rolled iron是什么意思

网络释义

用法例句

Furthermore, two new technologies, semi endless rolling and ferritic rolling, are introduced, which have been used.

进一步介绍了为生产超薄带开发出来的两项新技术—半无头轧制和铁素体轧

Through analysis,the best optimization ferritic rolling process is determined.

通过对本钢薄板坯板连铸连轧生产线铁素体轧制工艺开发过程进行工艺跟踪及现场取样,对钢板的金相组织和力学性能检验,将不同生产工艺下钢板的组织与力学性能进行对比分析,确定了低碳钢铁素体轧制最优的热轧与冷轧生产工艺。

Through analysis the best optimization ferritic rolling process is determined.

针对本钢 FTSR 生产线铁索体轧制工艺开发过程进行工艺跟踪及现场取样,进行金相组织和工艺性能检验,分析不同生产工艺下钢板的组织和力学与工艺性能,确定了低碳钢铁素体轧制最优的热轧与冷轧生产工艺。

Research and Application of Ferrite Rolling at Home and Abroad;

国内外铁素体轧制的研究和应用

It laid the foundations for manufacturing mild steel with good performance through ferrite rolling process.

介绍了唐钢薄板坯连铸连轧生产线利用铁素体轧制工艺生产低碳冷轧基板的生产工艺,分析了铁素体轧制工艺参数对钢板组织与性能的影响,为采用铁素体轧制生产性能良好的低碳软钢奠定了一定的基础。

Through localization of manufacture of SEN(submerged entry nozzle) and supply of mould powder for thin slab casting and technology improvement,innovation of breakout prediction system,ferrite rolling,semi-endless rolling and so on,the productivity of the plant reaches to 3000000 ton coils .

并通过浸入式水口、保护渣国产化研究和对漏钢预报、铁素体轧制和半无头轧制等技术完善与创新,使超薄热带生产线达到年产300万t的生产能力。

The industrial experiment of super deep drawing cold rolled strip production based on hot rolling in ferrite area were done at Angang.

通过铁素体轧制生产超深冲冷轧Ti-IF钢的工业试验,研究了化学成分、工艺制度对热轧IF钢金相组织、织构和第二相粒子析出的影响,分析了热轧IF钢再结晶状态与产品性能的关系,阐述了提高冷轧Ti-IF钢深冲性能的生产控制要素。

Applying Ferrite Rolling Technology to Producing Ultra-Thin Hot-Rolling Strip Steel

采用铁素体轧制技术生产超薄热轧带钢

Production Controlling Method during Hot-rolling of Super-pure Ferritic Stainless Steel

超纯铁素体不锈钢热轧生产控制方法

ELC Steel Production by Ferritic Hot Rolling Process

应用铁素体区轧制工艺生产ELC钢

Effects of Cold Rolling Reductions on Microstructure of Hot Rolled Ti+P-IF Steel in Ferrite Region

冷轧变形量对铁素体区轧制Ti+P-IF钢微观组织的影响

Study on Recrystallization Behavior of Ferritic Rolled IF Steels;

铁素体区轧制IF钢退火过程再结晶规律的研究

Microstructure and Properties of SPHE Steel Produced by Ferrite Rolling Using FTSR

FTSR铁素体区轧制生产SPHE钢的组织与性能

Experimental Study on Ti Bearing Ultra-low Carbon Bake Hardening Steel Sheet Hot-rolled in Ferrite Region

Ti超低碳烘烤硬化钢铁素体区轧制试验研究

The Edge Defects Control for Production Ferritic Stainless Steel in JISCO Rolling Mill

酒钢炉卷轧机生产铁素体不锈钢黑卷边损缺陷控制

Optimization and Perfection of the Rough Rolling Module for Ferrite SUS430

铁素体SUS430粗轧模型优化与完善

Pilot Production of Hot Rolling in Ferrite Region for Cold Rolled Extra-low Carbon Steel Strip for Deep Drawing

深冲用超低碳冷轧带钢铁素体区热轧的现场试验

Effect of Solidification Structure in Strip Cast Ferritic Stainless Steel on Grain Colonies of Cold-Rolled and Annealed Band

铁素体不锈钢铸轧薄带凝固组织对冷轧退火带晶粒簇的影响

Texture evolution in a high-strength Ti-IF steel during ferritic hot rolling and cold rolling

高强Ti-IF钢铁素体区热轧和冷轧过程织构演变规律

Cold rolled low-carbon steel sheet--Ferrite grain size--Test methods

GB/T4335-1984低碳钢冷轧薄板铁素体晶粒度测定法

The Study on Microstructures and Textures of Ferritic Hot-Rolled High Strength IF Steels;

铁素体区热轧高强IF钢微观组织及织构的研究

Effect of ferritic region hot-rolling on deep draw ability of Ti-IF steel

铁素体区热轧工艺对Ti-IF钢深冲性能的影响

Effect of FDT on the Ridging Resistance Property of Ferritic Stainless Steel SUS444

终轧温度对SUS444铁素体不锈钢抗起皱性能的影响

The Research of Mechanical and Weld Properties of 400 Series Hot Rolled Ferritic Stainless Steel Plates

400系铁素体不锈钢热轧板材力学性能及焊接性能的研究

Research on Microstructure Characteristics and Its Effects on Performance of Hot-rolled Ferritic Stainless Steels

铁素体不锈钢热轧态组织特征及其对性能影响研究