edging pass是什么意思

网络释义

用法例句

The effect of homogenization temperature and hot rolling pass change on the compound morphology of 3104 sheet used for can was studied The result shows that the compound in finished sheet made by 3104 alloy can stock homogenized at 580℃ for 15h and hot rolled in 3 pass were fully broken, evenly distributed and disperse

研究了均匀化温度、热轧道次改变对 3 10 4制罐板化合物形态的影响。

Various alclad、heating time、rolling pass、reduction is used in the test,and compared surface quality with rate of finished product after rolling.

本试验采用不同包铝方式,不同加热时间,不同轧制道次和道次压下量的安排进行研究。

In virtue of off-line simulation and calculation, not only the ability of accommodating water in each pass can be designed but also the relationship between quantity of water and finished temperature can be known.

通过离线模拟可以设计精轧道次的供水能力,同时了解冷却水量对终轧温度的影响。

Reduction Pass Rolling in TM Finishing Mill Train of Laiwu Steel's Large H-beam Product Line

莱钢大H型钢生产线TM精轧机组减道次轧制

Study on Semi Steel Precision Roll after Crude Roll Pass and Second Heating Treatment

粗开孔型二次热处理精轧半钢轧辊的研制

FEM simulation of hot rolling process in the second pass considering dynamic recrystallization in the first pass

考虑一道次动态再结晶的二道次热轧仿真

FEM Simulation of Second Hot Rolling Considering Microstructure Evolution during First Pass and Time Interval

考虑一道次及道次间隔期间组织演变的二道次热轧仿真研究

The results show that the bonding is good when the temperature, two passes deformation ratio of rolling are1250℃,50% respec tively.

结果表明：轧制温度为1250℃两道次的轧制变形率为50％，界面结合较好。

FEM Simulation and Optimization of Six Pass Cool Continuous Rolling Process of Wire and Bar Stainless Steel;

不锈钢线棒材六道次冷连轧轧制过程有限元仿真与优化

Finishing Mill Transitional Roll Table Side Guide Plate Slipping System Transformation

精轧机组中间辊道侧挡板滑移系统改造

Simulation of Mutli-Pass Hot Rolling Plate by a Mixed Analytic -Numerical Method;

中厚板多道次热轧过程的复合解析数值法模拟

Finite Element Simulation of Multi-Pass Reversing Hot Rolling for High Temperature Alloy

高温合金钢板多道次可逆热轧的有限元模拟

FE simulation of multi-pass reversible hot rolling of GH4169 alloy plate

高温合金GH4169多道次可逆热轧的有限元模拟

Continuous Finite Element Simulation of Plate Multi-pass Hot Rolling

中厚板多道次热轧过程有限元连续模拟

As part of the current project, Siemens is resupplying the drives for the roughing mill and sections of the finishing mill.

作为当前项目的一部分，西门子再次为粗扎机和精轧机提供驱动。

High-Precision Rolling Force Prediction Model for Hot Strip Continuous Rolling Process

热轧带钢精轧过程高精度轧制力预测模型

FEM Simulation on the Two-pass Continuous Cold Rolling of Oval Profile 304 Stainless Steel Wire;

304不锈钢线材椭圆孔型两道次冷连轧有限元模拟

Effect of dysprosium on shape of β phase,homogenization treatment time and maximum reduction per rolling pass of AZ31 alloy

镝对AZ31合金β相形状、均质化处理时间及单道次最大轧制率的影响

triangular finishing pass

(Y形轧机的)三角精轧孔型

Selection on Dust Plan of AISC 1780 Hot Finished-rolling Mill

鞍钢1780热轧精轧机除尘方案的选择