self-heating temperature是什么意思

网络释义

用法例句

Experimental research on heating temperature of hot-reclamation of used resinbonded sands;

树脂旧砂热法再生加热温度的研究

Effect of the heating temperature and heat retaining time on the inner crack healing in steel;

加热温度及保温时间对结构钢内部裂纹愈合的影响

With the increasing of heating temperature,TiO2 film formed on pure titanium surface;the oxidation weight gain increased.

结果表明,在300~1100℃,随着加热温度的升高,纯钛氧化加重,形成氧化钛膜;300~500℃,纯钛试样增重0。

Numerical Simulation of Slab Temperature Field During Reheating and Its Application

热轧板坯加热温度场数值模拟及应用

Study on Billet Heating Temperature of Φ35 m Rotary Hearth Furnace

Φ35m环形炉管坯加热温度的研究

Heating Temperature Measurement of Slab Rotary Furnace in BTCO

包钢环形炉管坯加热温度测试和研究

Fast heating, high precision of tempt control and high thermal efficiency.

加热速度快，控温精度高，热效率高。

Hardness was decreased after maximum by high temperature heating.

高温加热硬度达最大硬度以后保温硬度降低。

Adopted far infrared metal heating tube, fast heating and energy saving.

采用远红外线金属电热管加热、热风循环，加热速度快、温度均匀、省电。

A Study of Temperature Gradient in Liquid Phase for Double-zone Heat Directional Solidification

双区加热定向凝固液相温度梯度研究

Heating Rate and Temperature Distributing on Continuous Ohmic Heating for Liquid Food

液态食品连续通电加热的加热速率与温度分布

Fuel Heater Temperature Sensor and Element Location

燃油加热器温度感知器和元件的位置

A piece of wood is heated to a high temperature.

一块木头被加热到很高的温度。

Coal is heated to successively higher temperatures in fluidized beds.

煤在流化床中逐层加热到更高的温度。

a theory that the temperature of a body increases when kinetic energy increases.

热能量增加物体的温度即提高的理论。

Metals will melt when heated to a certain temperature.

金属加热到一定的温度都会熔化。

measures high temperatures by the resistance in a heated wire.

在加热金属线中用电阻测量温度。

An oven thermometer uses a metal strip.

加热炉用金属丝作为温度计。

First, suppose the mixture is heated to the temperature T1.

首先，假定将混合物加热到温度t1。

Time and Temperature Distribution of Ohmic Heating Thawing Beef

牛肉欧姆加热解冻的时间与温度分布

The temperature is automatically con trollable in the three-section drying oven respectively.

烘箱分三段加热，温度分别自动控制.