conditional entropy是什么意思

网络释义

用法例句

The tensile performance and fatigue crack growth behavior of sand casting A356 aluminum alloy samples with three different quenching conditions in same solution heat treatment and ageing condition were investigated.

结果表明 ,随淬火介质温度的降低 ,淬火冷却速率提高 ,合金的强度增加 ,塑性下降 ;当应力比R较低时 ,淬火条件对合金疲劳门槛区的裂纹扩展有明显影响 ,降低淬火介质温度可以提高合金的疲劳裂纹扩展阻力。

The influence of different solvents on the stability of LiTaO3 sols and the influence of different annealing condition on the preparation of LiTaO3 thin film were analyzed either.

用溶胶凝胶法在ITO衬底上制备了钽酸锂(LiTaO3)薄膜,利用XRD、SEM和AFM对薄膜的晶向、表面形态等作了表征;研究了不同溶剂对LiTaO3溶胶稳定性的影响和不同退火条件对LiTaO3薄膜结晶的影响;利用Al/LiTaO3/ITO结构,测试了薄膜的介电系数和介电损耗。

The effects of cold-rolled and annealing conditions on the high-strength IF steel were studied.

研究了冷轧和退火条件对高强IF钢性能的影响,结果发现,无论在何种退火条件下,增加冷轧压下率有利于深冲性能的提高,提高退火温度对高强IF钢的深冲性能有利。

Influence on the permeability of Fe_(73.5)Si_(13.5)B_9Cu1_Nb_(3-x)Al_x under different annealing conditions;

不同退火条件对Fe_(73.5)Si_(13.5)B_9Cu1_Nb_(3-x)Al_x磁导率的影响

In detail,the saturation diffraction efficiency,the fixing diffraction efficiency,the recording sensitivity and the effect of annealing conditions are investigated experimentally.

采用三种不同的双光记录方案进行了LiNbO3∶Fe∶Ni晶体全息存储实验,详细研究了饱和衍射效率、固定衍射效率、动态范围和记录灵敏度,以及退火条件对记录的影响。

An ignition law of lateral pulse rockets and guidance policy of terminal correction was given for air defense missile by combined control of lateral thrust and aerodynamic force.

针对力矩式直接力/气动力复合控制防空导弹,给出一种姿控固体小火箭的点火条件和末端修正制导策略,并通过仿真计算研究了对不同运动特性目标的拦截能力以及主要误差因素对终端脱靶量的影响。

Effect of Tempering Process on Hardness of 27SiMn Steel in Zero Time Holding Quenching

零保温淬火条件下回火对27SiMn钢硬度的影响

A Kind of New Quenching Process for H13 Shaft-Parts with Polymer Quenchant

基于有机淬火介质的一种H13钢轴件新型淬火工艺

induction or dielectric machine for hardening metal parts

感应或介质电机淬火金属零件用

Design of Timed Quenching Process for 42CrMo4 Steel Shaft

42CrMo4钢轴类件控时淬火冷却工艺的设计

Step Iso-Thermal Quenching Process Used to Obtain Heavy Section ADI Casting

用于厚大ADI铸件的分级淬火工艺

The ABAQUS simulation of temperature filed in quenching process of 45 steel part

45钢零件淬火过程中温度场的ABAQUS模拟

Controlled Atmospheres for Quenching and Carburizing of General Machine Parts

通用机械零件淬火及渗碳用控制气氛

How to Place Your Workpiece during oil Quenching(一)

淬火冷却中工件的正放与斜放(一)

Effects of cold drawing and water quench process on mechanical properties of prestressed wires have been studied in laboratory.

在实验室条件下研究了冷拔与水淬火工艺对予应力钢丝力学性能的影响。

Under high stress or low stress abrasion working conditions, high Cr white cast iron can be used just after it having been air quenched.

高应力磨料磨损或低应力磨料磨损工况条件下,高铬白口铸铁空淬后不须回火可直接应用。

Technical requirements for structural steel with specified hardenability bands

GB/T5216-1985保证淬透性结构钢技术条件

Early Failure of Steel Parts and Uncontrolled Microstructure after Carburizing,Post-Quenching and Tempering

钢件渗碳淬回火组织失控及构件的早期失效

Uneven hardening, with the formation of soft spots, increases warpage.

淬火不均部件上将出现软点，增加翘曲可能性。

The Surface Quench Process Research and Application for Big Ring Raceway;

大型环件滚道表面淬火工艺研究及应用

Analysis and Research on Universal Grinding Machine s Quench Spliting;

万能工具磨床钳口件淬火开裂的分析与研究

Numerical Simulation of Water Air Alternative Quenching Process for Large Steel Forging

大型锻件水空交替淬火过程的数值模拟

Online ENDT for hardness of iron and steel parts based on online LS-SVM

基于Online LS-SVM的钢铁件淬火硬度在线检测

Magnetic Field Shielding in End-to-end Zone of Brachy-axis-like Parts during Continuous Induction Quenching

连续感应淬火的短轴类零件首尾连接处的屏蔽