Effects of RE/V/Ti multi-modification on grain refinement of high silicon cast steel;
稀土、钒、钛变质处理对高硅铸钢晶粒细化的影响
Study on process of multi-element permeation on cast steel surface;
铸钢表面多元共渗工艺和性能研究
Application of cast-penetrating technology in the cast steel valve;
铸渗技术在铸钢阀门上的应用
An Analysis on Abnormal Fracture of 12CrNi2MnCu Casting Steel;
12CrNi2MnCu铸钢异常断口分析
The conchoidal fracture in casting steel was studied by means of instrumented impact test, facture analysis and metallographic examination.
采用示波冲击试验、断口分析和金相分析等方法,并结合断裂力学对铸钢中贝壳状断口的形成机理进行了研究。
The microstructure and mechanical properties of the chain guide frame made of imported and home made materials as well as products meta bainited casting steel were investigated by mears of optical microscop (OM)?X ray phase analysis, scanning electron microscopy (SEM) and mechanical testing.
用金相分析、X射线衍射、扫描电镜及力学性能测试分析了进口、国产及准贝氏体铸钢链轨架材质的组织及力学性能。
The Application of Electric Arc Heating Top in Steel Casting Roll Production;
电弧加热冒口(EAHT)在铸钢轧辊生产中的应用
In this paper,the influence of various parameters on suspension shearing dry strength and permeability of EPC coating used on steel casting through right angle test was studied.
通过正交试验 ,研究了各因素对真空实型铸造铸钢件涂料的透气性、干强度、剪切力、悬浮性的影响。
A flexible software with versatile functions was presented,which can be used conveniently in the design of the steel casting process.
开发了具有功能全面、使用方便、适用面广等特点的铸钢件铸造工艺计算机辅助设计软件。
Aiming at the phenomenon that there occur fatigue cracks in the cast-steel axial suspending tubes on locomotives,and in order to find out the reasons that cause the cracks,the axial suspending tubes were investigated and analyzed.
针对机车铸钢抱轴箱在运行中产生疲劳裂纹的现象,笔者对机务段检修和返厂检修的抱轴箱进行了调研,认为裂纹长度服从正态分布。
Study on Joints, Spindle and Tower Structure of Cast Steel;
铸钢节点铸钢轴和铸钢塔结构的研究
Cast steel anchor chain cables
GB/T550-1984铸钢锚链
Cast steel rolls
GB1503-1989铸钢轧辊
Study on the Cluster of LFC in Cast Iron&Cast Steel for Small to Medium Casting Process;
铸铁铸钢中小件消失模铸造串铸工艺研究
Marine oval-shaped cast iron and cast steel pipe flanges
GB/T10750-1989船用扁圆形铸铁和铸钢法兰
The Development of CAD System for Sand Casting of Steel;
铸钢件砂型铸造模具参数CAD软件开发
Cast Technology of Cast-steel Shell Based on ProCAST
基于ProCAST的铸钢件壳体铸造工艺研究
SFSA (Steel Founder's Society of America)
美国铸钢工作者协会
Cast steel suction valve for seaward sluice
GB/T2029-1980铸钢吸入通海阀
Fracture analysis of ZG270-500 cast steel lifting instrument
ZG270-500铸钢吊具断裂分析
Most of the steel cast into finished shapes is medium carbon cast steel.
大部分浇铸成成品形状的钢是中碳铸钢。
Founding of Heavy Steel Castings-The Blooming Mill Housing Used for Ma Steel 2250mm hot mill
马钢热轧2250mm初轧机架大型铸钢件的铸造
The carbon content of mild steel is much lower than cast-steel.
软钢的含碳量要比铸钢的低得多。
Pump case are welded castings steel and steel plates.
泵壳是由铸钢与钢板焊接而成的。
Production practice on casting the round tube blank of steel 20 with round tube blank continuous caster
圆坯连铸机浇铸20钢铸坯的生产实践
The steel is then ready to be cast into different shapes and sizes.
钢将要被铸成不同形状和大小的铸件。
`Of - forged iron,' replied Passepartout, as he set about preparing a hasty breakfast.
“不是铁打的,是钢铸的
cast gutter spout of iron or steel
钢或铁制铸造水落管
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号