Solution Treatment on Microstructure and Mechanical Properties of Differential Pressure Casting GW103K Alloy
固溶处理对差压铸造GW103K合金组织和性能的影响
Effect of Solution Treatment on Microstructure and Mechanical Property of Inconel 690
固溶处理对Inconel 690合金组织和力学性能的影响
Effect of Solution Treatment Temperature on Microstructures and Damping Properties of Cu-17Al-10Mn Alloy
固溶处理对Cu-17Al-10Mn合金组织和阻尼性能的影响
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号