By use of epoxy adhesive,the effects of stainless steel surface treatment methods on adhesion strength of stainless steel plate with aluminum honeycomb core sandwich structure were investigated by the contrast experiments of different surface treated technologies.
使用环氧树脂结构胶粘剂,通过未表面处理和5种不同的表面处理工艺的对比试验,研究了不锈钢表面处理方法对不锈钢/铝蜂窝夹层结构板胶接强度的影响。
The effects of the anodizing parameters on the adhesion were studied.
测试了铝合金试片表面预处理和阳极化后的性能,研究了阳极化工艺参数对接头胶接性能的影响,观察了磷酸阳极化处理后的铝合金试片的表面形貌和其与胶粘剂粘接时的粘接界面,分析了其粘接拉剪破坏的失效模式。
The adhesion property is measuring by chaning the force -applying way, The result shows that the force -applying way has a great influence on the adhesion property.
本文通过改变加压方式,测试对应的胶接性能,证明加压方式对胶接性能影响显著,以引起胶接行业的关注。
With the wide application of adhesive bonding structure of steel sheet and aluminum alloy sheet in automotive body,3D elastic-plastic finite element model is used to analyze the stress distribution in adhesive joints under tension and shear load,as well as the effect of aluminum alloy sheet thickness and adhesive layer thickness on it.
针对汽车车身中应用日益广泛的钢板与铝合金板胶接结构,通过三维弹塑性有限元模型,分析其在承受拉剪载荷时接头内的应力分布,以及铝合金板厚度和胶层厚度对应力分布的影响。
This paper also discusses the method of adhesive bonding and the reaction mechanism.
并对胶接方法和反应机理进行探讨。
Research Progress of Residual Stress in Metal Adhesive Joints;
金属胶接接头内应力研究新进展
The cracks of solid motor grain were repaired by means of the adhesive.
使用胶粘剂对固体发动机药柱裂纹实施修补,通过单向拉伸试验测定修补区域药柱的力学性能来验证修补的有效性,并使用高温加速老化预测药柱修补区域的贮存寿命;进行了发动机药柱结构完整性分析,比照试验数据和理论计算结果,证明胶接法可对发动机药柱裂纹实施有效修补。
In this paper, for the bonding between the sling screw-thread-based and composite hull basedon the underwater weapon composite, the bonding structure design, process design andleakproof technology between the load-bearing metal parts and composite hull are studied.
本文以水下兵器为背景，以某型号雷体吊耳螺纹座与复合材料壳体的胶接为研究对象，着重进行了金属承力件与复合材料壳体的胶接结构设计、工艺设计、胶接防渗技术的研究，并进行吊耳螺纹座拉力试验研究，最终获取了水下兵器用金属承力件与复合材料壳体连接形式的共性技术。
The experiment using co-curing and bonding methods to fabricate C/QY8911 composites is reported here,then the mechanical properties of those composites strengthened by J-116F were measured and analysed in this paper.
介绍了在碳/QY8911复合材料的某些特定叠层间及共固化结构界面用特种工艺手段加入J-116F胶粘剂对其胶接拉剪性能的改善。
This paper makes study on the defect of the typical honeycomb sandwich composite structure after the process of bonding.
针对变截面蜂窝夹层复合材料典型结构件在固化成型过程中出现缺陷的问题进行研究,并在原有的成型工艺基础上,对变形区域的材料特性及受力形式进行了分析,找出了在胶接过程中可能产生蜂窝位置滑移、造成局部结构变形的原因。
Formation process of bonding strength during wood gluing operation;
木材胶接时胶合强度的形成过程
Introduction is made to gluing know-how and the properties, features application range of conventional adhesives.
介绍了胶接修复原理及其常用胶粘剂的性能、特点和适用范
A substance that hardens to act as an adhesive;glue.
接合剂，接合胶一种用作胶合材料胶接剂的物质；接合胶
Study on influence of adhesive layer size on performance for single-lap bonding joint
胶层尺寸对单搭胶接接头性能的影响研究
Study on influence of part flaw of adhesive layer on load capacity of adhesive joints
胶层局部缺陷对胶接接头承载能力的影响研究
STRESS AND STIFFNESS ANALYSIS OF BI-ADHESIVE BONDED SINGLE-LAP JOINTS
混元胶接单搭接头的应力与刚度分析
Effect of curing procedure on the impact toughness of adhesively bonded joints
固化工艺对胶接接头冲击性能的影响
Effect of Recessed Bonding on Stress Distribution and Strength of Adhesively Bonded Joints
间隙连接对胶接接头应力分布和强度的影响
Elastic Stress Analysis of Single-Lap Adhesive-Bonded Joints
单搭接胶接接头弹性应力的二维分析方法
Influences of adherent thickness,temperature and velocity on strength of adhesively-bonded single-lap joints
板厚、温度和速度对单搭接胶接接头强度的影响
Study on Adhesive and Gluing Technology for High Moisture Content Wood;
高含水率木材用胶粘剂与胶接技术的研究
Effect of Acid and Alkali Treatment on the Adhesion Properties for the Soybean Protein Adhesive
酸碱处理对大豆胶黏剂胶接性能的影响
Quantitative Evaluation of Disbonding in Steel/Rubber Adhesive Bonding Structures by Using Lamb Waves
钢/橡胶胶接结构中脱粘缺陷的Lamb波定量检测
Mode Selection for Detecting Disbonding in Steel/Rubber Adhesive Bonding Structure by Using Lamb Wave
钢/橡胶胶接结构脱粘缺陷Lamb波检测的模式选择
Description of Bonding Mechanism of Starch-based API and Birch by FTIR and ESCA
淀粉基API胶黏剂与桦木胶接机理的表征
Adhesion Property of Dyeing Veneer with High Moisture Content and Fixation Veneer
湿固化胶粘接高含水率染色和固色桦木胶接性能探讨
Numerical Analysis on the Stress Distribution in Intermittent Adhesively Bonded Cleavage Joint
有间隙胶接劈裂接头应力分布的数值模拟
rubber hoses for welding, cutting and allied equipment
焊接、切割用橡胶软管
pin insulation (cement)
接线杆绝缘物（胶合物）
automatic glass gluing machine
自动玻璃胶水接合机
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号：浙ICP备2024058711号