Oil aeration in the high pressure chamber of hydraulic lash adjusters in engine valve trains;
气门机构液压间隙调节器内机油混气量的估算
The Application of Virtual Prototype Technology to the Design of Valvetrain in Vehicle Engine;
虚拟样机技术在汽车发动机气门机构设计中的应用
A multi-mass-nonlinear-connection model was employed to simulate valve spring during constructing the virtual prototype of valve mechanism.
在构建气门机构虚拟样机的过程中,气门弹簧采用"多质量-非线性连接"的动力学模型,基于MSC。
"In the other kind of valve mechanism for an engine, the valves are located in the cylinder Block instead of the head."
另一种气门机构的气门是装在气缸体上,而不是装在气缸盖上。
Study on Intake Performance of SI Engine with Fully Variable Valve Hydraulic Actuation System
发动机全可变液压气门机构进气性能的研究
Hydraulic Valve Lash Adjuster (HLA) and Valve Train with HLA
液压气门间隙调节器及有间隙调节器的气门机构的研究
Research and Development on Electromechanical Valve Actuation;
电磁驱动气门机构的设计开发和试验研究
Experimental Studies on Close Loop Control Strategy for Fully Variable Valve Actuation;
全可变气门机构闭环控制策略的实验研究
Dynamic Simulation and Leakd-down Experiment of Valve Train with Hydraulic Lash Adjuster;
有液压间隙调节器气门机构的动力学模拟及泄沉特性试验研究
"The oil is thrown upward as droplets or fine mist and provides adequate lubrication to valve mechanisms, piston pins, cylinder walls, and piston rings."
飞溅上来的油形成油滴或油雾,使气门机构、活塞销、气缸壁和活塞环得到充分的润滑。
indirect valve gear
间接式气门驱动机构
direct valve gear
直接式气门驱动机构
Study on 4-Valve Engine Valve-Train System
发动机四气门配气机构系统分析研究
Optimization Design of Four-valve Valve-train Based on ADAMS
基于ADAMS的四气门配气机构优化设计
Oxygen control valves consist of valve, actuator and accessories.
氧气调节阀由阀门,气动执行机构及附件组成.
The value-opening mechanism includes a valve lifter and a cam on a camshaft.
一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。
Study of the Actuation Mechanism and Control System for a Electromechanical Valve of Engine;
发动机电磁气门驱动机构及其控制系统研究
The cylinder head carries the valves, valve springs and the rockers on the rocker shaft, this part of the valve gear being worked by the push-rods.
气缸盖携带阀门,气门弹簧和在摇臂杆上的摇臂,这部分的气门传动机构通过推杆工作。
Analysis of Magnets in Electromagnetic Valve Actuation
发动机电磁气门驱动中的电磁铁结构方案分析
A high power, wide torque range, efficient engine with a newly developed variable-valve-lift &-timing mechanism
新型可变气门升程和定时机构的大功率、宽扭矩高效发动机
All valves are available with hand-wheels, gearing, electric motor actuators or pneumatic or hydraulic cylinder actuators.
所有阀门都可配置手轮,齿轮操作机构,电动马达执行机构,或者气动或液动缸体执行机构。
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号