The microstructure of Al-16Si alloy is refined after plasma remelting.
经等离子重熔的A1-16Si合金与电阻炉重熔的相比,组织有明显的细化效果:初晶Si最大长度由120μm变为10μm,共晶 Si最大长度由 75 μm变为 8 μm,并且这种细化效果随着放电电流和气流量的增大而增强,分析认为,造成组织细化的原因是由于等离子熔炼特殊的加热方式所致,等离子轰击作用能使熔体中保留遗传信息的原子团簇变小,微观结构更加均匀
In this paper, laser remelting and plasma remelting techniques w.
本文采用激光重熔、等离子重熔工艺对等离子喷涂涂层进行重熔处理,设计正交试验,得出激光重熔等离子喷涂涂层的最优参数为:功率600W、速度1。
So it is frontier for plasma beam cladding Fe-based alloy.
目前激光熔覆成为表面处理技术研究的热点之一,但对铁基合金研究甚少,因此研究等离子束熔覆铁基合金就具有前沿性。
plasma electron beam remelting
等离子 电子束重熔
Influence and Control of Electron Beam Remelting Coating on Crack
涂层电子束重熔对裂纹的影响及控制
EBFZM (Electron Beam Floating Zone Melting)
电子束悬浮区域熔炼
Study on Plasma Surface Melting and Al_2O_3/TiB_2 Coating of Magnesium Alloy
镁合金等离子束熔凝及Al_2O_3/TiB_2涂层研究
Study on the Alumina Ceramic Preparation by Plasma Jet Melting Method
等离子束熔融法制备氧化铝陶瓷研究
Experimental study on NiCrBSi multilayer coating cladded by micro-plasma arc cladding process
微束等离子多层熔覆NiCrBSi的试验研究
A Research on Focus Properties of Annular Electron Beam in Plasmas
等离子体对空心电子束聚束特性研究
ion plasma wave and ionic plasma oscillation
离子等离子体波和离子等离子体振荡
The Crystal and Amorphous Phase in Cladding Layer by Compressed Arc Plasma Beam
压缩弧光等离子束熔覆层中晶相与非晶相
Research on Melting and Pushing Technology with Plasma Welding in NiTi Shape Memory Alloy;
NiTi形状记忆合金等离子束熔压焊方法研究
Study on Crystallizing Procedure and HAZ by Plasma Beam Cladding;
等离子束熔覆结晶过程及热影响区的研究
Numerical Simulation of Temperature Field of Plasma Cladding Fe-base Alloy
等离子束熔覆铁基合金温度场的数值模拟
EFFECT OF ELECTRON BEAM RE-MELTING ON SURFACE MOTPHOLOGY AND PROPERTIES OF SILICIDE COATING
电子束重熔处理对硅化物涂层表面形貌和性能的影响
Study on Parameter Optimization and Corrosion Resistance of Laser/plasma Remelting Plasma-sprayed Ni-coated WC Coatings;
激光、等离子重熔等离子喷涂Ni包WC涂层参数优化与耐蚀性研究
trapped particle
(等离子)俘获粒子
stripped plasma
完全电离的等离子体
high ionized laser plasma
强电离激光等离子体
high flux electron beam and ion beam
强流电子束和离子束
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号