This text introduced the sintering technology of small diameter saw blade by way of controlling the temperature and the pressure during the sintering, which means the heating up time is 3min,and the heat preservation time is 5min,initial pressure is 5MPa,and the end up pressure is 12MPa.
为了提高小锯片的生产效率、产品合格率和产品质量,本文把热压工艺应用于烧结小锯片的生产,通过对烧结过程中的温度与压力的控制,即升温时间3min,保温时间5min;初压设定在5MPa,终点压力设定在12MPa。
Transportation Management and Feeding of Pristis microdon;
小齿锯鳐的运输及人工饲养技术
Research on small diameter diamond saw-blade for dry-cutting granite
干切花岗岩的金刚石小锯片试验研究
Design of temperature control system for small diameter saw blade sintering furnace based on S7-200 PLC
基于S7-200 PLC的小锯片连续烧结炉温度控制系统的设计
A usually power-driven saw with a narrow vertical blade, used to cut sharp curves.
坚锯一种具有垂直的窄小刀片的电锯,用于切割较尖的弯曲
single-blade stroke circular
单锯片往复式圆锯机
multi-blade stroke circular
多锯片往复式圆锯机
a handsaw with a taut thin blade; used for cutting small curves in wood.
有拉紧的细刃片的手锯;用来在木头上切小曲线。
a blunt knife, razor-blade, saw, pencil, etc
钝的小刀、 不锋利的刀片、 不快的锯、 秃的铅笔等.
top plate cutting angle
顶片切削角 -锯链
Woodworking machines-Single blade stroke circular sawing machines-Accuracy tests
GB/T10960-1989锯片往复木工锯板机精度
The Study of Lateral Vibration of the Lamped Circular Saw in Cutting;
锯切时夹盘圆锯片横向振动特性研究
Finite Element Mode Analysis of Saw Blade of Hot Sawmill Based on ANSYS
基于ANSYS的热锯机锯片有限元模态分析
And how would it be possible to check whether the jigsaw pieces had been assembled correctly?
怎么可能检测这些锯齿样的小片段已经被正确连接了呢?
automatic grinder for carbide saw blade
硬质合金锯片自动磨床
Circular saw blades for woodworking
GB/T13573-1992木工圆锯片
carbide-tipped circular sawblade for wood working
木工硬质合金圆锯片
double end circular saw flanks grinding
双头圆锯片侧磨齿机
A steel saw blade is 0.7mm thick.
一条钢带锯片为0.7mm厚。
Step down the pedal switch(5),the corner can be cut then.
踩下脚踏开关(5)即可切角.锯片均速上升,锯截工件,松开锯片下降.
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号