spray pattern是什么意思

网络释义

用法例句

Deposition behavior and movement parameters optimization for reciprocating spray forming tubular;

往复式喷射成形管坯沉积特性及运动参数优化

Research prosress in technique and theory of spray forming technology;

喷射成形工艺与理论研究进展

Morphology and Microstructure of Sprayed Powder by Spray Forming;

喷射成形过喷粉末形貌及组织研究

Microstructure and mechanical properties of 7055 Al alloys by spray forming;

喷射成形7055铝合金的显微组织和力学性能

The ultra-high strength aluminum alloys with high Zn content were prepared by spray forming technology, and the microstructure and properties of alloys were studied.

采用喷射成形技术制备了不同Zn含量的7×××系超高强铝合金,研究了Zn含量对材料的显微组织及室温力学性能的影响。

Ultra high strength Al Zn Mg Cu alloys were produced by spray forming technology, and the process parameters were optimized.

采用喷射成形技术制备了Al Zn Mg Cu系高强高韧铝合金 ,对喷射成形工艺参数进行了优化 ,对沉积坯件的热挤压工艺、热处理工艺进行了探索 ,对材料的组织进行了分析并对不同状态的材料性能进行了比较。

Ultra-high strength aluminum alloys were produced by spray forming technology.

本文利用喷射成形技术制备了超高强铝合金沉积锭,通过等温压缩实验,对超高强铝合金材料温成形特性进行了系统研究,着重分析了变形速率、变形温度和变形量对材料变形抗力的影响,塑性变形抗力随着变形温度的升高而降低,同时随着应变速率的降低而降低。

Experimental AlSixLa alloys were manufactured through conventional casting and spray deposition processing routines and their damping behaviors were studied using DMTA instrument.

Al 17Si xLa合金通过常规的铸造和喷射成形工艺制备,并采用动态热机械分析仪(DMTA)对其阻尼行为进行研究。

AlSixLa alloys were manufactured through conventional casting and spray deposition processing routines and their damping behaviors were studied using DMTA instrument.

Al Si合金通过常规的铸造和喷射成形工艺制备,并采用动态热机械分析仪(DMTA)对其阻尼行为进行研究。

With spray deposition technology hyper-eutectic Al-Si alloy has been produced.

用喷射成形技术制备了过共晶Ａｌ－Ｓｉ合金沉积坯，对原始态、沉积态和挤压态的微观组织进行了观察和分析，讨论了淬火温度对沉积态组织的影响，探索了喷射成形合金后续致密化的工艺及合适的工艺参数。

The Simulation of Heat Transfer of the Rod-billet during Two-nozzle Spray Forming Process

双喷嘴喷射成形柱状坯传热过程模拟

CHARACTERIZATION OF SPRAY FORMED T15 HIGH SPEED STEEL POWDER

喷射成形高速钢T15喷余粉末的研究

Modeling of Shape Evolution of Rod Billet in Twin-nozzle Spray Forming

双喷嘴喷射成形柱状坯生长过程模拟

Wear-Friction Properties and Microstructure of Zn52Al40Cu2Si6 Alloy Prepared by Spray Deposition

喷射成形Zn52Al40Cu2Si6微观形貌及耐磨性能

Contrast between GCr15 steel sprayed blank and sprayed powder

喷射成形沉积坯与过喷粉末的比较分析

Study on Microstructure and Mechanical Properties of 7055 Aluminum Alloys by Spray Forming;

喷射成形7055铝合金组织和性能的研究

Study on the Shape Evolution and Heat Transfer of the Rodbillet during Spray Forming Process;

喷射成形柱状坯生长及传热过程研究

Fabrication and Properties of Spray Forming High Mn ZA35 Alloy;

喷射成形高锰ZA35合金的制备和性能

Investigation on Microstructure and soundness of GCr15 Steel

喷射成形GCr15钢组织及致密化分析

Overview on Densification Process of Spray-formed Porous Materials

喷射成形多孔材料的致密化工艺综述

Microstructure and Properties of Spray-Formed 70Si30Al Alloy

喷射成形70Si30Al合金的显微组织与性能

Development and Application of Spray Forming Technology at Home and Abroad

喷射成形技术国内外发展与应用概况

Microstructure evolution of spray-formed Mg-9Al-xZn alloys

喷射成形Mg-9Al-xZn合金的微观组织演变

Effects of Squeezing Ratio on Sprayed Forming High Mn-containing ZA35 Alloy

挤压比对喷射成形高锰ZA35合金的影响

Aging Characteristics of Spray Formed ZA35-3.5Mn Alloy

喷射成形ZA35-3.5Mn合金的时效特性

Hot Deformation Behaviors and Ageing Characteristics of Spray Formed GH742y Alloy;

喷射成形GH742y合金热变形行为及时效特性

The Study on Microstructure of a Hard-deformed Spray Formed Superalloy

一种喷射成形难变形高温合金的组织研究

Type and Morphology of Carbide in Spray Formed High Speed Steel

喷射成形高速钢中碳化物的类型与形貌