Modeling of Semi-continuous Casting Process for 7050 Aluminum Alloy Ingot;
7050铝合金大铸锭半连续铸造过程数值模拟
5052 Alloy Ingot in Semi-continuous Casting;
5052合金铸锭半连续铸造工艺的研究
Study on the microstructure of AZ91D magnesium alloy by the near-liquidus semi-continuous casting;
近液相线半连续铸造AZ91D镁合金微观组织研究
A new process, liquidus semi continuous casting(LSC) to produce semi solid slurries of aluminum alloy, was presented.
提出了液相线半连续铸造制备铝合金半固态浆的新工艺 ,研究了液相线半连续铸造 70 75合金的微观组织及其在二次加热过程中的变化。
The topography of the surface defect,the phase and chemical composition,the microstructure,the grain and the impurity elements of hot rolled H68 copper alloy strip from semi continuous casting were analyzed.
针对半连续铸造的H68铜合金带材锭坯热轧时出现表面缺陷,通过分析缺陷的形貌、相及合金成分、组织及晶粒、夹杂及杂质元素,认为导致缺陷的主要原因是铸造产生皮下气孔,热轧时氧化,无法通过压力加工焊合,造成应力集中,形成表面缺陷;次要原因是铸造的夹杂和杂质元素热轧时暴露,由于和基体的变形不协调,形成裂纹。
The semi solid ZL101A alloy billet with non dendritic structure was prepared by direct chill cast combined with electromagnetic stirring method (EMS DC method).
在优化各工艺参数的基础上 ,形成了半固态ZL1 0 1A合金的水平半连续铸造中试生产技术 ,其连铸坯铸态和热处理态强塑性综合指标分别为 430 。
cable semicontinuous casting machine
钢丝绳半连续铸造机
Evolution of the Semi-Solid Microstructures of 7075 Aluminum Alloy Cast by LSC
液相线半连续铸造7075铝合金半固态组织演变
Effect of Casting Process Parameters on Quality of 7050 Aluminum Alloy Slab by Semi-Continuous Casting
铸造参数对半连续铸造7050铝合金板坯质量的影响
As-cast Microstructures of 356 Aluminum Alloy Cast by LSC
356铝合金液相线半连续铸造组织的研究
Technique and Theory of Semi-continuous Casting of Aluminum Alloys under Low-frequency Electromagnetic Field;
低频电磁半连续铸造铝合金工艺及理论研究
Research on Electromagnetic Semi-continuous Casting of 7050 Aluminium Alloy Slab;
7050铝合金板坯电磁半连续铸造技术研究
Study on Monitoring Network System of Aluminium Alloy Semi-Continuous Casting
铝合金半连续铸造生产监控网络系统研究
Design and Research on Compound Magnetic Field Control System of Aluminum Alloy Electromagnetic Semi-continuous Casting
铝合金半连续铸造复合电磁场控制系统的研究
Study on the microstructure of Al-Mg-Si-Cu alloy semi-continuously cast near liquidus
Al-Mg-Si-Cu合金近液相线半连续铸造组织研究
Melting zone temperature distribution during semi-continuous casting of an aluminum alloy
铝合金半连续铸造过程中的液穴温度分布
Multi-scale Simulation of Microstructural Evolution in Semi-continuous Casting and Semi-solid Alloy Design
半连续铸造组织的多尺度模拟及半固态合金设计
Improvement of Surface Quality of Round Al Alloy Billets Cast by Semi-continuous Horizontal Process
铝及铝合金水平半连续铸造圆锭表面质量的改善
Study on Continuous Casting of Aluminum Alloys under Low-frequency Electromagnetic Field;
低频电磁场作用下铝合金半连续铸造工艺与理论研究
Design and Research on Compound Magnetic Field Intelligent Controller of Aluminum Alloy Low Frequency Electromagnetic Semi-continuous Casting;
铝电磁半连续铸造智能复合磁场控制器的研究与设计
Design and Research on Compound Magnetic Field Control System of Aluminum Alloy Low Frequency Electromagnetic Semi-continuous Casting;
铝合金低频半连续铸造复合磁场控制系统设计与研究
Effect of Different Electromagnetic Field Application Ways on Microstructures and Mechanical Properties of Semi-Continuous Cast Magnesium Alloy Billets
电磁场施加方式对半连续铸造镁合金锭坯组织与性能的影响
Effect of Ultrasonic Power on Grain Refinement in Semi-continuous Casting of 7050 Aluminum Alloy
超声功率对半连续铸造7050铝合金晶粒细化的影响
The Stability Analysis for the Frame of the Aluminum Ingots Continuous Casting Machine;
铝锭连续铸造机支承件的稳定性分析
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号