Development of Research on Friction and Wear of High Performance and high Temperature Polymer Composites;
高性能耐高温聚合物复合材料的摩擦磨损性能研究
Effect of friction on deforming condition during tube expanding process;
管材扩径时摩擦对变形状态的影响
Determination of friction coefficient based on finite element analysis;
基于有限元分析的摩擦系数测定
Tribology and Wear of MoS_2/Ti Composite Films;
MoS_2/Ti复合膜的摩擦磨损研究
Tribology is the key factor that causes micro-components disabled in micro-electro mechanical system.
微机电中的摩擦是造成微构件失效损坏的关键因素,指出微机电中的摩擦属于原子分子尺度上的力学行为,具有不同于宏观摩擦的新特性。
Compensating For the Super-Long Precision Rubbing Rollor’s Flexure
超长精密摩擦滚子的变形补偿
In this paper, using infrared dichroism, the researchers quantitatively analyzed the LC scalar order parameters on the surface of an alignment layer after rubbing treatment.
液晶分子的取向排列通常需取向膜诱导引发,但实验发现强摩擦处理的取向膜表面的液晶分子有序度远低于液晶体内部的有序度,大约为体内部的1/2。
With reference to the special features of Alstom type 330MW sets, the paper analyses the factors that causes high bearing temperature, the development of excessive vibration as well as ways of dealing with the rubbing between stationary and rotating parts.
该文结合ALSTOM类型机组特点,重点对蒙达公司1号机的轴承温度高和振动的发展过程,以及以后发生的动静部位摩擦的处理进行了分析,为同类型机组类似问题的分析和处理提供了一定的经验。
Ball-on-disc T11 wear equipment and high temperature THT07-135 wear equipment were used to assess the slide wear factors of high velocity arc sprayed (HVAS) Fe-Al/Cr_3C_2 coating; SEM,TEM and X-ray methods were used to analysis the morphology and elements of wear scars, and the structure and phases of crossed sections.
使用球-盘接触式T11磨损试验机以及THT07-135高温磨损实验机对高速电弧喷涂Fe-Al/Cr3C2复合涂层进行了滑动摩擦影响因素的研究,并用SEM、TEM、X-Ray等手段观察分析了磨痕的形貌和成分、涂层截面的组织和相结构。
Scanning Electron Microscope (SEM) analysis showed that water restrained the ability of polymers to form transfer film on steel counterface, the friction and wear were gove.
研究了PA66/PPS共混物在水润滑条件下的摩擦磨损性能。
The research on tribology of steel(ferrous)-matrix composites reinforced by particles was reviewed in this paper, including tribological characteristics and properties of composite, the discussion of wear mechanism and the factors effecting wear resistance.
对颗粒增强钢基复合材料的摩擦学研究进行了评述 ,包括复合材料的摩擦学特征与性能研究 ,探讨了摩擦磨损机理以及影响耐磨性的各种因素 ,并在此基础上展望了其作为耐磨材料的未来发展前景。
"There are three classes offriction: dry, greasy, and viscous. "
有三种摩擦状态:干摩擦、滑动摩擦和粘性摩擦。
pertaining to or worked or produced by friction.
关于摩擦或摩擦力,由摩擦或摩擦力产生。
To warm by rubbing, as with the hands.
摩擦生热摩擦以生热,尤指用手摩擦
To become worn or sore from rubbing.
擦伤,擦疼因摩擦而磨损或擦疼
Evaluation of Friction Performance and Friction Mechanism of Semi-Metallic Friction Materials;
半金属摩擦材料摩擦性能评价和摩擦机理研究
Effect of Friction Speed on Friction and Wear Performance of Cu-matrix Friction Materials
摩擦速度对铜基摩擦材料摩擦磨损性能影响
To make smooth or glossy by or as if by rubbing; polish.
擦亮通过摩擦或像通过摩擦使光滑或发亮;擦亮
internal friction angle
(土壤) 内摩擦角
driven friction ring
被动[从动]摩擦圈
It is right proceedings that rub to charge when comb rub hair, car run on road or shoes move on carpet.
梳子摩擦头发,汽车摩擦道路或鞋摩擦地毯,就是摩擦起电的过程。
ultimate friction capacity [ground]
极限摩擦力〔土地〕
To wear away or irritate by rubbing.
摩擦通过摩擦来磨薄或剌激
Producing sparks by friction.
摩擦起火的通过摩擦产生火花的
friction geared winch
摩擦传动绞车摩擦传动起货机
friction cpupling
摩擦式联轴器摩擦式离合器
To rub with a tool that serves especially to smooth or polish.
磨光用专用于摩擦或抛光的工具摩擦
The forces due to friction are called frictional forces.
由于摩擦而产生的力称之为摩擦力。
European Institute of Tribology
欧洲摩擦学研究所(摩擦所)
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号