Application of low softening point 204 resin in bead filler compound of BTR tire;
低软化点204树脂在全钢子午线轮胎中的应用
Mathematically modeling of the softening point in ISP sintering;
ISP烧结块软化点数模建立的研讨
Experimental feature of softening point of SBS modified asphalt;
SBS改性沥青软化点试验特性
These resins were characterized by acid value,soft point,DSC-TGA,and compared with rosin.
合成高沸醇木质素改性松香树脂,测定改性树脂的软化点、酸值和DSC-TGA曲线,并与原料松香进行比较。
In order to obtain the preferable impregnation performance and reduce the cost of C/C composite,much attention should be given to the factors of fluidity,viscidity,soft point etc.
为获得较好的浸渍性能,在提高沥青残炭率的同时,应兼顾其流动性、粘度和软化点等因素,以减少浸渍次数,降低 C/C 复合材料的成本。
Using linear regression method, the authors give a function of soft point of bitumen as temperature and resistance.
本文利用线性回归的方法给出沥青软化点与电阻率和温度的函数关系式。
The intrinsic viscosity,morphology and microstructure of the five polyester engineering fibers and the softening temperature,penetration and ductility of the fibers modified pavement asphalts were investigated.
分析测试了几种聚酯纤维的特性粘度、形貌与微观结构及其改性沥青的软化点、针入度、延度和针入度指数。
The influence of high sulfur inferior crude oil such as reactor coking,asphalt softening temperature decrease,and sulfur corrosion were analysed.
通过分析近年来扬子石油化工股份有限公司炼油厂尤里卡装置加工进口高硫劣质原料油时存在的反应器结焦严重、沥青软化点降低、硫腐蚀等问题,提出以下解决措施:控制减压渣油的恩氏黏度在 600~750mm2 /s,裂解炉出口温度提高至 486±1℃,最大过热蒸汽注入量调整为 11~11。
The influences of various additive contents on material performance such as the softening temperature and the heat-proof time were studied and the best material formulation was determined eventually.
应用氯醋共聚树脂为主要原料,选用工业常规添加剂,按照配料→共混→挤出造粒→压延成型或注射成型的工艺流程进行改性、加工,研究了各种添加剂含量对材料软化点、耐热时间等性能的影响,最终确定最佳的材料配方。
The influence of different synthetic procedures of novolac on gelation speed and softing point was investigated.
研究了不同合成工艺对壳法用热塑性酚醛树脂聚合速度和软化点的影响。
Theresultsshow that the addition of the stabilizer can improve not only the softing point of the modified asphalt but also the compatibility between SBS and asphalt which can improve the storage stability.
结果表明:稳定剂的加入提高了SBS改性沥青的软化点;改善SBS和基质沥青的相容性,从而提高了改性沥青的热储存性能;并得出了稳定剂W和S的较佳剂量分别为0。
The curve of expansion versus temper- rature in the temperature elevating process is depicted automatically and the coefficients of mean lin- ear expansion, instantaneous thermo-expansion, transforming temperature and softing point can be printed according to the.
本文介绍了一种■全由计算机进行设定控制的热膨胀仪,可以对温度范围、升温速率、初始条件进行设定,并由计算机完成实时数据的采集及处理,完成升温过程中温度-伸长量曲线自动描绘,并根据用户要求自动打印出各温度段的平均线膨胀系数、瞬间热膨胀转变温度及软化点等,其结构准确可靠、使用方便、自动化程度高,达到国内领先水平。
Falter apparatus
福尔特软化点测定仪
glass-viscosity and viscometric fixed points-part 6:determination of softening point
玻璃软化点测定方法
glass having a relatively low softening point.
具有较低软化点的玻璃。
testing method for annealing point and strain point of glass by beam bending
玻璃退火点和软化点测定方法-压梁法
Investigation on Eureka pitch-softened-point measuring by artificial intelligent method
尤里卡沥青软化点人工智能软测量技术探索
testing method for softening under load of firebrick
耐火砖负载软化点试验方法
testing methods for softening point of epoxide resins
环氧树脂软化点的测定方法
testing method for softening point of bituminous materials (ring and ball method)
沥青软化点测定方法 环球法
Test method for softening point of petroleum bitumens
GB/T4507-1984石油沥青软化点测定法
ring-and-ball method
(用于测定沥青软化点) 环球试验法
testing method for vicat softening point of thermoplastics
热塑性塑料软化点 (维卡) 试验方法
The influence analysis of experimental condition to softening point of asphalt
沥青软化点测试的试验条件影响分析
Solid products of coal carbonization--Determination of softening point
GB/T2294-1997焦化固体类产品软化点测定方法
Determination of the softening point of hot-melt adhesives Ball and ring method
GB/T15332-1994热熔胶粘剂软化点的测定环球法
Binders for paints and varnishes--Determination of softening point--Ring-and-ball method
GB/T9284-1988色漆和清漆用漆基软化点的测定环球法
Epoxide resins-Determination of softening point-Ring and ball method
GB/T12007.6-1989环氧树脂软化点测定方法环球法
Test method for Vicat softening point of thermoplastics
GB/T1633-1979热塑性塑料软化点(维卡)试验方法
Study on Low Softening Point Shape Memory Polymer Material for Medical Fixing;
医疗固定用低软化点形状记忆聚合物研究
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号