high temperature sintering是什么意思

网络释义

用法例句

The post-processing of indirect SLS includes debinding, pre-sintering, high temperature sintering and metal infiltration.

间接法选择性激光烧结技术制备金属件的后处理工艺包括脱脂、预烧结、高温烧结以及渗金属。

WC dispersion strengthened copper (DSC) was prepared by mechanical alloying (MA) in combination with high temperature sintering.

利用机械合金化与高温烧结方法制备WC弥散强化铜材料 ,研究了高温烧结温度和烧结时间对复合材料组织和性能的影响。

Formation and influential factors of high temperature sintering in titanium sponge production by magnesium reduction method were analyzed.

论述了镁法海绵钛生产过程中高温烧结的形成及其影响因素,分析了减少高温烧结的控制措施。

The hydroxyapatite coatings on the Ti6Al4V alloy are obtained by electrophoretic deposition process that contained the following steps-preparation of bioceramic suspension, electrophoretic deposition and high-temperature sintering.

经过制备稳定的悬浮液、电泳沉积、高温烧结等过程 ,在 Ti6 Al4 V合金上得到表面均匀的羟基磷灰石生物陶瓷涂层 。

The results show that WCu10 contact materials manufactured by vacuum high-temperature sintering and infiltrating process have excellent properties and uniform and dense microstructu.

结果表明,用真空高温烧结及真空熔渗工艺制备出的WCu10触头材料具有良好的综合性能,其组织均匀、致密,氧、氮含量极低,符合真空开关的使用条件,并通过了真空负荷开关的型式试验。

Aimed at preventing locally over-heating due to high-speed temperature raising in high-temperature sintering,the auto-control system for this kind of microwave oven is designed.

为了防止微波高温烧结过程中,升温十分迅速,发生局部过烧,用单片机设计高温烧结微波炉的自动控制系统。

Al_2O_3/Ti_xAl_y composite was produced by sintering TiO_2/Al bulk,which wasmade by squeeze casting.

采用挤压铸造法,先制备 TiO_2/Al 坯块,经随后高温烧结反应,可生成 Al_2O_3/Ti_xAl_y 复合材料。

The compositions and function requirements of heat engineering automatic control system of high temperature sintering furnace for ceramic tools are analyzed.

分析了陶瓷刀具高温烧结窑热工自动控制系统的构成和功能要求 ,介绍了系统各组成部分的设计方案及控制特

RESEARCH ON HIGH TEMPERATURE SINTERING BEHAVIOR OF CaO SORBENT USED IN MULTI-CYCLIC CO_2 CAPTURING

CaO碳化-煅烧循环捕获CO_2高温烧结特性研究

Made of shaping Polytetrafluoethylene Resin by moulding in ordinary lemperature then through high heat sintering.

将聚四氟乙烯烧树脂在常温下用模压法成型后再经高温烧结制成。

Study of Hollow Cathode Dischage Using in Speedy High Temperature Sintering Process;

空心阴极等离子快速高温烧结工艺研究

Analysis and Control of High Temperature Sintering in Titanium Sponge Production by Magnesium Reduction Method

镁法海绵钛生产中高温烧结的分析与控制

Preparation and sintering microstructure of nanometer Fe coated Si_3N_4 composite powders

纳米Fe包覆Si_3N_4的制备及其高温烧结微观组织

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用模压法成型后再经高温烧结制成。

Study on the Sintering of cBN-AlN Composites at the HPHT;

cBN-AlN的高温高压烧结研究

Study on the Low-temperature Sintering of High-permeability NiZn Ferrites;

高磁导率NiZn铁氧体的低温烧结研究

Self-propagating High-temperature Synthesis and Sinetering of ZrB_2 ceramic;

ZrB_2陶瓷的自蔓延高温合成与烧结

The Relation between the Microstructure of Sinter Ore with High Basicity and Reduction Disintegration

高碱度烧结矿显微结构与低温还原粉化的关系

New Ultra-high Permittivity High Frequency Heat-Stable Medium-Temperature Sintering Ceramic Material;

新型超高介高频热稳定中温烧结瓷料研究

Preparation of High-purity High-density Alumina Ceramics with Low Temperature Sintering;

高纯高致密氧化铝陶瓷低温常压烧结研究

Research on Mechanism of Interaction Between Sinter and Lump Ores in Blast Furnace

高炉内烧结矿与块矿高温交互反应机理的研究

Sintering at high pressure and high temperature and characterization of nanometer B_6O-B_4C superhard composite

纳米B_6O-B_4C超硬复合材料的高温高压烧结与表征

The experimental results of low temperature ablator (beeswax and camphor) tests in the hypersonic wind Tunnel are presented in this paper.

本文给出了低温烧蚀材料的高超声速风洞烧蚀实验研究的结果。

High Temperature Microwave Heating Furnace & Microwave Sintering of Typical Ceramics;

微波高温加热系统及典型陶瓷的微波烧结

Research on Direct Laser Metal Sintering of Nickel-based Metal Powder Material;

直接激光烧结镍基高温合金的工艺研究

The Research of Combustion Technology of Preventing from Slagging and High-temperature Corrosion in 100MW Generating Unit Boiler;

100MW机组锅炉防结渣及高温腐蚀燃烧技术的研究