continuous tapping是什么意思

网络释义

用法例句

In this paper,some manufacture methods of microcellular foam plastics including the polymerization of monomers,phase separation,percipitation with a compressed fluid antisolvent,batch microcellular foaming,continuous extrusion,injection molding are introduced respectively.

介绍了微孔塑料的几种制备方法,包括单体聚合法、(热引导)相分离法、压缩流体反溶剂沉淀法、间歇成型法、连续挤出法和注射成型法,分析并比较了各种制备方法的特点及应用,展望了微孔塑料光明的发展前景。

Punching plunger extrusion is a novel continuous extrusion molding technology, which provided higher processing capacity, better appearance and quality of the extrudate, compared with single-screw extrusion.

超高相对分子质量聚乙烯(PE-UHMW)管材连续挤出成型法有压制-烧结、柱塞推压、单螺杆挤出、双螺杆挤出和柱塞冲压挤出等几种,其中柱塞冲压挤出成型法是新开发的一种PE-UHMW管材连续挤出成型技术,该技术的突出优点表现在:能加工任意相对分子质量的PE-UHMW树脂,加工能力强;能实现连续挤出,生产效率不低于单螺杆挤出法,而制品的表面质量、力学性能(如耐磨性)则优于单螺杆挤出法;完全正位移输送机理,温度控制简单可靠(控温段只有三个),因此加工过程中的降解程度较小,能很好地保持原料固有的优良性能;主机结构简单,能耗低 (约为螺杆挤出法的30％-50％),生产线造价便宜。

The influencing factors and technical problems of continuous extrusion of microcellular plastic foams are explained.

阐述了塑料微孔发泡连续挤出成型中的众多技术难点和影响因素。

The Key to handle defects existing in the production of melamine under normal pressure in batches,lies in causing contineous discharge of products from the collector.

要使间歇式生产变为连续生产，关键是解决连续出料问题。

Study on Theory and Equipment for Extrusion Microcellular Foaming Formation;

微孔塑料连续挤出的机理研究及装备

Continuous Extrusion Foaming of Polypropylene/ Polydimethylsiloxane Blend

PP/PDMS共混物的连续挤出发泡成型

Study of Mechanism of Straw's Continuous Steam Explosion in Extruder

秸秆连续挤出蒸汽爆破处理的机理研究

This production line is applicable to the continuous extruding of PVC door plate, clapboard^ elbow board and floorboard.

该生产线主要用于PVC整体门板、板、体材料及窗台板、板的连续挤出。

Study on Modification of UHMWPE and Processing Sheet by Twin Screw Extruder;

对超高分子量聚乙烯改性及实施双螺杆连续挤出板材成型技术的优化研究

Continuous Curing Production Line for Extruding EPDM Water-Proof sheet

三元乙丙橡胶防水片材挤出连续硫化生产线

Study on Lateral Compression Pressing of Tin Bronze for Continuous Extrusion

基于连续挤压的锡青铜侧向挤压研究

EFFECT OF CONTINUOUS SCREW REAMER PARAMETERS ON PUG CHARACTERISTICS OF EXTRUSION PROCESS

连续螺旋绞刀参数对挤出过程中泥料特性的影响

Contrast analysis of extending forming between continuous extrusion and forward extrusion

连续挤压与正挤压在扩展成形中的对比分析

Heat treatment of steel for extrusion wheel of CONFORM clad machine

连续挤压成型包覆机挤压轮用钢的热处理工艺

output register

(连续)输出寄存器

The Study of PLC Control System in 400 Continuous Extrusion Machine;

400型连续挤压机的PLC控制系统研究

Analysis of Main Axis System of TLJ400 Continuous Extrusion Machine;

TLJ400型连续挤压机主轴系统研究

Intensity Analysis and Calculation of the Principle Shaft System Parts of Continuous Extrusion Machine;

连续挤压机主轴部件强度分析与计算

The Numerical Simulation for Continuous Extrusion Cladding (CONCLAD) Process;

连续挤压包覆（CONCLAD）过程的数值模拟

Lightweight Design for the Frame of TLJ400 Continuous Extrusion Machine

TLJ400连续挤压机机架的轻量化设计

Study of Continuous Extrusion for Brass HPb59-1

铅黄铜HPb59-1连续挤压工艺的研究

Experimentation optimization of technological parameters of extrusion die in the continuous extrusion process

连续挤压过程中模具寿命的优化研究