A simple and feasible method was used in measuring the rib mark on the parts with GMT (Glass Fiber Mat Reinforced Thermoplastic).
对GMT(玻璃纤维毡增强热塑性复合材料)模压制件加强筋缩痕的大小进行定量表征,并对加强筋缩痕的成因进行分析。
This paper investigates process optimization for the specific rib with section s-3 during the gas-assisted injection molding firstly,which is to get relationship between process parameters and quality evaluations,based on the Taguchi experimental design.
对截面形状为s-3的加强筋进行工艺参数优化分析,讨论了气辅成型工艺参数对成型质量的影响程度,获得了一组较好的工艺参数组合。
By means of the analyzing for the reason resulting in the welding crack in a strengthening tendon-plate of a pressure vessel,the article puts forward the method that has resolved the problem having common phenomenon in pressure vessel operation and has been proved to be effective through practical application in years.
本文通过压力容器接管加强筋板焊缝裂纹产生原因的分析,提出了解决这一带有普遍现象问题的方法,并经实际运行证实了该方法的可行性。
The influence degree of stiffener parameters to the baffle is studied based on the orthotropic experiment method and finite element method.
将正交试验法与有限元法相结合,定量地分析了加强筋的数量和形状对遮光罩动力学特性的影响程度;根据模态分析的结果,考察了单个加强筋的参数对其动力学特性的影响。
As thin-walled bars,stiffeners subjected to the axial pressure in ship panels may trip around their roots.
作为薄壁杆件,船体加筋板架中的加强筋在轴向压力的作用下可能发生绕定轴的侧向屈曲。
Based on this classification,the orthotropic plate in structure can be transformed into that in material with different methods, which means the stiffeners are to be converted into the plates added on by a certain method,and in further,it simulates the .
根据这两种分类将加筋板按不同的方法实现了结构正交异性向材料正交异性的转化,即将板上的加强筋按照一定的方法折合到所附连的板上,进而实现材料上正交异性板的有限元软件模拟。
The main defective modes of the strengthening rib are introduced.
对机车车体这样大型而复杂的结构,合理设计加强筋的形状、厚度以及对加强筋的位置进行合理布置,不仅能增大结构的强度和刚度,还便于制造,减少工料的浪费。
Front and rear reinforcing post will have shelf-clip adjustment holes at1/2- inch increments.
前、加强筋上每隔1/英寸有隔板调节孔。
Design of Stiffener in the Electronic Cabinet Based on the Three-Field Coupling Analysis
基于三场耦合的电子机柜加强筋设计
Base cabinets are reinforced with internal reinforcing front and rear posts and will have shelf-clip adjustment holes.
底柜前部和后部支撑有加强筋,筋上有隔板调节孔。
BEM for analysis of elastic plane problems with reinforced ribs
边界元法分析具有加强筋的弹性平面问题
3 Front and rear reinforcing post will have shelf-clip adjustment holes at 1/2-inch increments.
前、后加强筋上每隔1/2英寸有隔板调节孔。
Research of Metal Bracket Bead Layout Method Based on Topography Optimization
基于形貌优化的钣金支架加强筋布置方法研究
Location optimization of stiffeners of transmission housing for a truck
载重汽车变速器壳体加强筋布置的优化设计
mesh reinforced shotcrete
钢筋网加强喷射混凝土
can body dent
罐身加强圈, 罐身压筋
Strength and deformation properties of H-V reinforced clay
H-V加筋黏性土的强度与变形特性
Initially all structures were prestressed by high-strength bars.
起初,每个桥梁都是通过高强钢筋施加预应力的。
Studies on the Performance of Aeolian Sand Reinforced by Geogrids with FEA;
加筋风积砂强度和变形特性的有限元分析
Analysis on Safety Coefficient of Reinforced Earth Structure with FEM Strength Reduction;
用有限元强度折减法分析加筋土结构的稳定性
Study on Flexural Behavior of High-strength Reinforced Concrete Beams Strengthened with CFRP;
碳纤维布加固高强钢筋混凝土梁抗弯性能研究
Research on Steel Reinforced Concrete Slabs Strengthened with High-Strength Stainless Steel Wire;
高强不锈钢绞线加固钢筋混凝土板的研究
Consolidation of the Structure of Reinforced Concrete after Fire Damage;
钢筋混凝土结构火灾损伤后的加固补强
Study on the Characteristics of Food Processing for Flour of High Quality Wheat Variety Shaan 253
优质强筋小麦品种陕253面粉食品加工特性研究
Stability analysis on reinforced retaining wall by strength reduction method
基于强度折减法的加筋土挡墙稳定性数值分析
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号