shear strength是什么意思

网络释义

用法例句

On shear strength testing method of explosion cladding joint;

爆炸复合接头剪切强度测试方法研究

Effect of magnetic field on shear strength of adhesively bonded single lap joint;

外加磁场对粘接接头剪切强度的影响

Interfacial reaction and shear strength of Sn-Zn-Cu/Cu joints;

Sn-Zn-Cu/Cu界面反应及剪切强度

The adjusted shearing strength formula of rough rock joint;

粗糙岩石节理剪切强度的修正公式

Effect of rosin contents of lead-free solder paste on the shearing strength of the weld spot;

无铅焊膏中松香含量对焊点剪切强度的影响

Study of the shearing strengths of marine sediment in the China’s mining region;

海底沉积物剪切强度的试验研究

Effect of different surface conditioning on shear bond strength of different types of luting cements to ceramics;

瓷表面不同处理方法及粘结剂对全瓷剪切强度的影响

Study of shear bond strength of light-cured and resin-reinforced glass ionomer cement immediately after bonding;

光固化树脂加强型玻璃离子水门汀即刻剪切强度的测定

Comparative study on the shear bond strength of light-cured glass ionomer cement between etching and nonetching;

酸蚀对树脂加强型玻璃离子抗剪切强度的影响

Evaluate of shear bonding strength of a self-etching adhesive to dentine in different conditions;

牙本质表面不同状态对自酸蚀体系剪切强度影响的实验研究

Objective:The aim of the study was to investigate the effects of different etching time on shear bonding strength to guide its clinical use.

目的:研究不同酸蚀时间和不同施力方向对正畸托槽与牙面间剪切强度的影响。

To investigate the effects of different surface conditioning methods on the shear bonding strength of glass-infiltrated ceramic to dentine, 24 glass-infiltrated ceramic testing-pieces were divided into four groups randomly.

用Super Bond与牙本质粘接 ,测其剪切强度。

The effect of crystal powder on the shear strength and expansion ratio of the crystal powder/epoxy resin composite by different composition and technology was studied systematically.

对水晶粉/环氧树脂复合材料的抗剪切强度、热膨胀系数进行较系统的研究,并用扫描电镜(SEM)对水晶粉/环氧树脂复合材料断面显微结构进行了观察。

Gauging the shear strength,tensile strength and modulus,glass transition temperature of the composite and their change during the aging test.

选用TDE-85和E-51作为主体树脂,制备了一种T700碳纤维复合材料,并对这种复合材料进行耐湿热老化研究,分别测定其抗剪切强度、抗拉伸强度及模量和玻璃化转变温度随老化时间的变化值。

This paper briefly introduces the use of the cable bolt anchoring technology, initially analyzes the anchoring mechanism of the fully bonded cable bolt in the jointed rock mass, and examines some factors affecting the tensile bond strength and the shear strength of the cable bolt in the jointed rock mass.

简要介绍了锚索加固技术的应用，并对全长粘结式锚索在节理岩体中的锚固作用机理进行初步分析，同时对节理岩体中锚索加固的抗拉粘结强度及抗剪切强度的影响因素进行了分析。

Comparison on shear bond strength of edgewise brackets bonding with three orthodontic adhensives under different adhensive conditions;

3种正畸秞质粘接剂在不同粘接条件下的抗剪切强度比较

Objective To observe the shear bond strength after different methods are adopted to deal with the enamel with fluoride.

方法挑选因正畸需要而拔除的96颗双尖牙,随机分为对照组、酸蚀前加氟组、酸蚀液中加氟组、酸蚀后加氟组,粘接托槽后进行冷热循环实验,测定并记录托槽抗剪切强度及黏接剂残留指数计分评估。

Result:The shear bond strengths were negative relative to the roughnes.

各组处理后涂底涂剂,与硅橡胶粘结,测试其抗剪切强度,观察其破坏方式。

testing methods for shear strength of plastics by punch tool

塑料剪切强度试验方法

uniform strain shearing strengh tester

等应变剪切强度测试仪

"Maximum shear Strength 63Kg/mm2(90,000psi) maximum (based on 75% yield) "

剪切强度最大63Kg/mm2(90000psi)(为屈服强度的75%)

Testing Method for Tensile and Shear Strength of High Strength Photosensitive Glue

高强度光敏胶拉伸剪切强度测试方法

Ebonite--Method of test for shearing strength

GB/T1700-1982硬质橡胶抗剪切强度试验方法

Thermal sprayed metallic coatings-Determination of shear strength

GB/T13222-1991金属热喷涂层剪切强度的测定

Testing methods for shear strength of plastics by punch too

GB/T15598-1995塑料剪切强度试验方法穿孔法

testing methods for shear strength of adhesive bonds by tensile loading

用拉伸负荷测定粘合剂剪切强度

testing methods for strength properties of adhesives in shear by compression loading

胶粘剂压缩剪切强度试验方法

The shear strenth is equal to the cohesion of substance.

剪切强度等于物质的内聚力。

Test Attempt to Shear Strength of in Terface for Embedded Optical Fiber Sensors

埋入式光纤传感器界面剪切强度实验

Effect of reflow soldering on IMC and shear strength of SnAgCu solder joint

回流焊对SnAgCu焊点IMC及剪切强度的影响

Effects of particle shape on shear strength of discrete media

颗粒形态对离散介质剪切强度的影响

Shear Strength of R/C Bridge Cantilever Slabs

钢筋混凝土桥悬臂板的剪切强度分析

Study on Residual Shear Strength of Reinforced Concrete Bridge Columns under Strong Seismic Ground Movement;

强震动下钢筋混凝土桥墩的残余剪切强度研究

Cellular plastics--Determination of shear strength of rigid materials

GB/T10007-1988硬质泡沫塑料剪切强度试验方法

testing methods for strength properties of adhesives for wood in shear by tension loading

胶粘剂拉伸剪切强度测定方法 (木材对木材)

Testing method for compressive shear strength of dowel joint by inorganic adhesives

GB/T11177-1989无机胶粘剂套接压缩剪切强度试验方法