casting是什么意思

网络释义

用法例句

Al 2O 3/YSZ composites were fabricated using aqueous gel-casting compound out situ technique.

采用水基料浆注模、凝胶离位复合法制备Al2 O3 /YSZ材料 ,工艺关键是高质量水基料浆的配制、注模和凝胶固化的物理—化学过程的控制。

Design and process of the injection mold according to UG;

基于UG的注塑模具的设计及加工

Automatically determining parting line in injection mold design using the finite element method;

有限元方法在注塑模具分型线确定中的应用

Research on the Green Manufacturing Method of the Injection Mold;

注塑模具的绿色制造方法研究

Design of ejection device of fixed mold in injection mold;

注塑模定模顶出机构设计

The Design of injection mold of slender tube plastic parts with thread;

带有螺纹的细长管类塑件注塑模设计

Optimum gate design of the storage-box injection mold based on CAE technique;

基于CAE技术的收纳盒注塑模浇口优化设计

Development of injection mould for complex surface shaft based on Pro/E;

基于Pro/E的转轴注射模设计

Development of injection mould for saloon armrest decorative strip;

轿车扶手饰条注射模设计

Design of injection mould for plastic articulated type bottle cap based on CAE analysis;

基于CAE分析的铰链式塑料瓶盖注射模设计

The injection mould design for handset bottom based on Pro/E;

基于Pro/E的电话听筒下壳注塑模设计

Pro/E-based design of injection mould for diagonal tee connector;

基于Pro/E斜三通管件注塑模设计

The inhibition of oxygen,which occurred in gel casting during the formation of polymer networks through in-situ polymerization of monomers in air,was successfully prevented by adding a proper amount of polyethylene glycol(PEG) to the pre-aqueous acrylamide solution.

采用凝胶注模工艺制备Al2O3陶瓷过程中,在单体和交联剂的预混溶液中加入适量的聚乙二醇(PEG),能有效克服单体聚合的氧阻聚问题,从而消除陶瓷坯体的表面起皮现象。

In this paper, process of the gel casting dosage of the organic material and the primary conditions control are interviewed, and advantages of the gel casting are enumerated.

系统地叙述了凝胶注模成型工艺的工艺过程、主要用料和工艺过程中一些关键条件的控制,对其工艺特点进行了说明,并在多方面与其它几种常用的成型方法进行比较;简单介绍了微波介质陶瓷的发展过程和成型工艺的研究现状;详细分析了凝胶注模成型工艺的成型原理和将其应用于微波介质陶瓷领域的优势,并对其应用前景进行了展望。

The influence factors of gel casting ZTA green body are investigated.

通过测量含不同种类和质量分数粉末浆料的粘度,坯体的密度和线性收缩率,研究了用凝胶注模成型的ZTA陶瓷坯体的影响因素。

fully automatic plastic injection moulding machine

全自动注塑机；全自动压注模塑机；塑料注塑机

HF moulding technology and equipment

高频注模技术及设备

injection or compression type of moulds for rubber or plastics

橡胶或塑料用注模或压模

A mold for the setting of concrete.

模板浇注混凝土的模板

After injecting astragalus in the points, prepared model by hypodermic injection of scopolamine.

穴位注射黄芪注射液后,皮下注射东莨菪碱造模。

The molten metal may enter the ingot mould in two ways: from the top and from the bottom.

钢液注入钢锭模可采用两种方式:上注和下注。

The Secondary Development of Autocad for Feed System of Injection Mold;

注塑模浇注系统的AutoCAD二次开发

Design of Injection Mold Gating System of the Plastic Gear Based on MoldFlow Software

基于MoldFlow塑料齿轮注射模浇注系统设计

The Design and CAE Analysis in Multy-carities Injection Moding Feed System

多型腔注塑模浇注系统设计及CAE分析

Injection mould for plastic large-size mould bases-Mould plates

GB/T12555.4-1990塑料注射模大型模架模板

Injection mould for plastic large-size mould bases-Standard mould bases

GB/T12555.1-1990塑料注射模大型模架标准模架

Theory Model and Numerical Simulation of the Filling of Micro Injection Molding;

微注塑成型充模理论模型与数值模拟

Fixate a faint object.

注视一个模糊的东西

runnerless injection molding

无流道赘物注射模塑

information processing model of attention

注意的信息加工模型

Injection mould for plastic large-size mould bases-Specification

GB/T12555.2-1990塑料注射模大型模架技术条件

Injection mould for plastic large-size mould bases-Support plates

GB/T12555.5-1990塑料注射模大型模架支承板

Injection mould for plastic large-size mould bases-Stop plates

GB/T12555.15-1990塑料注射模大型模架限位块