Effect of neodymium on microstructure and mechanical properties of AZ91 magnesium alloy;
钕对AZ91镁合金组织及机械性能的影响
Deposition of TiAlN film by reactive magnetron co-sputtering and related mechanical properties;
磁控共溅射制备氮化钛铝薄膜及其机械性能的研究
Optimization of PMC and its mechanical properties;
聚合矿物复合材料组分优化与机械性能
Testing the mechanical property of late-model CuAlMnX shape memory alloy;
新型铜基记忆合金(CuAlMnX)机械性能测试
Effect of PAN using amount on morphology and mechanical property of Ni/epoxy resin/PAN composite;
聚苯胺用量对镍粉/环氧树脂多功能复合材料分散行为和机械性能的影响研究
An Intelligent Instrument for Testing Mechanical Property of Green Sand;
铸造型砂机械性能智能测试仪的研究
Investigation on experiment rig of measuring mechanical performances;
机械性能检测实验台的研制
Study on Relationship between Sensitivity and Mechanical Performance of Optical Fiber Sensor;
光纤传感器灵敏度与探头机械性能关系的研究
Cryogenic treatment attracts much attention and obtains practical application in wide fields,since it helps to improve the mechanical performance of some metal or nonmetal materials,such as strength,hardness,abradability and dimension stability.
深冷处理对于一些金属材料乃至非金属材料的强度、硬度、耐磨性和尺寸稳定性等机械性能的提高能够起到积极作用,因而广受关注并获实际应用。
In terms of the TL VW011 standard of Volkswagen,experimental data have been investigated by the application of such mathematical methods as normal distribution and recursive analysis in order to determine the relation among chemical component, mechanical behavior and metallographic organization.
以德国大众汽车公司TL-VW011标准为依据,通过对1996年1~5月大量数据的类比分析、正态分析和回归分析等数理方法,寻找桑车后制动鼓的化学成份与机械性能、金相组织之间的关系,并严格控制熔炼工艺,从而使其金相组织、楔压强度、硬度的报废率从14。
Under a certain circumstance of determined optaimal component and casting technics, after researching the affection on mechanical behavior by heat treatment technics, the optimal specification of heat treating the alloy would be drawn up.
高强度铝合金是多元Al-Si合金,本文在确定最佳成份及铸造工艺条件一定的情况下,研究了热处理工艺对机械性能影响的关系。
Fiber filled resin can improve the mechanical characteristics of the parts manufactured by adopting stereolithography process.
对于快速成型中的光固化制作工艺 ,在光敏树脂中加入短纤维而制得的零件的机械性能可得到改善 。
The detection for mechanical characteristics of high volatge circuit breaker is important.
高压断路器故障大多数是由机械原因造成的 ,故而对其进行机械性能检测十分重要。
In this study,the mechanical characteristics of TRUM are tested under high temperature environment.
通过对行波型旋转超声电机在高温环境下进行了机械性能测试,得到了超声电机高温环境机械特性:超声电机的空载转速有所下降,但最大力矩随着温度的升高而增大,在70℃时,超声电机的堵转力矩达到最大,在80℃时,堵转力矩微降。
In this paper, the compressed non asbestos fiber reinforced rubber sheet (CFS) gasket materials mechanical behaviour is researched.
对所研制的几种压缩非石棉 (CFS)密封板的机械性能进行了试验研究 ,比较了压缩非石棉板与传统石棉橡胶板 (CAF)和进口CFS的差异 ,分析了代石棉纤维含量对石棉板性能的影响 ,阐述了适宜的纤维及其含量有利于提高板材的综合性
With respect to ring tapered differential planet stepless speed changer,the authors analyse its driving principle and structural characteristics;and discuss the characteristics of main mechanical behaviour in loading test;and point out its application range and what should be noted in design and technology.
分析环锥差动行星无级变速器的传动原理及其结构特点,并讨论其负载试验中主要机械性能的特性。
thermal mechanical performance testing apparatus
热机械性能试验装置
Mechanical Property Analysis of GETM12P60 Permanent-magnet Synchronous Traction Machine
GETM12P60永磁同步曳引机的机械性能分析
Study on the Mechanical Property of the Digital Multi-power Drive Comber
数字化多轴驱动精梳机机械性能研究
Study on Match of C6121 Diesel Engine with Construction Machinery
C6121柴油机与工程机械性能匹配的研究
Performance is less important than reliability in a car.
汽车的可靠性比其机械性能更重要.
Mechanical Performances of the Tenting Flexible Composites;
篷盖类柔性复合材料机械性能的研究
Mechanical properties of interchangeable magnetic eleven-disk pack
GB/T2310-1980十一片可换磁盘组的机械性能
Mechanical properties of interchangeable magnetic six-disk pack
GB/T2309-1980六片可换磁盘组的机械性能
Mechanical property requirements for studs shall be the same as those for bolts.
柱头螺栓的机械性能要求与螺栓相同。
Mechanical properties of fasteners--Nuts with fine pitch thread
GB/T3098.4-1986紧固件机械性能--细牙螺母
Mechanical properties of fasteners--Tapping screws
GB/T3098.5-1985紧固件机械性能自攻螺钉
Mechanical properties of fasteners--Set screws
GB/T3098.3-1982紧固件机械性能紧定螺钉
Mechanical properties of fasteners--Nuts
GB/T3098.2-1982紧固件机械性能螺母
Mechanical properties of fasteners--Self-drilling tapping screws
GB/T3098.11-1995紧固件机械性能自钻自攻螺钉
Super mcchanical properties and ideal polishing effects.
卓越的机械性能和理想的抛光效果。
Study on the Mechanical Properties of (Ti,V)C/Fe Produced by In-situ Synthesis;
(Ti,V)C/Fe的原位合成及机械性能研究
Research of 60Si2CrVAT Spring Steel Mechanical Porperties;
60Si2CrVAT弹簧钢机械性能的研究
Research on the Mechanical Seal CAT Device and the Performance of the GY70 Mechanical Seal;
机械密封CAT装置及GY70机械密封性能的研究
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号