Analysis of factors for controlling section size of RC frame columns in seismic zone;
钢筋混凝土抗震框架柱截面尺寸控制因素分析
Optimizing the section size and chosing the nearest shape are the development direction of continuous casting.
论述了连铸方坯对不同产品用途、规格所需的压缩比,分析了矩形连铸坯截面优于方形坯;指出优化截面尺寸,选择近终形截面连铸是发展方向。
During design phase of gravity retaining wall, relatively correct retaining wall section size can be obtained by repeated trial calculations.
在重力式挡土墙设计中,设计者往往要经过反复试算才能得到相对合理的挡土墙截面尺寸,为避免反复计算的麻烦,对尺寸问题进行了探讨。
Study on flexural performance of partial steel fiber reinforced concrete beams
钢纤维增强部分截面混凝土梁抗弯性能研究
sampling cross-section [station]
取样横截面[部位]
any shape that is triangular in cross section.
横截面部分是三角形的任何形状。
Reducing Oversize-chin by Partly Mandibular Outer Plate Osteotomy
下颌骨部分外板截除术治疗下面部宽大
THE FREE VIBRATION ANALYSIS OF A BAEM PARTLY IMMERSED IN A FLUID ON COUPLED ELASTIC FOUNDATION
部分水下弹性支承等截面梁柱的自由振动分析
Cross Section Design of Partially Prestressed Concrete (PPC) Highway Bridges
部分预应力混凝土公路桥梁的正截面设计
Analysis on the Response of Double Span Portal Steel Frame with Tampered Members under Local Fire;
双跨变截面门式钢刚架局部火灾下的反应分析
Research on Fatigue Bahavior in Normal Section of P.P.C Beam with Mixed Reinforcement;
混合配筋部分预应力砼梁正截面疲劳性能研究
CROSS SECTION STRENGTH CALCULATION OF PARTIAL BONDED PRESTRESSED CONCRETE BEAM ON DYNAMIC LOADING
抗动载部分预应力混凝土梁正截面强度计算
Local Buckling and Inelastic Interactive Buckling between Local and Global Buckling of Tee Beams;
T形截面梁的局部屈曲以及局部和整体弹塑性相关屈曲分析
Hooks and the Section of Auslander-Reiten Components;
钩子与Auslander-Reiten分支的截面
a loose hooded cloak worn with a half mask as part of a masquerade costume.
和作为舞会服装一部分的半截面罩一起穿戴的、有宽松头巾的斗篷。
Checking Parameter and Optimizing Design to Selective Cross Shaft Road Header Cutting Head Design;
部分断面横轴悬臂式掘进机截割头设计参数的验算与优化设计
Calculation and Analysis on Local Stability of I-shaped Compression Member Web in Steel Truss
钢桁架工字形截面受压杆件腹板局部稳定计算与分析
A transverse section of the kidney shows it to be composed of three distinct regions. The outer region is the cortex.
肾脏的横切面显示出它由3个截然不同的部分构成。外面部分是皮质。
Study on the Strength of Normal Section and Diagonal Section of Reinforced Concrete Shear Wall;
钢筋混凝土剪力墙正截面及斜截面承载力分析
Study on the Cross-section and Oblique-section of Steel Reinforced Concrete Short-leg Shear Wall;
型钢混凝土短肢剪力墙正截面斜截面分析
On the cross section of the die, the flow centre lies in the region where the flow resistance is lower, and the extrusion velocity is higher over there.
结果表明:口模截面上流动中心位于流动阻力较小的部分,而且这部分的流速较快;
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号