Comparison of polyolyfine elastomer vulcanizates reinforced by carbon black and silica;
炭黑与白炭黑增强聚烯烃弹性体硫化胶的比较
Study on properties of starch/carbon black/SBR composite;
淀粉/炭黑/SBR复合材料的性能研究
Influence factors of particle breakage of carbon black and control of conveying airflow;
影响炭黑粒子破碎率的因素及输送气量控制
Simultaneous catalytic removal of soot and NO_x over Nd_2O_3-based complex catalysts;
Nd_2O_3基复合氧化物上炭黑和NO_x的同时催化去除特性
Absorption reactivity of soot with nitric oxide;
炭黑对一氧化氮的吸附反应性
Characterization of V_mTi and K_nV_(0.04)Ti Catalysts Supported by Oxide and Their Catalytic Performances for Diesel Soot Combustion;
V_mTi和K_nV_(0.04)Ti担载氧化物催化剂的表征与催化燃烧柴油炭黑的性能
Preparation of Cellular Polycarbonate/Carbon Compound Material;
多孔导电聚碳酸酯/炭黑复合材料的制备
Study of Thermal Diffusivities of Rubber filled by N115 Carbon;
关于填充N115炭黑胎面胶热扩散系数的研究
Study about influence on dynamic mechanical property of vulcanized rubber caused by carbon with orthogonal design;
正交试验法研究炭黑对硫化胶动态性能的影响
Research on the conductivity of different CB Filled PVC/EPDM NTC composites;
不同炭黑填充的PVC/EPDM复合NTC材料电性能的研究
Electrical Properties of PVC/CB Conductive Foam;
聚氯乙烯/炭黑复合型泡沫导电高分子材料的电性能
Designing and Calculation Method of the Penumatic Conveying Device of CB;
炭黑气力输送装置的设计与计算
The black carbon was modified by styrene in the presence of initiator benzoyl peroxide.
在引发剂过氧化苯甲酰存在下,用苯乙烯对普通炭黑进行了有机表面改性,考察了改性后炭黑在有机溶剂中的分散性,再以该改性的炭黑为填充剂,制备聚氨酯密封胶,考察该种改性方法所得到的炭黑对密封胶性能的影响。
Then,the modified NR was mixed with high-abrasion black carbon(HAF) to prepare NR/HAF composite with excellent properties.
分别以过氧化二苯甲酰(BPO)和过氧化二异丙苯(DCP)为引发剂,在双辊开炼机上采用马来酸酐(MAH)单体对天然橡胶(NR)进行接枝改性,再与高耐磨炭黑(HAF)混合,制备出了性能优良的炭黑增强天然橡胶复合材料,并对其性能进行了测试和分析。
Jamming of the black carbon used in the rubber factory is a common and difficult problem, which will not only cause the production process break off and enormous profit loss, but also cause severe environmental pollution.
橡胶厂所用的炭黑在气力输送中的堵塞是一个普遍而又棘手的问题 ,它不仅会使生产中断 ,造成很大的经济损失 ,而且还严重污染环境。
Graft Polymerization of Acrylamide onto Carbonblack Surface Using Acetylacetonate Copper(Ⅱ) Complex;
乙酰丙酮铜(Ⅱ)引发的炭黑表面接枝聚合研究
Many theoretic model about the mechanism of the PTC properties of polymer/carbonblack composites are suggested.
关于聚合物/炭黑复合材料PTC特性的机理研究,提出了许多理论模型。
The influence of matrix on the properties of polyethylene/carbonblack composite is researched in this paper.
研究了基料对聚乙烯/炭黑复合材料PTC特性的影响。
Carbon black for use in rubber industry
GB3778-1994橡胶用炭黑
Standard terminology relating to carbonblack
GB/T7767-1994炭黑术语
carbon black gel complex
炭黑凝胶(复合体)
test method for carbon black in polyethylene
聚乙烯炭黑含量测定法
Carbon black--Inspection of impurity material
GB/T3780.12-1995炭黑杂质的检查
Carbon black-Determination of ash content
GB/T3780.10-1992炭黑灰分的测定
Standard reference black
GB/T9578-1988标准参比炭黑
active anthracene black
活性蒽炭黑(补强剂)
The structure properties and application of high structure carbon black, inversion carbon black, nano structure carbon black and silica white in the tyre industry were reviewed with11 references.
介绍了高结构炭黑、化炭黑、纳米结构炭黑和白炭黑的结构特征及其在轮胎工业中的应用。
Carbon black--Determination of pH value
GB/T3780.7-1996炭黑ph值的测定
Study on Preparing Silica Aerogel and Nano-silica from Rice Husk;
稻壳制备白炭黑及纳米级白炭黑的研究
Structures and anti-static properties of silica/carbon black/SBR composites
白炭黑/炭黑/SBR复合材料的结构和抗静电性研究
Effect of CB/silica incorporation sequence on NR/SSBR blend properties
炭黑、白炭黑加入顺序对NR/SSBR胶料性能的影响
Colour black--Determination of blackness
GB/T7048-1993色素炭黑黑度的测定
A dark grayish brown to black or dark purplish gray.
炭黑深灰棕色至灰黑色或深紫灰色
Study on the Process of White Carbon Black and Activated Carbon with Rice Husk Ash
稻壳灰生产白炭黑、活性炭工艺参数的研究
Standard method for carbon black-Improving test reproducibility using ASTM reference blacks
GB/T10723-1989用ASTM标准参比炭黑改善炭黑试验再现性的标准方法
Study on Carbon Black Oxidized by Plasma Grafting Antitumour Etoposide (VP-16);
等离子氧化炭黑以及氧化炭黑接枝抗癌药物依托泊苷的研究
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号