for connections to brazed vessels是什么意思

网络释义

用法例句

In this paper, the mechanism and technology of brazing hydrogenated TC4 titanium alloys were been studied according to its characteristic using three diffenent filler metals.

本文根据置氢TC4钛合金组织以及性能特点,对其进行了钎焊连接。

openings for connections to brazed vessels

用于对钎焊容器的连接开孔

Research on PdNb Alloy Brazing Material Used for Cathode Welding of Vacuum Electron Devices

真空电子器件阴极焊接用PdNb合金钎焊料的研制

Study on the new type soldering acid and filler metal for restoration of ancient bronze;

古代青铜器修复钎焊用钎剂与钎料的改性研究

This paper introduces the connection using the brazing technique, selects corresponding brazing filler metal and flux together with proper technology, and determines the techniques and measures.

介绍了采用钎焊的方法进行连接;选择了相应的钎料与钎剂;并确定了工艺及措施。

Vacuum Brazing of 42CrMo Steel and YG8 Hard Alloy

YG8硬质合金与42CrMo钢的真空钎焊连接

Affect of Different Solder on Intension of Cu/W Brazing Joint

不同焊料对Cu/W钎焊接头强度的影响

Weldability and Microstructure of Copper Joints Welded by Two Kinds of Phosphor-copper Brazing Filler Metal

两种铜磷钎料对紫铜钎焊的焊接性能和焊缝组织对比

Effect of Cr on Property of Stainless Steel Joint Brazed with Series Ni-P Filler Metal

Cr对Ni-P系钎料钎焊不锈钢接头性能的影响

CO_2 laser brazing galvanized steel sheets with different spot modes

不同光斑模式的CO_2激光在镀锌板钎焊连接中的应用

The Brazing Technics of the EGR Cooler and the Study on the Corrosion Resistance of the Brazed Joint;

废气再循环（EGR）冷却器的钎焊工艺及钎焊接头的耐腐蚀性研究

Wrot copper performs well in high temperature applications and is easily joined by soldering or brazing. Wrot coper is exclusively used for fittings.

在高温环境下,铜也表现很好,而且易于通过焊接或钎焊进行连接。铜专门用作配件材料。

A Study of Brazing Process and Mechanism of Si_3N_4 Ceramic Using High-Temperature Filler Alloy;

高温钎料钎焊氮化硅陶瓷的连接工艺及机理研究

Effects of Brazing Temperature on Vacuum Joint Microstructure and Microhardness of Inconel Superalloy

钎焊温度对镍基合金真空钎焊接头组织及硬度的影响

Influence of Cu on Properties of Zn-Al Solders for Al/Cu Brazing

Cu元素对铝/铜钎焊用Zn-Al钎料性能的影响

Inner hole weld" was a new process for the adjacent of tube to tube-sheet of pressure vessels.

内孔焊”工艺是压力容器中管与管板连接所采用的一种新兴工艺。

YS Automatic Girth Welder (YS-AGW-I/II) is mainly used in horizontal girth inside / outside welding of large tanks、vessel etc. The welder applies submerged arc welding.

型埋弧自动横焊机采用埋弧横向焊接工艺，主要用于大型储罐、容器等内外环缝的焊接.

holes in joints of welded vessels

焊接容器接头处的孔

Joining Strength and Microstructure of Sintered SiC/SiC Joints Prepared by Active Brazing Process

活性钎焊法连接碳化硅陶瓷的连接强度和微观结构