face cam是什么意思

网络释义

用法例句

NC machining of edge cam based on Proe2001 and Cincinnati VMC-1000;

基于Proe2001和辛辛那提马刀1000的端面凸轮NC加工

The precisely processing methods for forming the cam plate of the VE pump are introˉduced.

分析了VE泵端面凸轮的3种精密成形加工方法 ,确定了端面凸轮冷摆辗精密成形的合理模具结构 ,并对该模具的加工工艺作了介

This paper puts forward the compound forming of warm forging and cold rotary forging to make closedtolerance cam plate forgings;it can obviously improve the material's utilization and extend the die's service life,and contribute to cost reduction deeply.

　采用温锻制坯与冷摆辗相结合的复合成形工艺生产VE泵端面凸轮精密成形件,不仅材料利用率可达到95%左右;而且成形件的尺寸精度高,表面光洁度高,能有效地减少后续仿形磨削加工的余量,从而降低了生产成本,提高了生产效率。

NC machining of planar cam based on proe2001 and cincinnati VMC-1000;

基于proe2001和辛辛那提马刀1000的平面凸轮NC加工

NC Machining of Planar Cam Based on UG;

基于UG的平面凸轮NC加工

The application of substitute equivalent linkage instead of higher pair in kinematic analysis of a planar cam mechanism with a roller translating follower;

高副低代在滚子直动从动件平面凸轮机构运动分析中的应用

Study on Method of Data Processing in Measurement of Plate Cam Borderline;

平面凸轮轮廓线检测数据处理方法研究

The measurement of plate cam contour line on the numerical control grinding machine is introduced in this paper.

介绍了在数控凸轮磨床工作台上对平面凸轮轮廓线进行检测的方法,主要包括检测原理,系统硬件构 成,以及系统软件的数据采集与数据处理等方法。

NC program of plane cam and its error controls;

平面凸轮数控加工程序及其误差控制

Finite Element Modal Analysis of Plane Cam;

平面凸轮有限元模态分析

This paper discusses the 3D modeling method of plane cam with 3D software of PROE,and according to the redevelopment method,an independent programming interface is designed to drive PROE to achieve parametric 3D modeling of plane cam with the software of VB and Automation Gateway(AGW).

利用PROE实现了平面凸轮的三维建模,并通过VB和Automation Gateway(AGW)对PROE进行了二次开发,设计了独立的程序界面以驱动PROE完成平面凸轮的参数化三维建模。

Digital design of cylindrical end cam based on curve fitting and correction

基于曲线拟合修正的圆柱端面凸轮数字化设计

THE APPLICATION AND DESIGN OF THE CAM INDEX DRIVE IN A CAP SCREWER

旋盖机端面蜗形凸轮机构的应用与设计

STUDY ON PROFILE MODIFICATION OF ROLLER GEAR CAM MECHANISMS

弧面分度凸轮机构凸轮廓线修形研究

Ferguson Cam Mechanism and the Design of Cam Surface

福开森凸轮机构及其凸轮轮廓曲面的设计

tyre having a lump or bulge

轮胎面起硬块或凸起

The Method of Checking Cylindrical Indexing Cam Contour with Cam Check Meter

用凸轮检测仪检测圆柱分度凸轮廓面的方法

locking cam keeper of container end frame

集装箱端架锁凸轮杆插座

Turn the top feed cam until it reaches the position to allow the three components such as the throat plate surface, top end of needle eyelet and presser foot (pressing plane) to align, and fix the cam at that position.

在针板上面、针孔上端、中压脚(压脚面)的3点对齐的位置，转动上送布凸轮，然后固定。

Flat belt drive pulleys-crowns

GB/T11360-1989平带传动带轮轮缘凸面

A study of cam profile equations and engagement features for cam mechanisms with planar envelope and globoidal indexing

平面包络弧面分度凸轮机构凸轮廓面方程与啮合特性的研究

Fundamental Equation for Cam Mechanisms-from Planar to Spherical

凸轮机构的基本方程:从平面到球面

The Profile Determination of Conical Cam with a Translating Follower Based on the Theory of Envelopes

应用包络面理论建立直动从动件圆锥凸轮机构凸轮廓面方程

Research on the Automatic Equipment for the Jointing of the Knurling Assembled Camshaft End Socket;

滚花装配式凸轮轴端头连接自动化装备研究

Pinholes are the defects often found in cam surface layer after re-melted and chilled.

凸轮面针孔是凸轮轴重熔淬火工艺容易产生的质量问题。

The camshaft also fits inside the block, except on overhead-cam engines( OHC).

除了顶置凸轮(HC)动机以外，凸轮轴都安装在气缸体里面。

Basic Principles of Non-Equivalent Machining of Spatial Cam Surfaces

空间凸轮廓面非等价加工的基本原理

THREE DIMENSION FINITE ELEMENT ANALYSIS OF ROLLER GEAR INDEXING CAM MECHANISM

弧面分度凸轮机构的三维有限元分析

Research of the dynamic features of globoidal indexing cam mechanisms

弧面分度凸轮机构动力学特性的研究