stretch bending是什么意思

网络释义

用法例句

Theoretical Investigation into Continuous Tension Leveling Process of Metal Strip (2) --Analysis on the tension leveling process of elastic-perfect plastic metal strip over the first bending roll;

金属带材拉伸弯曲矫直过程简化解析分析之二─—理想弹塑性带材在第1个弯曲辊上的拉弯过程分析

This paper expounds the characteristics of tension leveling and application in copper fabricating industry,and studies the selection and optimization for the main technological parameters.

本文论述了拉伸弯曲矫直技术的特点及其在铜加工领域的应用,同时探讨了相关工艺参数的选取和优化等问题。

In this paper, the method to calculate the energy consumption and variation of tension during tension leveling of metal strips is investigated and formulae for the elastic-perfect material are suggested which are useful for the design of a continuous tension leveler.

了解带材拉伸弯曲时的弯曲能耗和张力变化是合理设计拉伸弯曲矫直机的基础 。

The paper analyzes the interaction between woven fabric and needle in the integrated piercing process of orthogonal laminated woven fabrics, proposes and establishes fiber bending elongation and elongation breakage model,and talks over the structure parameters influencing fiber bending elongation.

分析了正交叠层机织布整体穿刺工艺机织布与钢针的相互作用 ,提出并建立了纤维的弯曲伸长及伸长断裂模式 ,讨论了影响纤维弯曲伸长的结构参数。

This paper analyses the spring back of car's middle sliding rail on stretch bending.

分析了用拉伸弯曲法成形面包汽车中导轨零件时的尺寸和角度回弹 ,推导出了此类制品成形模具半径和角度的计算方

Multi-rigid-body Dynamic Simulation of the Bending Roller Unit of Direct-driving Stretcher Leveller

直接传动型拉伸弯曲矫直机弯曲辊系多刚体动力学仿真研究

The Accident Analysis and Transformation Study on the Stretcher Straightener;

拉伸弯曲矫正机设备故障分析及改造研究

The strip deformation of simulation model established in tension levelling

带材拉伸弯曲矫直变形仿真模型的建立

Application of Profibus Technology in Tension-Bending Straightening Machine

Profibus控制技术在拉伸弯曲矫直机组中的应用

The Research on Strip of Tension Leveling Theory and Simulation Based on Improved the Shape;

基于改善板形的带材拉伸弯曲矫直理论研究及其仿真

Study on Aided-Design of the Tension Leveling of Metal Strip and Its Control Simulation;

拉伸弯曲矫直机辅助设计与控制仿真系统的研究与开发

Study on Process Parameter for the Tension Leveling of Metal Strip with the Finite Element Method;

基于有限元方法的金属带材连续拉伸弯曲矫直工艺参数研究

The Tension leveller is used to improve strip shape and mechanical properties.

本机组采用拉伸弯曲矫直机的主要用途是改善镀锌带材板形及机械性能。

"The leveller consists of straightener, tension rolls and driving device, basement and speedy roll change device. "

拉伸弯曲矫直机由矫直机、张力辊及其传动装置、底座和快速换辊装置部分组成。

To release(a bow, for example)from flexure or tension.

伸直放开弯曲或拉紧的（如，弓）

act of stretching or straightening out a flexed limb.

拉伸或矫正一个弯曲的肢体。

knee joint flexion and extension exerciser

膝关节弯曲伸长训练器

This series pressing machine can be widely used in the technologies of drilling, losing materials, cutting, bending, shaping and light extension etc.

本系列压力机可广泛应用于冲孔、落料、切断、弯曲、成形、浅拉伸等工艺。

The simulative results show that stress distribution under stretching with superimposed bending is more advantageous to the reduction of spring back.

计算结果表明，先弯曲再拉伸时应力分布规律更利于减小回弹。

Plasticity in the suppression techniques such as stamping, bending, flanging, such as tensile plate.

适用于可塑性的压制工艺，如冲压、弯曲、翻边、薄板拉伸等。

The results showed that the tensile strength, flexural strength and flexural modulus increased obviously with increase of amount of Mica.

结果表明,复合材料的拉伸强度、曲强度和弯曲模量随着云母用量的增加而提高。

Eular crippling stress

（纵向弯曲）欧拉临界应力

Profile design for stretch bending die of extrusions considering springback

考虑弯曲回弹的拉弯模外形设计方法