This paper reviews characteristics of the process and performance of sandwich structures with different cellular solids core and FRP skins.
本文从制造工艺和材料性能等角度评述了FRP高性能夹层结构用芯材的特性,认为不同的多孔固体芯材在高性能夹层结构中是不可替代的,它们之间互为补充。
In this thesis, ZnO bulk porous nanosolids were prepared by a novel solvothermal hot press (STHP) method for the first time using ZnO nanoparticles with different pore-forming agents including deionized water, various surfactant solution.
在本文中,我们利用溶剂热压方法,首次以去离子水和不同种类的表面活性剂溶液作为造孔剂,以ZnO纳米颗粒作为原料,制备了ZnO多孔纳米固体。
Using TiO_2 nanoparticles as the starting material, PMMA/TiO_2 composite porous nanosolids have been prepared by a novel solvothermal hot-press (STHP) method for the first time.
在本文中,我们利用溶剂热压方法,以TiO_2纳米粉作为原料,采用两种不同方法制备了PMMA/TiO_2复合多孔纳米固体,通过热处理成功地获得了孔径大小均一且在空间均匀分布的TiO_2多孔纳米固体;以不同的聚合物凝胶作为模板,用溶剂热压法成功地制备了具有不同比表面积和孔容的TiO_2多孔纳米固体。
With unique Hydrothermal Hot-Press (HHP) technique, using ZnO nanopowdcrs (with average particle size of 30nm) as the starting materials, a new type of nanomaterial, bulk ZnO porous nanosolid was prepared.
ZnO多孔纳米固体制备的厚膜传感器在空气中的电阻大大减小,最佳敏感温度降低、响应时间和恢复时间大大缩短。
Boundary Conditions for Porous Solids Saturated With Viscous Fluid
多孔固体充满黏性流体时的边界条件
Studies on Multicomponent Adsorption Equilibrium of Gas Mixture on Porous Solids;
多组分气体混合物在多孔固体上吸附平衡研究
Preparation of Porous Solid Bases by Employing Active Carbon as Template
以活性碳为模板制备多孔固体碱催化剂
THE HOLE-FILLING METHOD OF HEAT-CONDUCTION PERFORMANCES FOR A KIND OF PERIODIC PERFORATED MATERIALS
一类周期多孔固体材料热传导性能计算的孔洞填充方法
Studies on Multicomponent Adsorption Equilibrium of Supercritical Gas Mixture on Porous Solids;
多组分超临界气体混合物在多孔固体上吸附平衡的研究
Al_2O_3 Porous Nanosolid Prepared by SHP Method and Its Dielectric Properties;
溶剂热压法制备氧化铝多孔固体及其介电性能研究
Preparation and Properties of PVDF/PVA Porous Immobilized Vector
PVDF/PVA多孔固定化载体的制备和性能
Study on Oxide Porous Nanosolid Gas Sensors
氧化物多孔纳米固体气敏传感器的研究
Experimental Research of Hollow Brick Masonry Strengthened with Common GFRP Sheet;
普通玻璃纤维布加固多孔砖砌体的试验研究
Preparation of Series Porous Ceramic Filter Materials from Waste Solid;
利用固体废弃物制备系列多孔陶瓷滤料
Improvement of Porous Cathode for Intermediate-Temperature Solid Oxide Fuel Cells
中温固体氧化物燃料电池多孔阴极的改性
Study on hydrodynamic performance of porous medium plate
多孔介质固阀塔盘流体力学性能的研究
Study on the Preparation of Immobilized Enzyme Carrier--Porous Chitosan Microsphere
固定化酶载体——多孔壳聚糖微球的制备研究
Investigations on Porous Magnetic Carrier and Solid Base Catalyst from Layered Precursors;
层状前体法制备多孔尖晶石型磁性载体及固体碱催化剂
pore volume of porous packing
多孔填充剂的孔体积
In saturated flow through a porous medium a force is exerted by the fluid on the solid matrix.
在通过多孔介质的饱和流动中,流体会对固体骨架施加力。
Study on the Start-up of the Integrated Bioreactor and Modification of Porous Carrier on Microorganism Immobilization;
一体式生物反应器启动实验研究及微生物固定的多孔载体改性
Material point method for dynamic analysis of saturated porous media (Ⅱ): dynamic contact analysis between saturated porous media and solid bodies
基于物质点方法饱和多孔介质动力学模拟(Ⅱ)——饱和多孔介质与固体间动力接触分析
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号