Structure and properties of spray layer made by different quantities of self-fluxed alloy powder are studied.
采用铝热自蔓延高温合成法在钢板表面进行喷焊,研究不同用量自熔性合金粉末所制得的喷焊层的组织及性能,分析了合金元素对基体组织和性能的影响。
Abrasion wear resistance test of coatings was carried out by using hardened steel45 as an abrasion wear taster Oil the coatings of typical China--made self fluxing alloyed composite powders.
用几种国产自熔合金粉末制备喷熔层与45淬火钢配对构成摩擦副,进行摩擦磨损试验,以相对磨损量评价喷熔层的摩擦磨损性能。
The Ni-based self-fluxing alloy powder coposite coating was produced on the substrate of ferrite and pearite base gray iron by the general electrical resistance furnace with graphite protection successfully.
用普通电阻炉加石墨保护的方法成功地在铁素体基灰铸铁及珠光体基灰铸铁基体上制备了镍基自熔性合金粉末复合材料。
Research on the Preparition of Ni-based Self-fluxing Alloy Powder and the Performance of Anti-corruption of the Coating of It;
镍基自熔性合金粉末的制备及其涂层耐蚀性能的研究
Study on Laser Cladding of Ni60 Alloy Coating on AZ31B Magnesium Alloy
AZ31B镁合金表面激光熔覆Ni60合金粉末组织及性能
Nickel-Based Alloy Powder Welding Properties of Laser Cladding
镍基合金粉末的激光熔覆焊接性能研究
Friction and wear properties of laser melt-cladding with high-aluminum bronze powders
高铝铜合金粉末激光熔覆层的摩擦磨损性能
Self-fluxing alloy powders--Determination of solidus-liquidus temperature range
GB/T6526-1986自熔合金粉末固-液相线温度区间的测定方法
refractory metals made by powder metallurgy
粉末冶金难熔金属材料
The adaptability of free - spraying alloy powder made by oneself on induction remelting process was investigated.
研究了自制免喷涂合金粉末对感应重熔方法的适应性,以及重熔工艺参数对重熔层组织状态的影响。
Study on Characteristics of Fe Based Alloy Coating Prepared by Laser Cladding on High-temperature Forging Mould
高温锻压模具表面激光熔覆铁基合金粉末的特性研究
Study on Ni60A Alloy Powder Coating by Supersonic Frequency Induction Heating
超音频感应熔覆Ni60A合金粉末涂层的研究
Study of Laser Modification and Alloying of Ni-P Deposited Aluminum and Laser Cladding of Aluminum-based Powders on Magnesium Alloys;
铝基体Ni-P镀层的激光改性、合金化与铝基粉末材料的镁合金激光熔覆研究
Metallic powder material--Self-fluxing Fe-Cr-B-Si alloy powder
GB/T8549-1987Fe-Cr-B-Si系自熔合金粉
Metallic powder material--Self-fluxing Ni-B-Si alloy powder
GB/T5315-1985Ni-B-Si系自熔合金粉
Metallic powder material--Self-fluxing Ni-Cr-B-Si alloy powder
GB/T5316-1985Ni-Cr-B-Si系自熔合金粉
Influence of prealloyed powder on properties of powder metallurgy NiFe_(18.5)Al_(25) alloy
预合金粉对粉末冶金NiFe_(18.5)Al_(25)合金性能的影响
Fabricating Process and Properties of the Powder Metallurgy of High Aluminum Zn-based Alloy
粉末冶金高铝锌基合金的制备与性能
Preparation of Al-Mg Alloy by Powder Metallurgy Forming
Al-Mg合金粉末冶金成形性研究
Standard method for determination of particle size of powders of refractory metals and compounds--Fisher method
GB/T3249-1982难熔金属及化合物粉末粒度的测定方法费氏法
MICROSTRUCTURE AND MECHANICAL PROPERTIES OF IN-SITU SYNTHESIZED TITANIUM MATRIX COMPOSITES PREPARED BY POWDER METALLURGY
粉末冶金制备原位自生钛基复合材料的显微组织和力学性能研究
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号