The paper introduces the induction hardening process of driveshafts of 80 90 & 90 100 tractor.
对 8 0 -90和 90 -1 0 0拖拉机驱动轮轴感应淬火工艺进行了研究 ,在消化吸收国外有关技术资料的基础上 ,进行了感应器结构的设计和分析 ,工艺试验及检测结果表明 ,感应器结构设计合理、加热效果好 ,较好地解决了大台阶轴淬硬层不连续的问
The off-boresight drive signal is a kind of modulated signal with the charaeteristics of low frequency,small amplitude and liable to be interferenced.
离轴驱动信号是一种频率低、幅值小、易受干扰的调制信号,在信号检测中通常是测试的难点。
Analyzing the practicability of oil motor driving spindle;
油马达驱动主轴可行性分析
This paper introduced the design of the driving system of a warp beam in which a step-motor was adopted as the let-off motor.
介绍了采用步进电机作为送经电机的织轴驱动系统的设计。
The force required to turn the beam is supplied by the tension in the warp yarns.
织轴的转动靠的是经纱张力的驱动。
Thus a normal loom has two shafts. The main shaft(crankshaft or top shaft) drives the lay mechanism and is geared to another shaft which operates at half of the speed of the crankshaft.
这样,普通织机应具备两根轴,主轴(曲拐轴或位于上部的轴)驱动筘座并通过齿轮驱动另一根轴。
Drive axle (4WD), tube axle (2WD)
驱动轴(4轮驱动),管轴(2轮驱动)
shaft-driven oil pump
主轴(驱动的)油泵
hydraulic center-shaft winder
液压中轴驱动卷动机
End play in drive pinion bearings.
驱动小齿轮轴承的端隙。
Drive shaft fuel injection pump
驱动轴式燃油喷射泵
Steering Knuckle Separation From Driveshaft
转向关节与驱动轴分离
Distributor Driveshaft Bushing Installation
分电器驱动轴衬套安装
axle generator regulator
轴驱动发电机调节器
center and rear-axle drive scraper
中、后轴驱动式铲运机
hydraulic power take-off
液压驱动功率输出轴
An intermediate shaft between the powered and driven shafts in a belt drive.
副轴,天轴传送带上介于动力轴与驱动轴之间的中间轴
the axle of a self-propelled vehicle that provides the driving power.
自驱车辆提供驱动力的轴承。
In this system the loom physically drives the warp beam through a gear system to feed warp yarns at a predetermined rate.
在该机构中,织机通过齿轮系统直接驱动织轴,将经纱按既定速度送出来;
A short shaft that transmits motion from a motor to a machine, especially in an automobile.
传动轴,驱动半轴从马达传送动作给机器的短轴,尤指汽车
An Analysis on Driving System for High Speed Motor Car Bogies with Cardan Shaft
万向轴式动力车转向架驱动系统分析
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号