suction casting是什么意思

网络释义

用法例句

Realization of Fuzzy-PID in PLC for Low Pressure Casting Control System;

低压铸造控制系统中模糊PID在PLC中的实现

Effects of Processing Parameters on Filling Behavior of Thin-walled Casting in Low Pressure Casting;

工艺参数对低压铸造薄壁件充型能力的影响

Aluminum Alloy Motor Enclosure in Low Pressure Casting;

电动机机座低压铸造工艺

Application of Advanced Squeezing Casting to Aluminum Alloy;

铝合金挤压铸造的工程实践

Application of JSCAST Software to Squeezing Casting;

铸造模拟软件JSCAST在挤压铸造中的应用

Microstructure and Mechanical Properties of BH22 Piston Alloy in Squeezing Casting;

挤压铸造BH122活塞合金的显微组织与力学性能

Mechanical properties and wear performance of squeeze casting ZA27 alloy;

挤压铸造ZA27合金的力学性能及摩擦磨损性能

Effect of heat treatment on microstructure and properties of TiB_(2P)/6061Al composites fabricated by squeeze casting;

热处理对挤压铸造TiB_(2P)/6061Al复合材料组织与性能的影响

Ambient mechanical properties of TiB_(2P)/Al composites by squeeze casting;

挤压铸造TiB_(2P)/Al复合材料室温力学性能

Numerical simulation on filling and solidification process of low-pressure casting;

低压铸造充型与凝固过程数值模拟

Based on the requirements of low-pressure casting production,the plaster mould manufacture and drying technology,alloy melting and pouring technology were researched to provide science basis for the production of shell blade and heavy shell aluminum alloy castings.

基于低压铸造生产要求,对石膏型制备与烘干工艺、合金熔炼与浇注工艺进行研究,旨在为薄壁叶片和大型复杂薄壁铸造铝合金铸件的生产提供科学依据。

According to the theory of low-pressure casting,the technical parameters of the gating system were ascertained.

基于低压铸造的基础理论,确定出了低压铸造浇注工艺参数,并根据低压铸造工艺设计流程,以Windows 2000和AutoCAD作为支撑软件和系统平台,采用Visual C++等软件作为开发工具,成功开发了低压铸造加压规范的程序,并绘制了加压工艺规范曲线;同时,在低压铸造工艺设计中进行了浇注系统模块的开发。

Numerical Simulation of Filling and Solidification Process for Casting by Low-Pressure Casting;

低压铸造铸件充型凝固过程数值模拟

CAD System for Cylindric Magnesium Alloy Casting by Low Pressure Casting Process;

圆筒型镁合金铸件低压铸造工艺CAD

The Experimentation Study of the Low-pressure Foundry Techniques of the Hull Castings;

壳体类铸件的低压铸造工艺试验研究

Application of low pressure casting in Al-Si shell casting parts

低压铸造在铝硅壳体类铸件中的应用

Simulation of Casting Stress of Low-pressure Casting Aluminum Alloy Wheel

低压铸造铝合金轮毂铸造应力的数值模拟

My factory technical force is abundant, specialized production each kind of casting: Low pressure casting, sand casting.

我厂技术力量雄厚，专业生产各种铸造：低压铸造、型铸造。

Process and Parameter of Round Multistory Al-casting in Low Pressure Casting

多台阶圆盘铝铸件低压铸造工艺及参数

Elimination of Shrinkage Porosity in Low Pressure Casting Large Castings with Varied Thickness

低压铸造大型壁厚不均铸件缩松的解决

Research on 4G1 Cylinder Cover Workability by Low Pressure Casting;

低压铸造4G1气缸盖加工性能的研究

Study on SiCp/A357 Composites and Low Pressure Casting Process

SiCp/A357复合材料及低压铸造工艺研究

Numerical Simulation of the Low Pressure Die Casting Process of Aluminum Alloy Wheel

铝合金轮毂低压铸造工艺的数值模拟

Low-pressure Casting of ZL205A Large Sophisticated Structural Component

ZL205A大型复杂结构件低压铸造技术

The Single Chip Microcomputer Control For Liquid Level Pressurization System of Low-pressure Casting

低压铸造液面加压系统的单片微机控制

Low Pressure Die Casting Molding Process Numerical Simulation of Shell of Tanks Used to High Voltage Switchgear;

高压开关罐体低压铸造成形过程的数值模拟

Non-linear Pressure Condition in Filling of Aluminum Alloy Wheel in Low Pressure Die Casting

铝合金轮毂低压铸造充型非线性压力条件

Research on Low Pressure Casting Die Manufacturing of Impeller of High-Speed Fan;

高速风扇叶轮低压铸造模具制造的研究

Optimization of Casting Technology and Studied Structure and Performance of Al Alloy Wheel by LDPC

低压铸造铝合金车轮铸造工艺优化以组织性能研究

Practical Algorithm for Time Step in Low Pressure Die Casting Solidification Simulation

低压铸造凝固模拟中时间步长的实用算法