With the X-ray stressmeasurer, the residual stress of machined surface was measured when aluminum alloy be fine-cutted by cemented carbide on different cutting condition.
用X射线应力测量仪测量了不同切削条件下铝合金工件表面的残留应力。
Effects on choking by grinding wheel characteristic and cutting condition are expounded.
本文对砂轮堵塞过程和机理进行了探讨,分析了砂轮堵塞的类型和原因,论述了砂特特性和切削条件对堵塞的影响,为选择砂轮提供了一定依据。
This profile modeling functions as follows: The cutters point is made to move along the locus in compliance with the outline curve of the cam to be machined; the cutter is constantly ensured to have good cutting conditions in cutting process.
靠模的作用在于:使刀尖的运动轨迹与所欲加工的凸轮轮廓相一致;保证在加工过程中,刀具始终具有良好的切削条件。
Defining metal work of hard-to-cut metal material, cutting conditions,tool shap es,metal material used in die & mould with discussing hardness.
本文分析了模具用难切削材料的硬度、韧性、延展性、加工硬化性、显微组织、热性质及切削阻抗等,讨论了模具用材料的加工、切削条件、刀具形状及材料的确定和选择方法。
Some equations of anisotropic acousto-optic (AO) diffraction geometry have been derived by the aid of tangent condition.
利用相切条件推出了计算TeO2晶体反常声光衍射几何关系的方程,给出了zt平面内光波矢量的入射角和衍射角、超声极值频率、声光优值等参数随超声离轴角而变化的曲线。
In order to improve the performance of lithium niobate acousto-electro-optic(AEO) modulator,the acousto-optic operating modes were systematically studied according to tangent condition after the determination of electro-optic operating mode.
为进一步提高铌酸锂声电光调制器的性能,在确定器件的电光工作模式后,利用相切条件办法对相应的声光工作模式进行了系统的研究。
The Effect of Cutting Conditions on the BuiIt.up Edge in Carbon Steel Cutting
切削碳钢时切削条件对积屑瘤的影响
The Influence of Cutting Fluid on the Critical Cutting Condition in Precision Machining of Optical Glass
切削液对光学玻璃精密切削临界切削条件影响的研究
Dynamic Modeling, Simulation and Optimization of High Speed Milling under Complicated Cutting Conditions;
复杂切削条件高速铣削加工动力学建模、仿真与切削参数优化研究
forming process and mechanism of cutting direction burr under orthogonal cutting are simulated and analyzed;
仿真并分析了正交切削条件下切削方向毛刺的形成过程与机理;
Study of Experiment and Modeling and Control under Hard-Dry Cutting;
硬态干式切削条件下切削力实验建模与控制的研究
Continously,by the method of orthogonal design,in the certainconditions, the mathematic models for cutting force and temperature were esta-lished;
继而,采用正交设计试验方法,建立了某些切削条件下,切削力、切削温度的数学模型;
Analysis on Impact of Cutting Conditions in Microstructure Surface Ultra-Machining Process
微结构表面超精密加工中切削条件的影响分析
General specifications for metal-cutting machine tools
GB/T9061-1988金属切削机床通用技术条件
Free-cutting steel--Technical requirements
GB/T8731-1988易切削结构钢技术条件
Limit Change Condition of Forward Burr and Fracture
切削方向毛刺与亏缺的界限转换条件
Study on the Cutting Force of Austenitic Stainless Steel Under the Condition of Dry Cutting and Minimum Quantity Lubrication
奥氏体不锈钢在干切削和微量润滑条件下的切削力的研究
Metal-cutting machine tools--General safeguarding specificatio
GB15760-1995金属切削机床安全防护通用技术条件
Simulation and Cutting Experiment of Hard Cutting under Air Cooling Cutting
风冷条件下淬硬钢切削过程的仿真与试验
NUMERICAL ANALYSIS FOR TEMPERATURE FIELD OF ORTHOGONAL CUTTING UNDER DIFFERENT CONDITIONS
不同条件下的正交切削温度场的数值分析
RESEARCH ON GRANITE CUTTING AND BREAKING TEST UNDER CONDITIONS OF HIGH TEMPERATURE AND HIGH PRESSURE
高温高压条件下花岗岩切削破碎试验研究
Orthogonal Cutting Force Model with Tool Flank Wear
考虑后刀面磨损条件下的正交切削模型分析
Metal cutting tools must possess a variety of different properties in order to cut the different metals under varying conditions of severity.
金属切削刀具必须具有许多不同性能才能在各种恶劣条件下切削不同的金属。
high-speed thread cutting attachment
高速螺纹切削附件[装置]
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号