trailing suction dredger是什么意思

网络释义

用法例句

Optimum Hopper Capacity Selection for TSHD Based on the Cost Calculation;

基于疏浚成本选择耙吸式挖泥船的最优仓容

To find the rule about the change of the mass center positions of a TSHD s draghead with time when working in different soil hardness of seabed under the function of swell compensator, a simulation model of TSHD is built based on a mathematical model, by using the software of ADAMS (Automated Dynamic Analysis of Mechanical Systems).

为研究耙吸式挖泥船(TSHD)在波浪补偿器作用下耙头质心位置在海床土壤硬度不同时随时间的变化规律,本文在建立波浪补偿器数学模型基础上,借助多体动力学仿真软件ADAMS,以某单耙TSHD为例,建立其疏浚过程动力学仿真模型。

Design study on large car-type system of cutter suction dredger;

大型绞吸式挖泥船台车系统的设计研究

Dynamic behavior and simulation system design of a cutter suction dredger;

绞吸式挖泥船疏浚动态特性与仿真系统设计

350 m~3/h (split type) cutter suction dredger;

350m~3/h(分体)绞吸式挖泥船

A trailing suction hopper dredger is one of the most popular dredging tools for regulati.

耙吸式挖泥船是最常用的清理河道港口的疏浚工具之一，它是水力式挖泥船中大型自航、自载式挖泥船，适用于水域开阔的海湾、河口，具有广泛的适用性和经济性，为世界上各个国家在较大的疏浚工程中广泛采用。

Two main reasons about the low dredging efficiency of the cupule dredging boat in low water sections are pointed out by analyzing the ejection angle and structure of the nozzle;and by changing them, the e-jection function can be advanced greatly; the ways are put forward.

通过对吸盘式挖泥船浅水航道疏浚作业时吸盘头喷嘴喷射角度及喷嘴结构的分析研究,指出了浅层开挖时工作效率低的两个主要原因,并提出了通过改变吸盘头喷嘴喷射角度及喷嘴结构可以极大的改进吸盘式挖泥船喷嘴喷射功能的方法。

Design of a Small Dredging Simulator of Cutter Suction Dredger;

绞吸式挖泥船小型疏浚仿真器的设计

Calculation for Spud-lifting Force of Cutter Suction Dredger

绞吸式挖泥船定位桩拔桩力计算方法

Drag-suction dredger 3D view system

耙吸式挖泥船疏浚作业三维显示系统

Research on Optimization and Control of Dredging Operations for Cutter Suction Dredgers;

绞吸式挖泥船疏浚作业优化与控制研究

Modeling and Simulation of Dredging Process for Cutter Suction Dredger;

绞吸式挖泥船疏浚作业过程的建模与仿真

Study on the Load and Strength Analysis of Cutter Suction Dredger s Bridge;

绞吸式挖泥船绞刀架载荷计算和强度分析

Main Loads Analysis for Cutter Suction Dredger and Compilation of Calculation Software

绞吸式挖泥船主要载荷分析及计算软件开发

Design and Study of Cutter Suction Dredger's Spud-Carriage System

绞吸式挖泥船定位桩台车系统设计和研究

Bow-blowing Technology and Benefit Analysis of the Self-propelled Trailing Suction Hopper Dredger

自航耙吸式挖泥船艏吹施工工艺及效益分析

Discussion on the subdivision and towing safety of the non-self propelled cutter-suction dredger

非自航绞吸式挖泥船分舱与拖航安全性探讨

Designing & Simulation Experimental Study of Cleaning Silt Cutter with Environmental Protection for Cutter-suction Dredger;

绞吸式挖泥船环保清淤刀具的设计与模拟实验研究

Mathematical Model and Simulation System Design for the Dynamic Behavior of a Cutter Suction Dredger During Dredging;

绞吸式挖泥船疏浚动态特性数学模型建立与仿真系统设计

Cutter Suction Dredger Shaft Alignment and Vibration Calculating Analysis and Research

大型绞吸式挖泥船绞刀轴校中与振动计算分析研究

Study on the Structural Strength Evuluation and Standardization of Cutter Suction Dredger

绞吸式挖泥船的结构强度评估研究和标准化探讨

Cutting Force Calculation of the Cutter Suction Dredger Based on 2-D Soil-cutting theory

基于二维切削理论的绞吸式挖泥船绞刀头载荷分析

hydraulic dredging

用吸扬式挖泥船挖泥疏浚

bucket ladder dredger

链斗挖泥船斗式采泥器

Discussion and optimization of new-type dredging locating mode for cutter suction dredgers

绞吸挖泥船新型施工定位方式的探讨及优化