Analysis on failure of supporting bolt for compressor cylinder;
压缩机缸体支撑螺栓失效分析
Front Retractor Anchor Bolt
前皮带卷收器支撑螺栓
Remove cylinder attaching bolts and remove cylinder from support plate.
拆卸分泵附接螺栓并从支撑板上拆卸分泵。
Except form ties bolt, lateral bracing should set up for supporting that has three lines which is up, medium and down.
11除对拉螺栓外,设置辅助侧向支撑进行支顶,上中下三道。
LDP Pump Bracket Nuts/Bolts
LDP泵支架螺帽/螺栓
Support Cushion/Bracket Nuts (Manual)
支撑垫/托架螺帽(手排)
LEFT ENGINE MOUNT BRACKET LOWER BOLTS
左引擎固定支架下螺栓
Bolt, X-member/rear support
螺栓,X型构件/后支架
This can be examined by temporarily loosening the mounting bolts and test-run the system to look for any reductions in the noise.
这些可以通过临时松动丝杠支撑座的固定螺栓查看噪音是否下降以得到确认。
Remove nuts, U-bolts and spring bracket from axle.
由车轴拆下螺帽,U型螺栓和弹簧支架。
fid:a square bar used as a support for a topmast.
"桅栓:方木条,用来支撑中桅."
A square bar used as a support for a topmast.
桅栓方木条,用来支撑中桅
"Bolts,screws & nuts"
"螺栓,螺丝及螺帽"
Position the fog lamp in the support bracket and install the screws.
将雾灯固定于支撑架上并安装螺丝。
Remove nut securing pedal shaft in support bracket.
拆卸支撑托架上连接踏板轴的螺帽。
Remove the upper suspension arm nut and bolt at the axle bracket.
从车轴支架上拆去上端悬吊臂螺帽和螺栓。
Remove the lower suspension arm nut and bolt from the axle bracket.
从车轴支架上拆去下端悬吊臂螺帽和螺栓。
Tighten the engine mount-to-bracket bolts.
拧紧引擎架至支架的螺栓。
Anchor/support bolt holes are located in base of body.
固定器/支架螺栓孔位于阀门的基座。
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号