The process conditions,including presintering temperature,sintering temperature and time,cooling mode and pretreatment were studied.
对烧成过程(预烧温度、烧结温度及保温时间、降温方式)及预处理工艺进行了研究。
The influence of presintering powder,Mg content and sintering temperature on microstructure of target is studied by scanning electron microscopy(SEM) and X-ray diffraction(XRD).
以纳米级的ZnO、MgO和Al2O3粉体为原料,经过湿式球磨得到了混合粉体,采用常压固相烧结的方法制备了高致密度MgxZn1-xO:Al陶瓷靶材,研究了预烧粉体、Mg掺杂量和烧结温度对靶材微观结构和性能的影响。
Ti-Mn-Cu substituted barium ferrite have been prepared in condition of different preheat temperature by coprecipitationt method.
本文用共沉淀法,在不同的预烧温度下合成了Ti、Mn、Cu掺杂的M-型钡铁氧体,考察了在不同预烧条件下,铁氧体的形成情况,以及离子的掺杂对铁氧体的磁性能的影响。
The effects of calcination and sintering technique on the dielectric properties of (Zr08Sn02)TiO4 system ceramics were investigated.
研究了预烧和烧结工艺对(Zr0。
Without calcination of TiO2 and BaCO3, a mixture of pre-reaction powders (PbO+ZnNb2O6) and TiO2 and BaCO3 was pressed and sintered directly.
采用改进的工艺路线制备了化学计量比的Pb(Zn1/3Nb2/3)O3-PbTiO3-BaTiO3陶瓷,二氧化钛和碳酸钡不经过预烧,与预反应粉体混合球磨,成型后直接烧结,在1100℃和1120℃分别保温1 h,2 h,4 h获得了100%钙钛矿结构的PZN-PT-BT陶瓷,最大密度7。
The effect of precalcination on properties of low-temperature sintered materials was studied.
采用两种氧化物低温烧结工艺合成Z 型平面六角结构铁氧体材料,研究了不同预烧工艺对低温合成Z 型平面六角结构铁氧体材料的影响;通过XRD、SEM、HP4191A 研究了材料的结构、晶粒形态及有关磁性能( μ、Q) ;探讨了影响低温烧结铁氧体材料磁性能的可能因素。
The post-processing of indirect SLS includes debinding, pre-sintering, high temperature sintering and metal infiltration.
间接法选择性激光烧结技术制备金属件的后处理工艺包括脱脂、预烧结、高温烧结以及渗金属。
To cook in advance or partially.
预烧预先或部分地烧煮
An integrated prediction model for burn-through-point in lead-zinc sintering process
铅锌烧结过程烧穿点的集成预测模型
Numerical Simulation on Premixed Catalytic Combustion of Methane in Micro-combustor;
微型燃烧器内甲烷预混催化燃烧的数值模拟
Roasting pretreatment of high-sulfur bauxite and digestion performance of roasted ore
高硫铝土矿的焙烧预处理及焙烧矿的溶出性能
Numerical investigation of premixed catalytic combustion of methane in micro-combustor
微型燃烧器内甲烷预混催化燃烧的数值研究
A Study of the Predictive Control of a Boiler Combustion System through the Correction of a Forecast Error
用预报误差校正的锅炉燃烧系统预测控制研究
air inspirated premix burner
自吸式空气预混合燃烧器
Premixed Flame Combustion Instability and Its Active Control;
预混火焰燃烧不稳定性及其主动控制
Study on the Pre-oxidizing Treatment of Carbonaceous Gold Ore by Chlori-oxidition Roast;
碳质金矿氯化—氧化焙烧预处理的研究
Neural Network Generalized Predictive Control for Boiler Combustion System;
神经网络广义预测锅炉燃烧控制研究
Market prediction and cost analyse of debris brick;
煤矸石烧结砖的市场预测及成本分析
Research on Roasting Pretreatment of Bauxite Performance under High Magnetic Field
强磁场焙烧预处理铝土矿的性能研究
Prediction and Optimization of Furnace Combustion for 300MW Unit Boiler
300MW机组锅炉炉内燃烧过程预报及优化
Numerical Simulation of the Mixed Combustion in the DDC-ILC Precalciner
DDC-ILC型预分解炉混合燃烧数值模拟
Smdy on The Influence of Rehabilitation Nursing Intervention on the Patients with Deep Burn
康复护理干预对深度烧伤病人的影响
Numerical study of low emissions for twin annular premixing swirler combustor
双环预混旋流低污染燃烧室数值研究
Precombustion technology for 240 spark plug gas engine
240火花塞式燃气机预燃燃烧技术研究
Application of alloy powder in free-sintering diamond products
预合金粉末在冷压烧结制品中的应用
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号