Formulating of Recipe of β Crystal Form Nucleation of Polypropylene Resin;
PP树脂β晶型成核配方设计
The nanocomposites composed of polypropylene(PP),ethylene-propylene-diene terpolymer(EPDM) and nano-Mg(OH)2 particles were prepared by melt blend dynamic vulcanization method.
采用动态硫化法制备了聚丙烯/三元乙丙橡胶/纳米Mg(OH)2复合材料,通过力学性能测试、差示扫描量热仪(DSC)分析等手段,对纳米氢氧化镁填充EPDM/PP的力学性能以及结晶与熔融特征进行了研究,通过透射电镜考察了纳米Mg(OH)2在EPDM/PP体系中的微观结构。
Because the core (special copolyester) could be dissolved in alkaline liquor, after the core's being dissolved, the PP hollow fibers with hollowness of 30 % ~ 50 % and lower density were obtained .
采用复合纺丝法制备了以PP为皮层、以特殊改性共聚酯为芯层的皮芯结构复合纤维;然后,利用芯层在碱液中可水解的性质将芯层溶除,从而获得中空度为30%-50%的、密度更低的PP中空纤维。
Two kinds of robust PP mean absolute deviations M_1(a),M_2(a),(a∈ S~(p-1))and their asymptotic expressions are obtained,furthemore,the asymptotic distributions of M_1(a) and M_2(a) uniform for a∈S~(p-1) are derived which are supremums of the Gauss processes on S~(p-1).
对两类较稳健的PP平均绝对离差M_1(a),M_2(a),(a∈S~(p-1))进行了讨论,获得了它们的渐近表示式,并由此得到M_1(a),M_2(a)关于a一致地渐近分布为高斯过程的上界。
A intumescent paints with good adhesion for PP board was prepared by proper choice of resins,solvents, additives and flame retardants etc.
通过表面处理和选择合适的树脂、溶剂、助剂、膨胀型阻燃剂等,制备出用于PP板表面的膨胀型阻燃涂料。
"There be +NP +PP" and"NP1 有NP2";
“There be+NP+PP”和“NP1有NP2”
The Synthesis and Properties of PP-g-PVAc and PP-g-PVOH;
PP-g-PVAc、PP-g-PVOH的合成及其性能研究
Effect of Compatilizer PP-g-MAH on the Morphology and Properties of PP/PA12 System
相容剂PP-g-MAH对PP/PA12形貌及性能影响
Study on Melt Viscosity of PP and FEP/PP Blends at Low Shear Rates
PP及FEP/PP低剪切速率下熔体粘性研究
Study on PP/PVC blends compatibilized by PP-g-(DMC-co-St)
PP-g-(DMC-co-St)增容PP/PVC共混体系的研究
Effects of Maleic Anhydrite Grafted Polypropylene on the Compatibility of PP/PA6 Blends
PP-g-MAH对PP/PA6共混物的增容作用
Study on Polypropylene Toughened by VTES-g-POE
VTES-g-POE增韧PP的研究
Study on Nano-CaCO_3 Toughened PP and PP/SBS Composite;
纳米CaCO_3粒子增韧PP及PP/SBS复合体系的研究
STRUCTURE AND PROPERTIES OF(PP+EVOH)/PP BARRIER MATERIAL PREPARED BY MICROLAYER COEXTRUSION
微层共挤出(PP+EVOH)/PP阻隔材料的结构与性能研究
Study on the Mechanical Properties of PP/POE/PE/CaCO_3/PP-g-MAH Composite
PP/POE/PE/CaCO_3/PP-g-MAH复合材料力学性能的研究
Isothermal Crystallization Kinetics of Dynamically Cured PP/MAH-g-PP/Epoxy Blends
动态固化PP/MAH-g-PP/EP共混物的等温结晶动力学
Preparation and Mechanical Properties of PP/PP-g-GMA/Sisal Fiber Composite
PP/PP-g-GMA/剑麻复合材料的制备及其力学性能
RESEARCH ON POLYPROPYLENE SOLID PHASE GRAFT COMPATIBILIZED PA6/PP
共单体固相接枝PP对PA6/PP合金增容作用的研究
Effect of PP graft copolymer on phase morphology of PP/PS blending system
PP接枝聚合物对PP/PS共混物相形态的影响
Fractal analysis on compatibilization of PP-g-MAH in PP/PA 6 blending system
PP-g-MAH增容PP/PA 6体系的分形理论分析
High-melt-viscosity polypropylene prepared by PP/EPDM reactive extrusion blending method
PP/EPDM反应挤出共混制备高熔体黏度PP的研究
Nonisothermal crystallization of PP/PP-g-NH_2/nano-SiO_2 composites
PP/PP-g-NH_2/纳米SiO_2复合材料的非等温结晶
Non-isothermal Crystallization Kinetics of PP/ PP-g-AMPS Blends
PP/PP-g-AMPS共混物非等温结晶动力学研究
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号