Piston ring bank是什么意思

网络释义

用法例句

Development of Rapid Response CNC Lathe for Piston Ring;

高速响应活塞环数控车床关键技术的研究

Wear performance of cast iron piston rings strengthened by laser;

激光强化铸铁活塞环的磨损性能

The process of high-frequency induction heating of piston ring;

活塞环高频感应加热的生产工艺

Study on the extrusion process between the cutting tool and the cut surface of workpiece in cutting aluminum alloy piston ring groove;

精切铝活塞环槽过程中刀具对环槽两侧面的熨压研究

The powerful Nd∶YAG laser was used to harden the surface of prison ring groove of nodular iron,the width of piston ring groove only was 4mm,the width of hardening layer should be 5~7mm,the methods of single scanning and tilted irradiation was used.

使用大功率Nd∶YAG激光,对模拟球墨铸铁活塞环槽的试样进行了表面相变硬化,试样环槽的宽度只有4mm,硬化层宽度要求达到5~7mm,采用了单道扫描和斜入射的工艺方法,最终得到了符合要求的硬化层形貌和指标。

The abrasion between the locomotive engine piston ring groove and piston ring is one of the mostly abrasion in the firebox of locomotive engine.

本文针对这一状况,选用了表面淬火、盐浴软氮化、阴极弧表面生成TiN薄膜手段,对活塞环槽表面进行强化耐磨处理,并利用等离子硫化的手段对活塞环进行处理,从中选择最优的方式来改善活塞环槽表面磨损状况。

piston ring plier(piston ring tongs)

活塞环钳（活塞环拆装钳）

piston diameter at ring lands

活塞环处的活塞直径

cornered piston ring

棱边精车过的活塞环, 修过角的活塞环

Install rings and confirm ring side clearance:

安装活塞环，并确认活塞环侧间隙：

The grooves into which they fit are called ring grooves.

安装活塞环的凹槽称为活塞环槽。

Most pistons have three ring grooves at the top.

大多数活塞的顶部有3个活塞环槽。

piston ring back clearance

(指与活塞底之间) 活塞环内表面间隙

"Thus, piston rings must be used to provide the necessary seal. The rings are installed in grooves in the piston. Actually, there are two types of rings, compression rings and oil-control rings."

所以活塞环就用来提供必要的密封。活塞环装在活塞的凹槽中。事实上有两种活塞环,气环和油环。

internal and cylindrical centerless grinder for pistone ring

活塞环内外圆无心磨床

piston ring free gap

活塞环自由开口间隙

vertical -spindle double ended grinding mahcine for piston ring

活塞环立轴双端面磨床

Piston rings not sealing (oil being consumed by the engine).

活塞环没密封（引擎用油）。

ring gap in bore

汽缸内活塞环切口间隙

ring with coil-spring expander

螺旋弹簧胀圈活塞环

horizontal spindle double ended grinding machine for piston ring

活塞环卧轴双端面磨床

piston ring superfinishing machine

活塞环外圆超精加工机

circumferentially compressible piston ring

"沿圆周压缩的活塞环,周向压缩的活塞环"

Internal combustion engines--Piston rings--Keystone rings and half keystone rings

GB/T14223-1993内燃机活塞环梯形环和楔形环