This method can obtain the optimum coagulant,shoot the optimum adding amount,design the best flocculates time through jar test,and utilize orthogonal experiment to seek the best energy consumption allocative decision at different levels.
提出了混凝工艺设计的优化方法,通过烧杯试验得到最优混凝剂和最佳投加量以及最佳设计絮凝时间,并利用正交试验寻求多因素不同水平组合下的最佳能耗分配方案。
This text has proposed the optimization method to coagulation G and T design;receives the optimum coagulant and shoots the adding amount and optimum design and flocculation time bestly through the jar test;and utilize and hand in the test and seek to make the best G and T decision under the multifactor different levels.
通过烧杯试验得到最优混凝剂和最佳投加量以及最佳设计絮凝时间,并利用正交试验寻求多因素不同水平组合下的最佳G和T分配方案。
The coagulation-flocculation jar test and a serious coagulants, such as the family of aluminum, iron and organic macromolecule were adopted in this test to examine the effects of removing impurity, including turbid, CODcr, and surfactants.
以洗浴废水为处理对象,针对其浊度高、有机物含量低、适于混凝处理的特点,通过杯罐试验考察了铝盐、铁盐及有机高分子混凝剂对浊度、CODcr、亚甲兰活性物质的去除效果。
Comparisons between the said model test and the beaker test using mechanical agitation were made and the test results were analyzed to find the advantages and disadvantages of each of the two types of agitation methods.
针对压缩空气搅拌混凝工艺在污水处理上的广泛应用,用模型试验来确定压缩空气搅拌反应的最优条件;通过该模型试验与机械搅拌下的烧杯试验进行比较,对试验结果进行分析得出两类搅拌方式的优缺点。
By means of static beaker test and dynamic simulation test, the effects of Al 2(SO 4) 3, PAC, PHS and HPAM of treating simulated wastewater are evaluated.
对硫酸铝、聚合铝 (PAC)、聚合铁 (PFS)和部分水解聚丙烯酰胺 (HPAM)等 4种混凝剂处理模拟污水的效果分别进行了静态烧杯试验和动态模拟试验评价 。
Through a large number of beaker tests,we have compared their purifying effects and economic worth,and bioflocculation is better.
通过大量的烧杯试验,对各种混凝剂的净水效果及经济价值进行比较,同时,也对混凝沉淀后滤后水做了一些研究。
Circular jar test was carried out by applying orthogonal test approach to obtain the optimal and sub-optimal conditions and the coagulation effect was compared under the two conditions.
杯罐试验是水厂合理确定混凝剂投加量的重要方法。
Cleveland open-cup tester
克利夫兰开杯试验器
Method for deep drawing cups testing of non-ferrous metals
GB/T5125-1985有色金属冲杯试验方法
The application of WinCC to the Sinter Pot Test Supervisory System
WinCC在烧结杯试验监控系统中的应用
The injection quantity of reagent was about 1.5~1.6time than the beaker test.
动态实际系统流程的投药量大约为烧杯试验的1.5~1.6倍。
Amsler cupping test
阿姆斯勒杯形拉延试验
Tag open cup test method
泰格开杯闪点试验法
We all drank to his success in the experiment.
我们大伙都举杯祝他试验成功。
Metals--Cupping testing method (thickness 0.2~2mm)
GB/T4156-1984金属杯突试验方法(厚度0.2~2mm)
coagulation-flocculation jar test of water
水的混凝、絮凝杯罐试验方法
Paints and varnishes--Cupping test
GB/T9753-1988色漆和清漆杯突试验
the subject has to drink a cup of tea, made with leaves, not tea bags,
受试验者要喝一杯茶,用茶叶而不是茶袋沏,
The Design of a Uprated Faradaycup in Beijing Test Beam;
北京试验束装置上大功率法拉第杯设计制造
Erichsen test and numerical simulation of AZ31 magnesium alloy sheets at various temperatures
AZ31镁合金板材高温杯突试验及其数值模拟
Numerical simulation and experimental analysis on technological parameters in warm extrusion of cup-shaped parts
杯形件温挤成形工艺参数的模拟与试验分析
Experimental research on spin-forming of cup-shaped thin-walled trapezoidal inner-gear
杯形薄壁梯形内齿旋压成形工艺的试验研究
In order to make sure, I think you should have a three-glass urine test made as well as an examination of the prostatic secretion.
为了明确诊断,你要作一次“三杯尿”试验,同时做前列腺液检查。
Test method for water vapor transmission of plastic film and sheet--Cup method
GB/T1037-1988塑料薄膜和片材透水蒸气性试验方法杯式法
Coatings and related products--Flash/no flash test--Closed cup equilibrium method
GB/T9752-1988涂料及有关产品闪/不闪试验闭口杯平衡法
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号