welding stress是什么意思

网络释义

用法例句

his paper introduced the melting graft reaction of low density polyethylene (LDPE) and diallyl bisphenol A ether (DBAE) using dicumyl peroxide (DCP) as initiator in the mixer of Haake rheometer.

介绍了烯基双酚Ａ醚（ＤＢＡＥ）在引发剂过氧化二异丙苯（ＤＣＰ）存在下，与低密度聚乙烯（ＬＤＰＥ）在Ｈａａｋｅ转矩流变仪的混炼器中进行熔融接枝反应的工艺。

This paper provides a new method for making metal matrix composites,namely directed reaction of molten metal.

介绍了一种新型金属基复合材料制备工艺——熔体直接反应合成工艺,重点介绍了Al_3Ti/Al、TiB/Al、TiC/Al颗粒增强复合材料制备工艺及其性能。

The TiB2/Al composites were fabricated by direct reaction method at different initial reaction temperatures,and the remelting process was carried on.

用熔体直接反应法在不同起始反应温度下制备了TiB2/Al复合材料,并进行了重熔处理,用光学显微镜、扫描电镜、透射电镜等对复合材料的组织和力学性能进行了测试分析,并探讨了熔体中的反应机制。

Calculation of Interface Width and Contact Stress of Spinning Top Roller and Roller;

细纱胶辊与罗拉接触面宽度和接触应力的计算

The calculation of contact stress of rock bit floating ring journal bearing under disalignment;

不对正情况下牙轮钻头浮动套轴承接触应力计算

Numerical simulated analysis of the contact stress on the sealing rubber of the packer;

封隔器胶筒接触应力的数值模拟分析

Study on the Melt Graft-Reacting Extrution of PE or EPDM with MAH and the Alloying of PA Toughened by the Grafts;

MAH与PE或EPDM熔融接枝反应挤出和挤出物增韧PA合金化的研究

Preparation and rheology behavior study of blocked isocyanate melt grafting poly(ethylene octene)

乙烯—辛烯共聚物熔融反应接枝封闭型异氰酸酯的制备与性能研究

Study on the Reaction of SEBS Melted-grafting MAH and Its Graft Mechanics;

SEBS熔融接枝马来酸酐及其接枝机理研究

Structure and Properties of Melt Grafted LLDPE-g-GMA

熔融接枝制备LLDPE-g-GMA及其性能

Study on MMA/St Bi-monomer Melt Grafting POE

双单体MMA/St熔融接枝POE的研究

Grating of ε-Caprolactone onto Polypropene via Bulk-Melting/Surface Initiated Polymerization;

聚丙烯本体熔融/表面接枝聚已内酯的研究

Study on the Properties of In-situ Melting Copolymerization Grafted Starch/PLA Biodegradable Material

原位熔融接枝淀粉/PLA生物可降解材料性能研究

EVA Flame-Retardant Composites Toughened by EVA-g-MAH

马来酸酐熔融接枝EVA增韧EVA阻燃复合材料

Study on melt grafting reation of MAH with impact copolymerization PP and its blending with PC/ICPP

MAH熔融接枝共聚PP对PC/ICPP合金的影响研究

Research on Grafting Maleic Anhydride onto Polyolefin with Melt Extrusion

聚烯烃熔融挤出接枝马来酸酐的研究进展

Preparation of Nylon 6 with High Viscosity by Chain-extension during Melting Extrusion

熔融挤出扩链反应制备高粘度尼龙6

Research on Gasification Reaction of Coal With CO_2 Catalyzed by Molten Salts

熔融盐催化煤与CO_2气化反应研究

Reaserch on gasification of anthracite coal catalyzed by molten salts

无烟煤熔融盐催化气化反应特性研究

Study of Compatibilization of PP g DBM on PP/PA6 Blend

聚丙烯熔融接枝马来酸二丁酯增容聚丙烯/尼龙6的研究

Study on Double-monomer Melt Grafting PP Compatibilizes PVC/PP Blends;

双单体熔融接枝PP的制备及其增容PVC/PP共混物的研究

Study on Maleic Anhydride Melt-grafted Ethylene Vinyl Acetate Copolymer and Its Entoughness in Modified Nylon 66 Blends;

EVA熔融接枝马来酸酐及其增韧尼龙66改性体系的研究

Improving the Compatibility and Flammability of an Intumescent Flame-Retardant Polypropylene System Through Melt-Grafting

熔融接枝法提高膨胀型阻燃聚丙烯的相容性和阻燃性能

Melt Grafting of Glycidyl Methacrylate and Multi-monomer Styrene onto Polypropylene Powder

甲基丙烯酸缩水甘油酯-苯乙烯多单体熔融接枝粉末聚丙烯