depth-to-width ratio是什么意思

网络释义

用法例句

Based on the research of real-time measuring the weld pool width with a dual wavelength optical filter,a fuzzy control system of welding pool width has been developed.

在双波长滤光片正面实时检测焊缝熔宽技术的基础上建立了焊缝熔宽模糊控制系统。

Weld-shape(butt weld width,size of fillet weld)is an indicator of weld features and it also is an important factor of quality welding.

焊缝尺寸 (如对接焊缝的焊缝宽度、角焊缝的焊角尺寸等 )是表示焊缝形状特征的指标 ,是影响焊缝质量的重要因素之一。

5) , weld width (H/c=0.

5 )、焊缝宽度 (H/c =0 。

In addition,the changes of the laser pulse width and pulse frequency to affect the weld width were investigated.

此外,对激光脉冲宽度及脉冲频率对焊缝宽度的影响作了深入研究。

Experimental results show that the acoustic emission technique can effectively detect heavy weld active flaws and the accurate size and location of flaws can be measured by the ultrasonic phased array technique.

试验结果表明,声发射能够有效检出深环焊缝中存在的活性缺陷,超声相控阵技术能实现活性埋藏缺陷的精确定位和测量。

Laser welding volume energy and its influence on weld penetration in laser deep penetration welding;

激光焊接体能量及其对激光深熔焊缝熔深的影响

Activating TIG welding (A - TIG) can greatly improve the weld penetration and thus enhance the process efficiency in comparison with the conventional TIG welding.

活性化TIG焊(A-TIG),同常规TIG焊相比可大幅度地提高焊缝熔深,从而提高焊接效率。

The article analysed and described in detail the TOFD technology for thick-wall weld of thermal walled-hydrogenation reactors,and has a certain guiding significance.

热壁加氢反应器是一种具有复杂结构的设备 ,本文对热壁加氢反应器深厚焊缝的TOFD检测技术进行分析和探讨 ,具有一定的指导意

Study on the On-line Test Technology of Weld Width in Metal Bellows;

金属膜盒焊缝宽度在线检测技术研究

Image Edge Processing Method of Radiographic Testing for the Width Measurement of Micro Weld

用于微焊缝宽度测量的射线检测图像边缘处理方法

And the weld width decrease with welding speed being increased.

而焊接速度的增大,焊缝正面和背面的熔宽明显减小。

The spcimens were machined such that plug weld was centered on the width of the specimen.

对试件进行了机加工以使塞焊焊缝位于试件宽度中间。

With fine ability to clear off oxidation film, The width of clearing film can be adjusted continuously to make out good-looking welding seam.

超强清理氧化膜能力，清理宽度连续可调，焊缝光亮美观。

slot length and width of bubble cap

泡罩齿缝长度与宽度

Indicates concave, convex or flush welds. Increase height to fit above other weld symbol.

指示凹焊缝、凸焊缝或平焊。增加高度以配合其他焊接符号。

Regression and Analysis on Metal Strength of Welding Seam of Welding Core Wine

药芯焊丝焊缝金属强度的回归与分析

Study of Length Calculation of Three Side Welded Lap;

三面围焊搭接角焊缝长度计算的探讨

The width of the seam allowance used determines the width of the welt.

留出缝份,缝份的宽度根据贴边的宽度而定。

The width varies depending on the area where the seam is desired.

缝份的宽度按所需缝线的部位而定。

As for welding seams of the same heat treatment state, the hardness of welding seam area depends on different welding wires.

对于同一种热处理状态的焊缝,焊缝区的硬度取决于不同的焊丝。

Transfer Behavior Study in Weld Thickness Direction of the Welding Plastic Metal in Friction Stir Welding

搅拌摩擦焊焊缝塑性金属在焊缝厚度方向的迁移行为研究

"Where thickness characteristics at the joint are more important than strength, a thinner welder is possible at reduced joint strength. "

如果焊缝的厚度比强度更重要,则在降低强度条件下可使焊缝更

Welding Procedure and Welded Seam Tracking and Pool Width Control for Copper-clad Aluminum Cable Billet in TIG High-Speed Welding;

铜包铝线坯高速TIG焊工艺与焊缝跟踪及熔宽控制

The Temperature Control System in HF Spiral Pipe Mill

高频螺旋焊管焊缝温度的闭环控制系统

The Modelling of Temperature Control by Speed in HF Welding Pipe Process and its Temperature Control System

高频直缝焊管焊接速度控温建模及控温系统

Path Planning of Six Multi-joints Robots for Line Welding

六自由度机器人在焊缝焊接应用中的路径规划